Question for lock blade users
-
I prefer a locking blade, safety being one reason.
also a linerlock or other blade lock that locks up tight like a fixed blade gives better "feel" to the tool. It's hard to explain but any tradies (tradesmen) out there will understand.. akin to the difference between a cheap chinese made spanner and a Stahlwille or Snap-On tool.
Personally I find the blade of the 93mm Alox knives to be just about the perfect size. now I just need to build a linerlock one... -
@kirk13 said:
Like there's not enough threads mocking me already
You're right, there's not.
:D Just kidding!!For me, I'm generally happy using a slip joint for most cutting duties, but if I'm cutting something where the back of the blade is resting up against something, or cutting at certain angles, I feel much better using something that locks. A locking blade allows you to do slightly dumber cuts.
-
@PTRSAK said:
I prefer a locking blade, safety being one reason.
also a linerlock or other blade lock that locks up tight like a fixed blade gives better "feel" to the tool. It's hard to explain but any tradies (tradesmen) out there will understand.. akin to the difference between a cheap chinese made spanner and a Stahlwille or Snap-On tool.
Personally I find the blade of the 93mm Alox knives to be just about the perfect size. now I just need to build a linerlock one...Ok,that I can understand

@derekmac said:
For me, I'm generally happy using a slip joint for most cutting duties, but if I'm cutting something where the back of the blade is resting up against something, or cutting at certain angles, I feel much better using something that locks. A locking blade allows you to do slightly dumber cuts.That too makes lots of sense

-
Fair enough guys,but DOING WHAT?
EMPs doing rescue work?
Or?
Mostly where you need the tip and could put some force behind it. In my case it happened while cutting off a zip tie off a steel pipe. Not a whole lot of room, slipped a bit and put too much force on the spine of the knife.
It was user error but the price would be a bit too much^^This. I've nearly chopped the end of a finger off with a Kick doing just that.
-
I like em all! Fixed, frame/liner/clasp-lockers, slip joints, and friction folders.

-
@microbe said:
I like em all! Fixed, frame/liner/clasp-lockers, slip joints, and friction folders.
I agree with this as well ^^^
I do like the safety of a locking blade while working especially when pulling the full blade across material say for instance like rope or when exerting pressure in odd angles. I used to use a recruit nearly full time till I got my Wenger S10 and it was this knife that won the right to sit in pocket for work purposes. I think for many reasons fixed blade would be best as I think kitchen knives, hunting knives, sport knives ( fishing, camping ), so a locking blade is the best of both worlds for me. Now that's now to say when I use a locking knife I don't treat it with respect its just a built in layer for me when I using it harder.
-
Well if you want to carry a large blade it makes sense to have a lockblade. An 8 inch blade as a slipjoint would need a crazy strong spring. Easier at that point to have a locking mechanism.
I carry a full size benchmade griptilian and love it. It would be weird as a slipjoint since you cant one hand open them, then. So I guess the answer Im giving you is that its convenient to have a one hand opening blade that locks. It can't be fixed as then its too big to carry the same way, and cant be a slipjoint as it cant be easy one hand open with large resistive spring. A friction folder could be one hand open, but most people arent going to want that.
-
I like the smoothness of the opening vs. most slipjoint knives. Most lockblades also offer one hand opening, which some slipjoints do, but many don't. The added safety of the lock is also comforting when getting in to more intense....um...projects :D
-
@captain spaulding said:
This. Not just for protection from humans but animals as well.I agree completely, in another thread I mentioned a time when I was at the scene of a pitbull attack...
I would additionally suggest that when it comes to any tool, I always try to use the most technologically advanced version of the tool that I am able. I don't use a crank drill to install things on my walls I use a power drill. I don't use a hand saw to cut wood, I use some kind of power saw.
Using a slip joint knife when I can use a locking knife is a step in the wrong direction for me. I understand why people who can't legally carry a locking knife carry what they carry.
Even if I lived in a place where I could carry a gun for defensive purposes I would still carry a locking knife for cutting tasks.
-
Very well said Philthy.

-
Mainly, I like One Handed Opening (I can't say I -need- it, but I like to have it :) ) and that rules out most slippies.
-
@styx said:
Just another safety feature for when I get a bit reckless or don't really have the possibility to be as mindful of what I'm doing as normally.Now I'll be the first to admit that in 90% of the cases a SAK or slippie would have been perfectly fine for my EDC. It's that 10% though as I had a close call with a Douk Douk (a reason why I'm thankful for it's mid stop point)
What was the model? I got a large one and the spring in it is terrific! You really need to make a lot of pressure to get it to close (even only half way).

-
@captain spaulding said:
This. Not just for protection from humans but animals as well.
I agree completely, in another thread I mentioned a time when I was at the scene of a pitbull attack...
I would additionally suggest that when it comes to any tool, I always try to use the most technologically advanced version of the tool that I am able. I don't use a crank drill to install things on my walls I use a power drill. I don't use a hand saw to cut wood, I use some kind of power saw.
Using a slip joint knife when I can use a locking knife is a step in the wrong direction for me. I understand why people who can't legally carry a locking knife carry what they carry.
**
Even if I lived in a place where I could carry a gun for defensive purposes I would still carry a locking knife for cutting tasks.**Nah, you should use short machinegun bursts to do it. *That *is the most technologically advanced version of a cutting tool...
-
-
I think what's Styx said earlier in the thread pretty much sum up what I dislike about a slip joint knife(also where a 'stabbing' motion is needed, like making a hole).
The interesting thing is--if all the 91mm SAK has a duller tip like 'my first SAK' or '111mm Trekker', then I will most likely to think of 91mm SAK blade as strictly a 'cutting' blade vs what I could do with a locking blade.
-
Lock on a folder is a clumsy knife nut's best friend
-
been giving this question some thought while going about my day, see Kirky some of us DO listen to you ! And i'd like to answer the question with a question.
do you mean "why do people need to carry Both locking and non locking blades ?" (at the same time)
i often EDC a multitool with locking blade, not because the blade locks specifically but because i like that particular tool, same with my choice of pocket knife. i do feel more confident using a lock blade, i like most here i'm sure, have been 'bitten' and still have at least one scar from an unexpected 'closing' ::)
i wouldn't feel i 'need' a Large lock knife to accompany my any of my favourite EDC's. since most of my cutting needs could be achieved with a small non locking blade (even a Vic classic or similar) i'd rather have a selection of 'tools' above one large blade. i do however like OHO blades because i often find i want to 'cut' something but only have one hand free. (ie up a ladder holding on for dear life) -
I carry a lock blade for cutting construction materials.
its just safer
-
Way more safe.
I also carry one because, my sak or multi just won't handle the task or dulled out fast on a task rather quickly. Having that extra blade is nice. (Jammed up haybine) And yes I have dulled all of my blades I carry in matters of minutes when I have been in the fields tons of times.
sent from Nate's mobile
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login