The Wood Working Thread
-
@derekmac said:
It really is scary! My kids are 6&4, but they find the power tools too loud so they don't really want to be in the garage while I'm working.I try and keep the tools in safe mode too. Blades down/covered, chisels in the tool box, ect. They also know not to touch or go near anything, but in your mind you know there's always the chance.
Sent from my iPhone 5 using Tapatalk
I only got out of the building trade not 10 months ago. Upto that point, my son had grown used to me in my work gear, constantly sorting tools out in the van for the next days job - but in all that time I rarely if ever did work at home.its just too risky..... There's no second chance.
I heard a story....
Fella's in his garage beavering away with the circular saw. Dust mask, goggles, ear defenders the works!! Finishes the cut a pulls the saw up and back behind himself when he realises the saw has banged against something....... Turns and see's his young granddaughter rubbing her head.......the blade was still spinning inside the guard!!
Easy as that.
-
This is just to get me subscribed. I will be posting pictures in the next day or so. The Bosslady (and I) really enjoy woodworking.
-
I have been doing a few things in recent months and some are detailed in these threads.
my latest.. particularly suitable for this thread mixing MT's and woodwork.

-
A bar for when the working is done
<a href="http://s1309.photobucket.com/user/Peter_Thorpe/media/20131028_162450_zpsddc4f4f8.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1309.photobucket.com/albums/s640/Peter_Thorpe/20131028_162450_zpsddc4f4f8.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>A "Table for Two"
<a href="http://s1309.photobucket.com/user/Peter_Thorpe/media/20131107_150432_zpseb0e3b0e.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1309.photobucket.com/albums/s640/Peter_Thorpe/20131107_150432_zpseb0e3b0e.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>and the best Pic I have of a full size 6 seater Dining table.. Sold before I could get a photo with its legs on.
<a href="http://s1309.photobucket.com/user/Peter_Thorpe/media/20131107_150531_zpsa99bcd74.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1309.photobucket.com/albums/s640/Peter_Thorpe/20131107_150531_zpsa99bcd74.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> -
Your tables look great Peter!

I've made some progress on my side tables today.
I have the edges all routed now.
<a href="http://s1077.photobucket.com/user/derekmachfx/media/Wood Working/C2B5D3E7-C1D7-420E-B27D-E61D55683D2E_zpsfoahiqae.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1077.photobucket.com/albums/w472/derekmachfx/Wood Working/C2B5D3E7-C1D7-420E-B27D-E61D55683D2E_zpsfoahiqae.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a><a href="http://s1077.photobucket.com/user/derekmachfx/media/Wood Working/5CF734A7-ECEA-4AE2-8D3A-F5213804997A_zpszqn20vhg.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1077.photobucket.com/albums/w472/derekmachfx/Wood Working/5CF734A7-ECEA-4AE2-8D3A-F5213804997A_zpszqn20vhg.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Here's a rough idea of how the bottoms of the tops will look.
<a href="http://s1077.photobucket.com/user/derekmachfx/media/Wood Working/21F1B368-2FDA-4001-ADBD-0337109E11A5_zps5yiaaq4q.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1077.photobucket.com/albums/w472/derekmachfx/Wood Working/21F1B368-2FDA-4001-ADBD-0337109E11A5_zps5yiaaq4q.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Getting these glued up are ready to mount to the table tops.
<a href="http://s1077.photobucket.com/user/derekmachfx/media/Wood Working/4BAA1EEF-40EA-45C7-B693-A80439D60514_zpsv6plzejm.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1077.photobucket.com/albums/w472/derekmachfx/Wood Working/4BAA1EEF-40EA-45C7-B693-A80439D60514_zpsv6plzejm.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>I'm still trying to decide on what I want to do for legs. I don't want plain straight legs, so I was thinking of a slight taper at the bottom, and maybe a bit of router work on the edges, but nothing too noticeable, just enough to break the hard lines.
-
I've done a little bit of work, but they are mostly functional related like edge for new floor, wall shelf for basement, and the the footboard you've all seen. Nothing as fancy as those posted here. :-[
I think I've finally found a proper lumberyard though, but it's kinda far, and it's too cold to work outside anyway so I haven't checked it out.
Also would like a circular saw and a bandsaw, but no more storage space...
-
Well the top is assembled now, and I've got the basic design of the legs cut out. It's not perfect, but I think that can be expected when the wood is from crates and pallets that I had to pull staples and nails out of. I'm actually really happy with how it's coming along, as I had no plans, and was just going from ideas in my head.
<a href="http://s1077.photobucket.com/user/derekmachfx/media/Wood Working/965AFBE2-FD8C-465C-BF5F-060FCA830924_zpseqedm56x.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1077.photobucket.com/albums/w472/derekmachfx/Wood Working/965AFBE2-FD8C-465C-BF5F-060FCA830924_zpseqedm56x.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1077.photobucket.com/user/derekmachfx/media/Wood Working/7B88F12E-4AFA-48DC-834C-6C9C4BBDCB6A_zpsyzisxih3.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1077.photobucket.com/albums/w472/derekmachfx/Wood Working/7B88F12E-4AFA-48DC-834C-6C9C4BBDCB6A_zpsyzisxih3.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s1077.photobucket.com/user/derekmachfx/media/Wood Working/51A167E8-73E3-42BA-BB1C-19E036DBDA39_zpsn41yeash.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1077.photobucket.com/albums/w472/derekmachfx/Wood Working/51A167E8-73E3-42BA-BB1C-19E036DBDA39_zpsn41yeash.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
And here's one finished table. Now for a quick final sanding, then stain.
<a href="http://s1077.photobucket.com/user/derekmachfx/media/Wood Working/9CADFD28-02A5-40A4-9FEA-7801970F9F00_zpsdaivmeuw.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1077.photobucket.com/albums/w472/derekmachfx/Wood Working/9CADFD28-02A5-40A4-9FEA-7801970F9F00_zpsdaivmeuw.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> -
Nice job derekmac! Looks good. JR
-
I enjoyed woodworking growing up too, unfortunately I have no space for a workshop here :(
Guess that limits me to smaller projects...
-
@MadPlumbarian said:
Nice job derekmac! Looks good. JRThanks JR. I had a really hard time trying to figure out what to do with the legs. I ended up just doing a double taper on the bottoms, and a round over on the edges. It's not as fancy as I wanted, but routing a fancier edge proved hard with the double taper.
@Whoey said:
I enjoyed woodworking growing up too, unfortunately I have no space for a workshop here :(Guess that limits me to smaller projects...
You really do need quite a bit of room to have a half decent setup going. We have a two car attached garage, and even that's really not big enough for what I have, and I still need to get my bandsaw and lathe.
-
I enjoyed woodworking growing up too, unfortunately I have no space for a workshop here :(
Guess that limits me to smaller projects...
You really do need quite a bit of room to have a half decent setup going. We have a two car attached garage, and even that's really not big enough for what I have, and I still need to get my bandsaw and lathe.
Unfortunately I'm in an apartment building, my garage is communal. The bigger issue is constant cleanup in between stages, sometimes you need to put things down for a bit to do something else, and here that requires cleaning everything up which usually takes more time than you can dedicate to a project, that and the setup time required as well.
I'd love to have a true workshop/private garage off a house... or even a small warehouse in an industrial estate or similar.
-
I'll join in...this summer I was house sitting for 3 weeks, a friend and long time wood workers house. He has a large wood shop, so I was able to go to town for a few weeks.
Cedar Coat hanger, with tiny hand painted people

Wood Letter Opener with scroll saw work.

Then I went to town on about 8 band saw boxes...here are highlights...


Cedar log with custom shelf/storage


Square box

I also do a little chip carving and wood burning.....jewelry box for the lady



Burned from this picture at Rock state park MD

-
Wow. Awesome work.

-
Wow! Fantastic work guys! I'll get some pictures once the temps go up a bit. :(
-
Holy crap SupraFreak, that is some really beautiful work!

-
Beautiful work guys! I'm not much of a woodworker myself, have no place for tools at the place I'm renting. :( I sell finishing products for a living though, a lot of my customers are cabinet and furniture shops. If anyone has any wood finishing questions, I'm more than happy to answer them the best I can.
Looks like you guys have that well in hand though..... -
I have been thinking about making my own table base for my table saw, and I want to take the extension wing off of the right side, and use a laminate (or something) top and mount my router in it. In theory, I should be able to use my table saw fence with a piece of sacrificial wood attached to it as a fence for the router too.
I was thinking about trying to use SketchUp to design it, but I haven't really played around with it too much yet. Does anyone here use it?
@jerseydevil said:
Beautiful work guys! I'm not much of a woodworker myself, have no place for tools at the place I'm renting. :( I sell finishing products for a living though, a lot of my customers are cabinet and furniture shops. If anyone has any wood finishing questions, I'm more than happy to answer them the best I can.
Looks like you guys have that well in hand though.....Thanks for the offer Tom! I do happen to have a question for ya. I'm going to be applying a Minwax Red Mahogany stain to the tables, but I'd like to add some sort of protection to the top to stop liquids from soaking into the wood. I was going to use a semi-gloss Polyurethane over it, but was wondering if there's something else you'd recommend?
-
I enjoyed woodworking growing up too, unfortunately I have no space for a workshop here :(
Guess that limits me to smaller projects...
You really do need quite a bit of room to have a half decent setup going. We have a two car attached garage, and even that's really not big enough for what I have, and I still need to get my bandsaw and lathe.
Unfortunately I'm in an apartment building, my garage is communal. The bigger issue is constant cleanup in between stages, sometimes you need to put things down for a bit to do something else, and here that requires cleaning everything up which usually takes more time than you can dedicate to a project, that and the setup time required as well.
I'd love to have a true workshop/private garage off a house... or even a small warehouse in an industrial estate or similar.
I'm with you on the apartment problem, I used to have a small workshop back at our house, nothing big but I made things work, I turned a circular saw into a table saw, router into a full size table, also jig saw and drill to full size. I had to get rid of most tables and full size stuff but kept the must haves, so there sitting in the basement. Only thing that I think went bad is the batteries for the cordless drill, after not chagrin nor using it for so long,,
Here's a few of my projects, JR


My latest, it's a double sided workstation for both my paracord and leather work,






-
Polyurethane is exactly what I'd recommend Derek. If you're doing an oil-based one, give it two coats. If water-based, three coats. The oil will be more durable, but will yellow over time. The water-based won't yellow, and will dry faster as well. After applying the final coat, wait at least 48-72 hours for the poly to cure to full hardness. And always remember - DO NOT SHAKE polyurethane! Stir it! Shaking will put a ton of tiny air bubbles in the finish, and will make it a nightmare. Hope this helps.

That'll be $10, Paypal please..... :P
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



