Show off your Sak mod's!
-
WOW! You would need a backpack to tote that thing around.
-
-
Nothing goes to waste. A broken glow liner is turned into a birds head spacer. This will become standard in all of my personal builds. There is also a black g10 liner in there. Will be testing those out on a personal build soon.

-
Some new features
Glow birds head. This idea came fron a mistake but I am still pleased with it. Much happier than the liners. Less is more.
G10 linersand more of same
Stonewash
Powdercoat scales



-
There haven't been any Wenger mods in a while. :D
My Wenger Urban, 3rd version.





Comparison of thickness to the standard Wenger Traveler.

-
That's a good one Enki

-
I added a few more pics. :D
I need to source some new scales for it though as these were taken off and put back on one too many times.
The attachment point at the phillips isn't holding too good anymore. But I like those scales as they came from my first ever SAK so I might just add a drop of rubber cement there and keep them. ;) -
@enki_ck said:
I added a few more pics. :DI need to source some new scales for it though as these were taken off and put back on one too many times.
The attachment point at the phillips isn't holding too good anymore. But I like those scales as they came from my first ever SAK so I might just add a drop of rubber cement there and keep them. ;)That makes it even more special with those scales. I would probably just go with the rubber cement to keep them :)
-
I added a few more pics. :D
I need to source some new scales for it though as these were taken off and put back on one too many times.
The attachment point at the phillips isn't holding too good anymore. But I like those scales as they came from my first ever SAK so I might just add a drop of rubber cement there and keep them. ;)That makes it even more special with those scales. I would probably just go with the rubber cement to keep them :)
Agreed. :)
-
I added a few more pics. :D
I need to source some new scales for it though as these were taken off and put back on one too many times.
The attachment point at the phillips isn't holding too good anymore. But I like those scales as they came from my first ever SAK so I might just add a drop of rubber cement there and keep them. ;)That makes it even more special with those scales. I would probably just go with the rubber cement to keep them :)
Agreed. :)
I'd thought you'd vote for yellow evogrip. ;)
It's now as close to the Wenger Yeoman as I can make it.
-
Is that a Vic Phillips in there or did Wenger make one, too?
And, as I seem to have missed the first 2 incarnations - Are there any pictures of the process?! -
@enki_ck said:
I added a few more pics. :DI need to source some new scales for it though as these were taken off and put back on one too many times.
The attachment point at the phillips isn't holding too good anymore. But I like those scales as they came from my first ever SAK so I might just add a drop of rubber cement there and keep them. ;)A very small amount of Epoxy in the scale blind holes will keep the scale on perfectly.
I clamp mine till the epoxy sets. -
Is that a Vic Phillips in tehre or did Wenger make one , too?
And, as I seem to have missed the first 2 incarnations - Are there any pictures of the process?!Wenger makes a Phillips, too. It's a standard Wenger layer, Phillips and wrench ;)
Thanks. Seems I should get a few Wengers, I think.
-
Is that a Vic Phillips in tehre or did Wenger make one , too?
And, as I seem to have missed the first 2 incarnations - Are there any pictures of the process?!Wenger makes a Phillips, too. It's a standard Wenger layer, Phillips and wrench ;)
Thanks. Seems I should get a few Wengers, I think.
Out of the top of my head, the Cyclist, Nomad and S557 have it ;)
-
@lowtech said:
Is that a Vic Phillips in there or did Wenger make one, too?
And, as I seem to have missed the first 2 incarnations - Are there any pictures of the process?!I started this mod back in December 2011. :ahhh
Here's the 1 version, with saw and Vic combo tool. LINK TO POST in this thread from back then with more pictures.

I decided later on I didn't need the saw that much in an urban environment so I dropped that and the Vic combo tool, while perfectly functional didn't have that perfect snap so I replaced it with a nail file.

Not sure if I ever posted a detailed thread/post of that change and when it happened. :think:
I later decided I needed a combo tool for the locking screwdriver and opener which led to this.
Here's a thread from the beginning of the mod and I'll add a few other pictures there soon. :salute: There's a list of most models with the phillips I posted for another member some time ago.
-
Which tool has that combo tool?
That is one of my favorite mods for sure.
-
Thanks, Enki.
Rick, the 91 Vic combo tool can be found in the Compact.
-
Rick, the 91 Vic combo tool can be found in the Compact.
I think Rick is talking about the Wenger combo tool.
@rickinFL said:
Which tool has that combo tool?That is one of my favorite mods for sure.
If you want a corkscrew, Entree
If you want a phillips, Junior 10 (blunt tipped blade though, but you can source another one)
If you don't want any backtools, Picnic.
You asked me before, when I bought it and started talking about this mod, if a combo tool from a Picnic would be a simple drop in. Nope. :-\The combo tool/knife layer uses a different kind of backspring to the nail file/knife as it has to make room for the wider tool.
Here's a Picnic backspring, my modified one and a standard nail fine one. I grinded to middle one to be able to use the lock but the combo tool would stick out a few millimeters too far out when closed. So I reused another backspring from my stash.

So for easier modding, get the one with the tool set you want and just transfer the whole layer. Knife blades are the same and you can swap the butter blade for proper one.
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login