Exotic steels...why?
-
All I have to say is two words...utility knife!
-
-
Just take a look at a micrograph of the steel, that will answer a lot of your question. (All of the following given proper heat treatment yaddayaddayadda for the steels in question.) VG-10 will hold an edge (very much) longer than DIN 1.4110 (SAK steel), DIN 1.4110 will have higher impact resistance than VG-10 (not really important for pocket knives, I would assume), VG-10 can't be sharpened to an as acute edge without micro chipping, on the other hand DIN 1.4110 is vulnerable to edge rolling, etc. In general, the most popular high end steels in the US market are high alloy, high carbide steels which favor extreme abrasive resistance while not being as though as something liker ANSI 1075 or 12C27. Most of the price difference is the general marketing value, some of it is higher price of the alloy itself, and some of it is that some of the high tech steels are a smurf to heat treat. Trust me, it is not the knife industry which has developed these steels, it's all the different industries needing knives and tools, and they look at the bottom line, not cool names. An oil company looks at how long the drill lasts, that's it. This leads to the steels being actually different, but also some of the popular knife steels having expensive properties which really aren't useful as knives. (E.g. using high-speed class steels for knives... why oh why...)
TL;DR: Different steels are different. Some things cost more.
-
@Syph007 said:
As an upgrade from carbon steels that people loved (still love) to have that similar edge retention ability but in a stainless blade. Other than that, I think people love buying knives and trying out new steels.Once you own more than a couple SAKs, you probably have more than you NEED. But collecting tools and knives is not about NEED thats for sure. :D
This.
-
Exotic women...why?
Some people just like something a little more exciting! :D
Myself, it really doesn't matter. I like the added edge retention of the "better" metals, but I also like how easy it is to sharpen the "normal" ones as well. If your out in the field, maybe you'd prefer to have something a little softer that won't chip, and only takes a few swipes on a stone to sharpen. Or, maybe you're thinking that you want something that you "shouldn't" have to sharpen, so you don't have to stop working, you can keep on going.
-
One thing that I find funny about exotic steels is that some people absolutely want the newest (perhaps best) steel and act like the others are terrible.
Not that long ago 154cm was an awesome steel, then S30V, now it's like S35VN or ZDP-189 or Elmax.
I'm more than happy to stick with 154cm or VG-10 they have worked well for me over the years.
-
To me, using 'exotic' metal(or more accurately, paying for expensive steel) for blade is my attempt to tilt the balance between responsible/knowledgeable use vs emergency/occational abuse.
I know enough that using the tip of blade to pry or as an awl is a no-no, or batoning may roll or chip the edge, or dropping knife on ground tip down might bent/break the tip; but it is good to know that I do have the option to do so under stressful or emergency situation.
At the end of the day, I think what's more important is not whether the steel is 'exotic' or 'expensive', but whether the price is reasonable vs performance. If the budget allows and the exotic steel does offer better performance where I want it, I won't mind paying a premium for it. Of course, if it is for collection purposes, that's entirely a different realm. :D
-
I mainly play around with traditional knives where 440C and D2 are the common exotics. :D
Additionally you tend to see people buying the newer steels and then realising that they can not sharpen them with their old sharpeners.
Some steels are better suited to special tasks (e.g. for chopping wood you need a "forgiving" steel) so there is a reason for their selection. Most of the times it has to do with having something newer and hopefully better.
The main issue seems to be the price as knives with newer steels seem to cost more; and a lot more than the cost of the new steel justifies.
If I had the choice of a knife with 440A steel and the same knife with S30V (an older exotic) at the same price I would take the S30V one.
Google brings this summary up:
http://zknives.com/knives/articles/knifesteelfaq.shtml -
One factor I think a lot of people overlook, which from what I understand is quite important in that it makes a significant difference in how easy your cutting tasks are, is the width of the blade in total.
So not only the angle of the edge, but the entire blade. Since if you are trying to cut through something, while it may be the edge that does the cutting, friction of the material on the edges of the knife blade will increase the force you need to apply. So it is possible to compensate for a duller blade by it being thinner, in comparison to a sharper blade, which is fatter. And this links back to soft steels vs hard steels.
-
@ToolJoe said:
All I have to say is two words...utility knife!One of the reasons why utility blades and scalpels are so good at cutting is because of their very thin profile. They are not made of super steels, but even when not as sharp as they originally are, they will still feel easier to cut with than a sharper but thicker blade, because you have less friction on the sides of the blade with what you are cutting through.
-
All I have to say is two words...utility knife!
Like a Stanley?
I believe so. If my understanding is correct, are lockable blades illegal in the UK?
Yes and no. If you are stopped by a policeman and you have a knife that is over 3" or is locking then you have to be able to justify having it. If you're a chef on the way to work and you're carrying chefs' knives, that's fine. If you're a farmer and you're carrying a locking folder that you're going to be using at work, that's fine. If you're a randomer in the street, that's not. At the same time, you can carry a sub 3" slipjoint without "reason", but the moment you threaten someone with it you're breaking the law. Same with a limp carrot. If you're going around threatening someone with a limp carrot and a lettuce leaf then you're in violation of the Offensive Weapons act.
All I have to say is two words...utility knife!
One of the reasons why utility blades and scalpels are so good at cutting is because of their very thin profile. They are not made of super steels, but even when not as sharp as they originally are, they will still feel easier to cut with than a sharper but thicker blade, because you have less friction on the sides of the blade with what you are cutting through.
Aren't utility blades high carbon non stainless steel and therefore pretty hard?
-
I believe so.
-
All my utility knives have SS blades.
I do not recall seeing any carbon ones, in regular shops. -
Here is a recent thread on utility knives, by the way: :D
-
I have come to the conclusion that the best compromise for the majority of people is:
- relatively soft steel from a good manufacturer - means it will be properly heat treated, easy to resharpen, relatively cheap (and so more easy to use and abuse, and replace if need be)
- Very thin blade profile overall - will give superior cutting ability, even when the edge may not be at its sharpest
- stainless steel - corrosion resistant, no need to worry about rust with normal daily usage
Based on the above, my perfect knife is a swiss army knife blade.
-
All my utility knives have SS blades.
I do not recall seeing any carbon ones, in regular shops.I the one I ever go seem to be high carbon and rust like crazy.
sent from Nate's mobile
Yeah, my current batch of regular blades are carbon (rusty ::) ) and hook blades are SS.
The come in both varieties.
-
Blade design and edge geometry are generally more important than steel . The best steel is limited by a suboptimal heatreat .
All that said , I'd prefer 154CM with a primo heat threat , than 425 with a primo heat treat .
I'm well equipped for sharpening , so that's not too much of a factor .
Enviromental considerations factor in , ie: in a pocket enviroment , in high humidity I'd prefer H1 or 440 C to 154CM , or 630V .
My favs are 440 , 154CM , A2 , and D2 ( assuming perfect heat treat in every case ) .
Chris
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
