SAK... Why???
-
@Dale said:
I was honestly looking for the pros.. These gentlemen pointing out the awesome warranty & lack of rust were HUGE selling points. I'm OCD about rust on my multi tools. If one doesn't rust.. It will rise quickly thru the ranks. :DDale,I'm really please you've gotten a Spirit. For me the,the Spirit is the apex of the Multitool. While I have bought (too) many MTs since getting my Spirit,and my SwissTool ,none have come close to being as good! Better than 60% of us, I reckon , have had the same experience
Now you need an Alox Farmer >:D
-
I became addicted to Leatherman back in 98... I have the Mutt,ST300, Charge TTI, 2 Waves first & second gen, Skeletool, Wingman, & Kick.. I am looking to broaden my collection. I have the SOG Power assist & The X on the way. I'm sure being in here.. you fine people will point something else out I can't live without. Prolly by the end of the day.. ::)
-
Gerber MP600.
First! :D
In truth, there are a lot of good tools out there, and maybe a few 'not great' tools that i think people still ought to experience... if you can get them dirt cheap.
-
The Spirit is great, well done Dale. I have had several over the years but don't have one at the moment. I slum it with a Swisstool instead :)
-
Thanks Guys!! I know exactly what your saying.... The skeletool is prolly the worst of my leatherman. The jaws on the pliers are too narrow. It's a bit flimsy. I can feel it start to give when I I squeeze too tight. & the darn thing will rust if you get within 50 miles of water. But it looks neat so I couldnt resist.
-
Ive been a lm owner since 98 and find most of them (mainly older ones) made very well,plus great warranty
as for sak there just sooo well made and just wish my juice xe6 and s2 was made as well,ive got this battle between swisschamp vs xe6 and explorer vs s2 :ahhh -
@Zed said:
Ive been a lm owner since 98 and find most of them (mainly older ones) made very well,plus great warranty
as for sak there just sooo well made and just wish my juice xe6 and s2 was made as well,ive got this battle between swisschamp vs xe6 and explorer vs s2 :ahhhThat's easy Paul...XE6 with the Explorer, S2 with the SwissChamp
-
Now that's the spirit! Good call!
-
Ive been a lm owner since 98 and find most of them (mainly older ones) made very well,plus great warranty
as for sak there just sooo well made and just wish my juice xe6 and s2 was made as well,ive got this battle between swisschamp vs xe6 and explorer vs s2 :ahhhThat's easy Paul...XE6 with the Explorer, S2 with the SwissChamp
Good suggestion
That's how I'd probably handle it too. -
Zed, do you see that much variation in quality when it comes to the Leatherman/Victorinox full size MT's?
-
@kirk13 said:
**utterly reliable and trustworthy ,and with quality standards Leatherman ,Gerber and SOG can only dream of,and they don't cost a kings ransom **:DNailed it.
@Dale said:
I was talking to the Missus this morning as she was shoe shopping & mentioned it. She popped into Ebay & bought me this...She knew I had been looking at them. I appreciate all the input from the members here. Guess we'll see how it stands up. Not sure if it qualifies as a SAK or not.. But it should be close.
Congrats on the Spirit. The quality of the fit and finish will spoil you.
-
Thanks Shamus

-
I like my Leatherman Rebar quite a bit, and got years of deadly effort out of my Wave, but it has always come down to pliers. I rarely need pliers, so Swiss Army Knives always end up in my pocket. I've been carrying one model of SAK or another since I was 8.
I am awfully tempted by the Spirit (for my bag). Mind you, I do have to get back on my Rebar Challenge first...
-
That was my issue as well. Always needing pliers & wire cutters. If the Spirit X can meet those two needs it'll prolly be #1
-
@Dale said:
That was my issue as well. Always needing pliers & wire cutters. If the Spirit X can meet those two needs it'll prolly be #1If you're used to ST300 pliers and cutters, you'll be sorely disappointed with a Vic. I have a full size swisstool, and while every other implement on it is top notch and really puts the ST300 in a bad position, nothing beats the shear strength and cutting ability of the ST300 (sog not included, I have those as well and while the cutters are great, the pliers excellent, the tools just aren't the same as LM or Vic).
I alternate between my swisstool and my ST300 for work (cable/telecom tech), and on swisstool days I always carry my dikes. ST300 days the dikes stay in my truck.
However, I never leave home without some form of SAK anymore. Swisschamp, super tinker, tinker or CT34. They're just too perfect for pocket carry.
Add a SAK with your ST300 if wire cutting is important, and you won't be disappointed. Get a set of good dikes if the spirit will be a daily thing and you cut wire as often as I do.
Edit: I never mentioned WHY I dislike the Vic cutters. They're far too short/shallow to cut coax cable (rg6) in one bite, it takes 2-3 bites to get through it completely, and then the dielectric is all smurfed up. Forget about cutting rg11 wire with a Vic, my sog had problems with it, but managed. Conversely, cutting cat3 or cat5 with a Vic is ok if the inner wires are still in the sheath, but if I'm trying to cut those same inner wires individually, there's too much 'slop' in the plier heads. Not so with the st300. Crisp, tight and strong.
-
That was my issue as well. Always needing pliers & wire cutters. If the Spirit X can meet those two needs it'll prolly be #1
If you're used to ST300 pliers and cutters, you'll be sorely disappointed with a Vic. I have a full size swisstool, and while every other implement on it is top notch and really puts the ST300 in a bad position, nothing beats the shear strength and cutting ability of the ST300 (sog not included, I have those as well and while the cutters are great, the pliers excellent, the tools just aren't the same as LM or Vic).
I alternate between my swisstool and my ST300 for work (cable/telecom tech), and on swisstool days I always carry my dikes. ST300 days the dikes stay in my truck.
However, I never leave home without some form of SAK anymore. Swisschamp, super tinker, tinker or CT34. They're just too perfect for pocket carry.
Add a SAK with your ST300 if wire cutting is important, and you won't be disappointed. Get a set of good dikes if the spirit will be a daily thing and you cut wire as often as I do.
+1

-
Basically it comes down to this:
If you need the best pliers and cutters, go with SOG
If you want great drivers, awesome blades and the best awl on the market, Vic.
If you prefer a great all-around tool, one of the higher quality LM tools.
However, your choice in the above should directly affect, but not cancel the carry of a SAK.
That's my sincere opinion, YMMV.
Oh, and then there's gerber.
-
I actually ordered a SOG powerlock three days before getting the X
-
@Dale said:
I actually ordered a SOG powerlock three days before getting the XI like my powerlock. Good tool. Just takes a backseat to my big LM stuff and my swisstool nowadays. I carried that powerlock for over a year and beat it to hell plenty. I even dropped it from a telephone pole once. Still works fine.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login