And so it begins.... (My adventures into Alox!)
-
Will the center hole also be cut by the waterjet or do you drill it yourself?
-
-
Any plans on how you finish the springs? Batch-wise? Or the full lot in an era of eternal darkness? :D
-
@crackout said:
Any plans on how you finish the springs? Batch-wise? Or the full lot in an era of eternal darkness? :DWell the first time I heat treated these I didnt know to ask for them to be done in a vaccuum. This time I will so there should be significantly less finish work.
The first batch took ALOT of effort to get one heavily oxidized spring to polished state.

A nice size semi-pro level tumbler can be got for around 5-700. If the springs need alot of work, I might just go for it and get the tumbler to speed finish them. But I will wait to see how they are when back from heat treating.
-
Hope it all turns out good. And I wouldn't worry about Vic canceling the 93's. ;) They'll be around for a long time.
And the waterjet pricing looks interesting. I'm thinking of a MTO project that's been on hold for too long.
-
@enki_ck said:
Hope it all turns out good. And I wouldn't worry about Vic canceling the 93's. ;) They'll be around for a long time.And the waterjet pricing looks interesting. I'm thinking of a MTO project that's been on hold for too long.
I went in and dropped off the steel. Im old fashioned with this type of stuff and I really like doing business face to face and being able to discuss the job and other options.
He was a really nice and knowledgeable fellow so I cant wait to get the parts back. He said cutting brass liners would be no problem so I'm going to bring in a few square feet of brass next and give that a try. I looked at his samples of edge finishes for the various tapers and I went with the cheapest option as it looked fine to me. So I should be just around $3.25 a part if my math is correct. As long as im under $10 per finished spring Im happy. The steel was about $200, and im not sure what heat treat will be but I think a finished spring should be around $8.
-
Ok... a few updates.
Orange hard anodized is delayed for another week! :(
I got restocked on red parts though. :D


I also ground a test blade to try with that liner lock I cut....


It locks up perfectly, BUT there is a problem I didnt see ahead of time. Can you see the issue?
-
No stop pin? Locks at 90°?
-
-
You reply too fast...
Blade locks at 90°?
-
-
Maybe if you make the cut like this...

-
The locking part of the liner/scale must extend almost up to the pivot so that the 90° part of the blade doesn't lock.
And the blade has to be modified so that in the locking position the part of the blade is short enough to fit behind the locking mechanism. -
@crackout said:
The locking part of the liner/scale must extend almost up to the pivot so that the 90° part of the blade doesn't lock.
And the blade has to be modified so that in the locking position the part of the blade is short enough to fit behind the locking mechanism.Yup I think I can redo it and get it to work now that I realize that I have to account for that. :D
-
This seems to be what I need.

I can still make the long cut with the 1/16th inch bit, and the short thinner cut I'll have to use a jeweler saw.

-
Not to sidetrack from this completely awesome train, but what is the feasibility of Reamer + Scissors + Saw + Blade + Combo Tool? Should all stack correctly and be only three layers thick right?
-
@Syph007 said:
This seems to be what I need.
I can still make the long cut with the 1/16th inch bit, and the short thinner cut I'll have to use a jeweler saw.
Will you use a backspring or the liner to retain the blade inside the handles?? In the case you don't use a backspring you'll need a stop pin and a backspacer/stand off right??
-
Oh man, a locking urban Pioneer would be sick! It would make a nice combo with my Galahad padlock :p
Once you get the secret sauce down, you should bust out 10 locking pioneers and 10 locking farmers for a bit if fast cash. Then when you get the scissors springs, 10 urban pioneers ans 10 urban farmers. That should.set you up for the heater you need. :p
-
:ahhh
Looking forward for to this.
-
Wow, that looks ridiculous. I'd love to grab one of those. :gimme: :gimme: :gimme:
By the way, I finally uploaded a video I made about Bob's custom SAK I got a while back. I love this thing, and carry it most days. :D
It's a model you've all seen, but why not post it anyway?
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
