Swords and their history.
-
@Chako said:
Ninth installment - Hanwei Tinker Pearce Longsword.Here are a few longsword links to start.
http://www.lordsandladies.org/longsword.htm
http://www.worksofrichardmarsden.com/historyofthelongsword.htm
Now onto this particular sword. Tinker Pearce is a fairly well known sword maker, and he teamed up with Paul Chen of CAS/Hanwei to produce a few Tinker Hanwei collaboration swords. The biggest focus of this series, most of them come with either a sharp or blunt blade which are easily interchangeable via a threaded tang and a hollow tubular nut that fits flush into the pommel. You can easily replace a damaged blade via a hex key, or buy a sharp and blunt blade for the best of both worlds. The nice thing about these swords, the blunt and sharp blades are carefully balanced and weigh the same for practice and cutting.
Specifications.
Oakeshott Type: XVIIIa
OAL: 47-1/4inches
Blade Length: 35-1/4 inches
Blade Width @ Base: 2-1/8 inches
Blade Width 3-1/2 inches from point: 3/4 inch
Blade thickness at base: .254 inches
Blade thickness 2 inches from tip: .090
Distal taper is convex
Hilt OAL: 12 inches
Pommel Type: T-1
Guard Type: 2
Sword Family: n/a
COG: 3-1/2 inches from Base of blade
COP: 21-1/2 inches from base of blade
Weight: 2lb.15oz.
Steel: 5160 Spring SteelThis sword is very light and fast for its size. This is the sharp version, and it came very sharp from the factory.
Overall, this is one fantastic longsword. The balance feels just right, making this one super quick sword to use. There is a misconception out there that longswords are big heavy brutish things that require a lot of strength to use. 5 seconds with this sword in your hands would dissuade anyone of that mistaken concept.
That is a beauty. No one would mistake this sword for a slashing weapon.
Yup they are fast, the weight is only one factor, important for speed is also the COG, the closer to the guard the faster the sword and that's where the pommel comes in.
-
A few more videos.
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
Japanese Katana VS European Longsword - Samurai sword VS Knight Broadsword
Japanese Katana VS European Longsword - Samurai sword VS Knight Broadsword.samurai katana tachi broad long sword tameshigiri war warrior knight load swordsma...
YouTube (www.youtube.com)
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
Eleventh installment - Musashi Tomoe Katana.
A few links.
http://en.wikipedia.org/wiki/Katana
http://www.japanesejujitsu.org/a-brief-history-of-the-katana/
Musashi produces some very nice Katanas for dirt cheap. There is a saying that you get what you pay for, but for the price, a Musashi Katana is a very big steal in the Asian sword market. Mind you, plenty of martial artist firmly believe that you need a $1000+ sword to use it, and I don't doubt them to a point. However, for around $100 dollars, you can't go wrong with a Musashi, especially if you are a sword collector and want something sharp and somewhat authentic...as in, you can actually use it for its intended purpose.
Detailed Description
- Hand forged carbon steel blade with bo-hi
- Hand sharpened
- Beautiful hamon
- Black iron Tomoe tsuba
- Black brass dragon fuchi and kashira
- Cotton and rayskin wrapped tsuka
- Black laquered wood saya
- Fully functional
- Comes with sword bag
Measurements:
Blade: 27 1/2"
Tsuka: 11"
Overall: 39 1/2"
Weight: 2 LbsWhat originally drew me to buying a Musashi Katana were all the positive online reviews of the sword, and its manufacturer. The word was this is one of the best Katanas at any price point for the beginning practitioner. There were several favourable comparisons to swords that cost 3X as much. Seeing that I didn't want to spend a fortune on a functional wall hanger, I got one to see what all the fuss was about.
I will state that this sword is seriously sharp, as in can cut a piece of paper floating down on the blade sharp. This sword also features a real hamon. Many cheap swords have them etched for show. Not this one. The handle is also traditionally constructed with real ray skin, wooden pegs, etc. A very nice Katana for an unbelievable price.
-
Twelfth Installment - Maxam Katana / Ninja Sword.
If the above Katana is of a more traditional sword in both shape, form, and construction, this one is purely tactical mall ninja stuff. With that said, for a very cheap sword, it comes fully sharpened from the factory, is very sturdy with the full one piece tang construction, and is somewhat more than a cheap wall hanger in some key points.
Very cheap wall hangers are very poorly built, and quite often, may come apart whilst swinging them. In other words, very cheap poorly constructed wall hangers are a danger to everyone in use. This cheap katana style sword is robustly built and dare I say it, can be used.
The menuki is just glued ontop of the cord wrap. I must say, it is very well glued as I have tried to move it. Possibly pined through the handle but I strongly suspect I would damage the handle to see its inner construction...so I won't. The handle is also oddly shaped as it is just cord wrapped around the metal. There is no play in the wrapping...which is a good thing.
[
](http://s145.photobucket.com/user/Chako_photo/media/Chako_photo001/IMG_4104small_zps35b16ae9.jpg.html)This sword does not feature a traditional buttcap, but has this somewhat frightening end that can be used to good effect in combat.
The scabbard or saya is not badly made for what it is. I have seen worse. :ahhh
So as far as a sword goes, this one is strictly in the realms of mall ninjas and zombie hunters.
-
@Chako said:
Eight installment - CAS/Hanwei Mercenary Sword.A little longsword history to start things off.
http://en.wikipedia.org/wiki/Longsword
This sword is a beast that come in at 4lb 8 ounces. The Mercenary is an imposing sword in the 15th century style. This sword comes with a triple-fullered blade, steel S-curve guard and scent stopper pommel. Supplied with a leather-covered belt scabbard around a wood frame.
Statistics.
Forged High-Carbon Blade
Weight: 4lb 8oz
overall Length: 47 1/4'' Blade: 35 1/8''
P.O.B.: 4''
Thickness: 5.6 mm - 4.7 mm
Width: 51.8 mm
Grip Length: 8 3/4''
Pommel: PeenedThis sword is longer than my 4 foot table.
A big two handed sword with not very sharp edges...mostly designed to stab into weak spots in armor, or to bludgeon armored foes into insensibility.
this is my favorite so far.
keep em coming
-
Thirteenth installment - Hanwei Military Dadao.
WARNING: First link has some gruesome beheading photos.
http://chinesemartialstudies.com/2012/11/26/693/
http://www.chineselongsword.com/dadao.shtml
There is even a song called The Dadao March that was based around this weapon.
http://en.wikipedia.org/wiki/Dadao_March
Blade Steel: Specially Heat Treated High Carbon Steel
Blade Length: 23" (58 cm.)
Sword Length: 37 1/4" (94 cm.)
Scabbard Length: 23 1/4" (60 cm.)
Sword Weight: 2 3/4 lb. (1.24 kg.)
Decoration/Materials: Steel fittings with leather wrapped grip and scabbard.
Each blade is individually hand forged so lengths & weights may vary slightly.Hanwei saw fit to include a nice leather sheath for protection which is a nice touch. A heavy tough and cheap chopping weapon designed to be effective in mostly untrained hands. The Dadao was based on peasant weaponry and saw action against Japanese troops armed with Katanas. On the battlefield, it was found to be effective against such weapons as its heavy bulk could break opposing blades.
-
Fourteenth installment - Cold Steel 1917 Cutlass.
Specifications:
Blade Length: 25"
Overall Length: 29 5/8"
Steel: 1055 Carbon
Weight: 33.7 oz
Handle: 4 5/8" Hardwood
Scabbard: Leather Scabbard w/ Brass and Copper Fittingshttp://en.wikipedia.org/wiki/Cutlass
http://www.history.navy.mil/library/online/uniform_sword.htm
And of course, the usual Cold Steel video. ::)
1917 Cutlass | Cold Steel Swords
http://www.thepirateslair.com/9-m1917-us-navy-naval-cutlass.htmlTaken from the Cold Steel site.
"In 1917, the U.S. Navy decided to replace its Model 1860 cutlass which had been in continuous service for 57 years, with a new model. Cold Steel's® modern recreation of this classic fighting sword is as authentic as possible, it is virtually an exact copy of an original in the personal collection of Cold Steel President, Lynn C. Thompson. Our 1917 Cutlass features the signature 25" curved blade and a half basket guard that’s stamped out of heavy 18-gauge high carbon steel, and both the blade and guard are blued to resist rusting. The handle is made from carefully shaped hardwood, painted brown and secured to the tang by three heavy brass cutler's rivets.
The scabbard is an accurate reproduction of the original and is made of high quality leather and features brass and copper fixtures. It can be worn comfortably at the side on a pistol belt without chafing its owner."This cutlass is a sturdy piece of kit. It came factory sharp and with all the brass hardware, it sure is a beautiful sword. Mind you, like every Cold Steel sword out there, they are not exact replicas, but modern interpretations of what it should look like in the eyes of the Cold Steel owner. Cold Steel's main focus is to make modern interpretations of old gear for use...but nobody uses swords anymore. I bet Cold Steel arms plenty of mall ninjas the world over. With that said, they do make sturdy functional umm...battle ready swords.
-
Fifteenth installment - Hanwei Taza Rapier and Main Gauche.
SPECIFICATIONS
Overall: 46 1/4“
Blade Length: 38 1/4“
Weight: 2lb 1oz
Point of Balance: 5"
Point of Harmonics: 20"
Width at Guard: .75"
Width at Tip: .40"
Thickness at Guard: .25"
Thickness at Tip: .10"The Taza Rapier is of the 17th century Spanish Cup Hilt form and is absolutely stunning and functional. There is also a matching main gauche or left hand dagger with a sail/triangular guard. This is a very well made sword and dagger set.
-
Sixteenth and last installment -Valiant Armory Signature Series Castile Arming Sword.
http://www.strongblade.com/history/medievalswords.html
http://historywarsweapons.com/medieval-weapons-arming-sword/
Specifications:
Steel: 1060 Carbon Steel
Type: Oakeshott X
Weight: 3 lbs 4 ounces
Overall Length: 39 inches
Blade Length: 32 inches
Grip Length: 4 ½ inches
Cross Guard: 6 ½ inches across
Blade Width: 2 inches at cross -- 1 ½ inched just before point
Distal Taper: maybe 1/16th (about 3/16 thick at cross to 2/16 or 1/8 near point)
Point of Balance: 6 inches from the cross
Center of Percussion: from 19 to 22 ½ inchesThe Valient Armory Castile is a 13th Century arming sword. The Signature edition means that it comes with a top notch scabbard and belt.
Well that concludes the swords in my collection. I hope you guys enjoyed the photographs and history that was included with each addition. :salute:
-
Awesome Chako!
Any plans on which sword is going to be the next to join the family? -
Last installment. >:(
-
Looks like nobody else wants to contribute. I only have so many swords. As for my next...no clue.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login























































