SAK... Why???
-
S30V has been around for several years. Just because Chris Reeves used it does not make it the best for everything.
There are a lot fancier steels around nowadays. Have a look in BF for the latest trends in knife steels.
However the best depends on what you need it for, how easy it is to sharpen, you have to factor in toughness as well as hardness.
Have a look here: http://zknives.com/knives/steels/steelchart.php
-
Good point,but isn't only on the Surges you can find S30V blades?
Do any of the other MT mani factors offer exotic steels?
-
Good point,but isn't only on the Surges you can find S30V blades?
Do any of the other MT mani factors offer exotic steels?
My Charge has it as well as some of the Juice line.
Are you sure there was a juice fancy blade? The only s30v blade I know of leatherman does is on the Charge TTi. The ALX has a CPM 154, and ever other blade on every other tool is 420hc as far as i know.
SAK 440C beats LM 420 any day.
-
@kirk13 said:
Good point,but isn't only on the Surges you can find S30V blades?Do any of the other MT mani factors offer exotic steels?
What? I didnt know you can get it on the Surge! Is it an upgrade option somewhere?
@Dale said:
Very true, but S30V is THE top rated steel available these days.What about s110v, k390, cts-204p, etc? There are alot of "super" steels out there that are better than s30v nowadays! IMO.
-
Good point,but isn't only on the Surges you can find S30V blades?
Do any of the other MT mani factors offer exotic steels?
What? I didnt know you can get it on the Surge! Is it an upgrade option somewhere?
@Dale said:
Very true, but S30V is THE top rated steel available these days.What about s110v, k390, cts-204p, etc? There are alot of "super" steels out there that are better than s30v nowadays! IMO.
+1
-
As to the Juice. Not certain, A friend in another forum stated his Juice had S30V. Researching I cannot find any info that states it does...
-
@Dale said:
As to the Juice. Not certain, A friend in another forum stated his Juice had S30V. Researching I cannot find any info that states it does...No such thing in a stock model. So if that friend isn't called Metro or Evil510 I highly doubt it. ;) Do you have a link to that post/picture maybe.
-
As to the Juice. Not certain, A friend in another forum stated his Juice had S30V. Researching I cannot find any info that states it does...
No such thing in a stock model. So if that friend isn't called Metro or Evil510 I highly doubt it. ;) Do you have a link to that post/picture maybe.
RACER
I’m surprised to hear that
I’m surprised to hear that too. My Juice Xe6 has S30V and the steel on the Vics appears to be at least as hard. But I haven’t really put any of my new Vics to a serious test. Whatever it is, it appears hard enough to already be getting some serious use out of my Tinker’s Philips screwdriver. I’ve already used it on screws that would’ve given grief to cheap Chinese screwdrivers made of softer steel.Is there an easy way to test the steel without risking damage to it?
-
That's a stock Juice. No way is it S30V. Let me log in there. ;)
-
I looked & looked. The only one I can find for sure is the CHARGE TTI. That & I own one.
-
The juice tools and blades are for surw 420.
-
True.

To quote myself from BLF.
I'm surprised to hear that too. My Juice Xe6 has S30V and the steel on the Vics appears to be at least as hard. But I haven't really put any of my new Vics to a serious test. Whatever it is, it appears hard enough to already be getting some serious use out of my Tinker's Philips screwdriver. I've already used it on screws that would've given grief to cheap Chinese screwdrivers made of softer steel.
Is there an easy way to test the steel without risking damage to it?
Where do you get that info from? I have quite a few Juices and none of them has an S30V blade. Only the Leatherman Charges come with those. You can buy Leatherman S30V blades off of TTC on eBay for Waves/Charges but all the other stock Leathermans come with a 420HC blade as far as I know.
As for Victorinox, they use:
x55CrMo14 for blades
x39Cr13 for parts
x20Cr13 for backspringsVic steel is hardened at 1040°C and then quenched at 160°C so the blades get a RC hardness of RC 56. (RC = Rockwell C, unit for hardness)
The saws, scissors and nail files are hardened to RC 53, screwdrivers, can openers and awls to RC 52 and the corkscrews and backsprings to RC 49.
The metal saw is work hardened and hard chromed to achieve a hardness that can cut iron and steel.
I copy/pasted a few of my replies from a recent thread here. >:D
-
As far as the Penknife + venue goes. SAK has & always will have that venue on lock. In the multi-tool arena ? I'm not convinced. Not taking anything away from them. The Spirit X is a beautiful tool. Maybe my expectations are too high, Maybe I got used to the Leatherman I've carried all these years. Ease of access is a HUGE thing to me. Especially one handed access. Hanging off the back of log trailer in high winds... Letting go with both hands isn't possible. But who knows? I've recently discovered SAK... Maybe my perception will change.
-
Got this yesterday... LowTech graciously donated it to further my budding SAK interests...
I was surprised how quickly it took an edge.

I really like this one... It seems like a perfect carry size.
-
@Dale said:
Got this yesterday... LowTech graciously donated it to further my budding SAK interests...I was surprised how quickly it took an edge.

I really like this one... It seems like a perfect carry size.
What Model is it.
the victorinox scissors is something special.
I carry a sak because they are so light and handy.
A leathermans best friend is a good sak.
its one of those tools that grow on you the more you use one.
I have used both Wenger and Victorinox Knives HARD I've never broke one.
-
Got this yesterday... LowTech graciously donated it to further my budding SAK interests...
I was surprised how quickly it took an edge.

I really like this one... It seems like a perfect carry size.
What Model is it.
the victorinox scissors is something special.
I carry a sak because they are so light and handy.
A leathermans best friend is a good sak.
its one of those tools that grow on you the more you use one.
I have used both Wenger and Victorinox Knives HARD I've never broke one.
The Spartan
-
They are compact, reliable, super high quality, and the warranty and customer service from Victorinox is unbeatable. I have sent knives in that I have broken tools off by doing stupid things, told them I did it, and they repair or replace it for the $5 shipping cost. The last couple of times they also replaced the scales and shipped the old scales back with the knives. Every warranty issue I have had was my own fault, but they do not seem to care either way. They just fix or replace their product. This is why I own dozens of them.
They are also fairly easy to customize. You can easily change scales within minutes, and if you are a bit more adventurous, you can disassemble them and add tools and layers as you wish. The parts are all rather modular and manufactured to super tight tolerances, so they just fit together.
They really are made to last a lifetime, and then some. I have a Victorinox SAK from the 1960s that is still tight as a drum and it looks nearly brand new.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


