Thin Multitool Suggestions
-
pleeeease people
"there's nothing Wrong with the Wingman !"
granted it's not 'top end' but if you're just starting your addiction Maliahk, either the 'wingy' or sidekick might not be a bad place to start
where are you from and what sort of prices are they in your 'hood' ? if price isn't much of an issue (ie you live in the USA ::)) try a Wave :D NOT the cheapest nor as thin maybe but you won't regret buying it I don't think !
you can always buy another tool later ;) -
Juice s2 =
compact and covers most your needs 

-
I'll say the Wingman is a very good multi for what you pay but also for the compliment of tools on the tool. You get a 25 year warranty and springy pliers to boot. That being said the Sideclip is a great slim tool BUT being retired and the high cost this may not be the way to go.
My suggestions;
SOG PPP or Deluxe PPP
Great needle nose pliers and the compound leverage is fab.
Nice compliment of basic tools on board
the Deluxe has the 1/4 in driver
you can buy parts to customizeLeatherman PST 2
Great slim tool
has scissors
nice selection of on board toolsLeatherman Wingman
Comes with pocket clip
scissors
good basic selection of tools on board
spring loaded pliers
inexpensive
outside accessible knife OHO ( one hand opening )The Leatherman Juice line is pretty great the outside tools are 2 hand opening and the little driver could come up a bit short YMMV. My Juice S2 fits in my coin pocket and the colors to me a quite lovely. I know for me having OHO tools make a multi even handier than it already is. Having to open the tool to access a blade or file to me gets old. I use a Surge for work and love my wave but again YMMV on the OHO tools.
-
As much as I like the Wingman/Sidekick for what they are, I would tend to agree that if the funds are there, you can do better, when looking for small, light, comfortable pocket carry.
This is going to be particularly true if your requirement of wire cutters is high. The Wingman and Sidekick have the same plier head, which has 'anvil' wire cutters. That's probably great for long term durability since even if they get nicked, they won't bind up, but it also means they're sub-par in cutting ability. If that's important, that's a consideration.
While I like a lot about the Rebar, it's a little thicker than the Wingman (minus the Wingman's pocket clip). I don't know if you want, need, or care about a pocket clip, but the Rebar has none, and no standard option for one, where both the Wingman and Sidekick come with them out of the package.
-
My manners
Welcome to MTo 
Great addition Lynn, I was also thinking while thin is good but what about weight? Depending on where in the world you are many of these suggested tools can be had for a good price at auction sites. We also have a section where members are selling tools so have a look thru there as well.
Whatever MT you decide upon just know that most here also pair theirs with a SAK when the compliment of tools on the MT is lacking. Scissors for example on a 91mm are very good, heck even my 58mm Minichamp scissors are very good. The SAK is you decide will fit nicely in the coin pocket of jeans.
-
I don't have a wing man but I think about picking one up as beater. I should have when my cousin did 18$ the one day. What's attractive about it to me is outside tools and a built on pocket clip. I don't know why Leatherman doesn't do pocket clips more often i wish they would though. I want a bolt on one for the Surge.
-
i'd love a sideclip-type slim tool with just the bit drivers, MAYBE a can opener or awl. perhaps the eyeglass screwdriver-holder could have a few different-sized jeweler's bits, and maybe one of those lil bitty things you buy to pry open an iphone, and then the regular driver could of course use the bit-card bits. no knife blade would be inconvenient but most of my friends edc at least a small pocketknife of some kind and that would make it legal for uk carry. a light-duty pair of pliers and i'd have a perfect multi for dress-up days when i don't want a heavy pocket.
oh, and the pliers smooth on the inside, like jeweler's pliers. i realize a jeweler's multi-tool isn't really in demand, but there are more than a few times i have been asked to fix jewelry on the go, and i have taped up regular pliers as a precaution to not scratch a nice finish because i didn't have my little smooth pliers on me.
-
Wow!
I love coming back here each time and having more great suggestions. :D
To answer some questions. I live in the US. My budget is anything under $75.
I kind of want a new tool...so that pretty much eliminates retiried tools. Unless there's a place I can get them new.So....now I think I'm needing some thing with
OHO features (with the main tools, blade, pliers?)
A locking blade ( Quick question...this means in the open position, right?)
A spring loaded pliers (not necessary)I keep coming back to the skeletool...it just seems mostly what i'm looking for. Except that the needlenose pliers don't look too needlenose...a little flat.
Anyways the juice s2 and sidekick also seem like good options, but a couple have suggested to look elsewhere if I need good wire cutters.I noticed the skeletool has a deal that comes with a style cs.
All in all, I just need to buy one and try it out.
As long as I can use it for something other than a paperweight I';ll be happy. :)
-
I'm not a fan of the pliers on the Skeletool myself, but if they would work for the most part to cover your needs, and the other tools on it are what you need, you perhaps should give it a try. Trust me, you'll end up with more than one before it's all said and done and you figure out what works best for you ;)
-
This may be of use to you:

Rebar, Spirit, Wave/Blast/Fuse/Kick/Charge, Squirt, Sidekick/Wingman, Skeletool.
The Skeletool pliers are around about the same dimensions as the Juice from this angle, but are actually something like 50% thicker and the pivot is bigger. The Sideclip (not pictured) is a little bit thicker again than the Skeletool but with a slightly smaller pivot and pliers that go down to more of a point.
-
Great plier comparison Cupboard

-
I have to say that while I'm not a major fan of the Skelitool,it beats the carp out of the Sidekick/Wingman on quality,and thinner more pocketable dimensions.
If you can get the set with the Style CS,it has a pretty good set of scissors

-
The Skeletool is very good as a knife and screwdriver, in my experience, but as a pair of pliers it has "love it or hate it" ergonomics with its curved handles.
The Skeletool is also much more expensive than a Wingman. If I were you, I'd buy the Wingman. It gives you more tools for less money (adds scissors, file, and can opener compared to the Skeletool). Scissors especially are useful on a daily basis for most people, once they start carrying a tool with them.
-
@Maliahk said:
OHO features (with the main tools, blade, pliers?)
A locking blade ( Quick question...this means in the open position, right?)
A spring loaded pliers (not necessary)I keep coming back to the skeletool...it just seems mostly what i'm looking for. Except that the needlenose pliers don't look too needlenose...a little flat.
Anyways the juice s2 and sidekick also seem like good options, but a couple have suggested to look elsewhere if I need good wire cutters.I noticed the skeletool has a deal that comes with a style cs.
All in all, I just need to buy one and try it out.
As long as I can use it for something other than a paperweight I';ll be happy. :)
I don't have a Skeletool myself, but it is on the short list of new MT's that I want. I personally prefer pliers that are not so needle nose, as they tend to get in the way when trying to come on to a bolt in a tighter space.
The Skeletool and Style CS pack is a good deal IMHO. I really like the Style CS, and think they are great scissors. Actually, probably the ONLY scissors that I like from Leatherman. I think most Leatherman scissors that are in MT's are crap.
I had an S2 and a CS4, and traded them for a TTi. While on paper they are fantastic tools, in person they really fall short. The fit and finish is just too poor for me, and the drivers will bite you every time you go to open them.
Honestly, I also think that getting used tools is the way to go. You might be able to get something that you want that new, would be out of your price range. Also remember that Leatherman has a 25 year warranty, Gerber lifetime, and Victorinox lifetime as well.
Probably my favorite MT is my SwissTool that I bought used on ebay for $60 to my door. It was near mint, and would have cost me much more to buy new, and the new really wouldn't have gotten me any better quality.
Good luck with your search, and just remember, the MTO way is to just buy EVERYTHING!! :D
-
^^^And then a second copy of everything, just in case..... :D
-
If scissors are really important to you, I'd have a look at Lynn's scissors review thread. It's pretty comprehensive and well balanced.
-
Link to the scissor thread for your convenience.
</topic/36798 -
I love coming back here each time and having more great suggestions. :D
To answer some questions. I live in the US. My budget is anything under $75.
I kind of want a new tool...so that pretty much eliminates retiried tools. Unless there's a place I can get them new.So....now I think I'm needing some thing with
OHO features (with the main tools, blade, pliers?)
**There are models with 4 OHO outside opening tools and all locking. Surge, Wave, Charge for ex **A locking blade ( Quick question...this means in the open position, right?)
Yes, LM uses liner locks.A spring loaded pliers (not necessary)
There arent many models with spring loaded pliers. Wingman, Sidekick, OHT come to mind.I keep coming back to the skeletool...it just seems mostly what i'm looking for. Except that the needlenose pliers don't look too needlenose...a little flat.
The Skeletool is a polarizing tool around here with its love it or hate it appeal. I like it and for a simple tool and the bluntish plier is good. This tool is very pocketable and the carabiner give you another option to carry. The Skele and Style deal is a good one and I agree with DMac the style has pretty sweet scissors as well as a nice littel tool in itself.Anyways the juice s2 and sidekick also seem like good options, but a couple have suggested to look elsewhere if I need good wire cutters.
The S2 is small, its as small as a Victorinox Tinker. I just got one so I cannot respond it's capabilities but it has always gotten great reviews.I noticed the skeletool has a deal that comes with a style cs.
All in all, I just need to buy one and try it out.
YESAs long as I can use it for something other than a paperweight I';ll be happy. :)
-
@Cupboard said:
The Skeletool pliers are around about the same dimensions as the Juice from this angle, but are actually something like 50% thicker and the pivot is bigger. The Sideclip (not pictured) is a little bit thicker again than the Skeletool but with a slightly smaller pivot and pliers that go down to more of a point.Thanks for the comparison. The wave and rebar look like the best pliers for my needs...actually I like the juice s2 as well.
But overall, I think the SKeletool is for me. Thin, light, usable as an everyday carry.
My next tool (yes I'm already looking for another) will be more robust...maybe the wave.
Thanks for an awesome welcome to an awesome forum!!
:D :D

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login