Thin Multitool Suggestions
-
I'm not a fan of the pliers on the Skeletool myself, but if they would work for the most part to cover your needs, and the other tools on it are what you need, you perhaps should give it a try. Trust me, you'll end up with more than one before it's all said and done and you figure out what works best for you ;)
-
This may be of use to you:

Rebar, Spirit, Wave/Blast/Fuse/Kick/Charge, Squirt, Sidekick/Wingman, Skeletool.
The Skeletool pliers are around about the same dimensions as the Juice from this angle, but are actually something like 50% thicker and the pivot is bigger. The Sideclip (not pictured) is a little bit thicker again than the Skeletool but with a slightly smaller pivot and pliers that go down to more of a point.
-
Great plier comparison Cupboard

-
I have to say that while I'm not a major fan of the Skelitool,it beats the carp out of the Sidekick/Wingman on quality,and thinner more pocketable dimensions.
If you can get the set with the Style CS,it has a pretty good set of scissors

-
The Skeletool is very good as a knife and screwdriver, in my experience, but as a pair of pliers it has "love it or hate it" ergonomics with its curved handles.
The Skeletool is also much more expensive than a Wingman. If I were you, I'd buy the Wingman. It gives you more tools for less money (adds scissors, file, and can opener compared to the Skeletool). Scissors especially are useful on a daily basis for most people, once they start carrying a tool with them.
-
@Maliahk said:
OHO features (with the main tools, blade, pliers?)
A locking blade ( Quick question...this means in the open position, right?)
A spring loaded pliers (not necessary)I keep coming back to the skeletool...it just seems mostly what i'm looking for. Except that the needlenose pliers don't look too needlenose...a little flat.
Anyways the juice s2 and sidekick also seem like good options, but a couple have suggested to look elsewhere if I need good wire cutters.I noticed the skeletool has a deal that comes with a style cs.
All in all, I just need to buy one and try it out.
As long as I can use it for something other than a paperweight I';ll be happy. :)
I don't have a Skeletool myself, but it is on the short list of new MT's that I want. I personally prefer pliers that are not so needle nose, as they tend to get in the way when trying to come on to a bolt in a tighter space.
The Skeletool and Style CS pack is a good deal IMHO. I really like the Style CS, and think they are great scissors. Actually, probably the ONLY scissors that I like from Leatherman. I think most Leatherman scissors that are in MT's are crap.
I had an S2 and a CS4, and traded them for a TTi. While on paper they are fantastic tools, in person they really fall short. The fit and finish is just too poor for me, and the drivers will bite you every time you go to open them.
Honestly, I also think that getting used tools is the way to go. You might be able to get something that you want that new, would be out of your price range. Also remember that Leatherman has a 25 year warranty, Gerber lifetime, and Victorinox lifetime as well.
Probably my favorite MT is my SwissTool that I bought used on ebay for $60 to my door. It was near mint, and would have cost me much more to buy new, and the new really wouldn't have gotten me any better quality.
Good luck with your search, and just remember, the MTO way is to just buy EVERYTHING!! :D
-
^^^And then a second copy of everything, just in case..... :D
-
If scissors are really important to you, I'd have a look at Lynn's scissors review thread. It's pretty comprehensive and well balanced.
-
Link to the scissor thread for your convenience.
</topic/36798 -
I love coming back here each time and having more great suggestions. :D
To answer some questions. I live in the US. My budget is anything under $75.
I kind of want a new tool...so that pretty much eliminates retiried tools. Unless there's a place I can get them new.So....now I think I'm needing some thing with
OHO features (with the main tools, blade, pliers?)
**There are models with 4 OHO outside opening tools and all locking. Surge, Wave, Charge for ex **A locking blade ( Quick question...this means in the open position, right?)
Yes, LM uses liner locks.A spring loaded pliers (not necessary)
There arent many models with spring loaded pliers. Wingman, Sidekick, OHT come to mind.I keep coming back to the skeletool...it just seems mostly what i'm looking for. Except that the needlenose pliers don't look too needlenose...a little flat.
The Skeletool is a polarizing tool around here with its love it or hate it appeal. I like it and for a simple tool and the bluntish plier is good. This tool is very pocketable and the carabiner give you another option to carry. The Skele and Style deal is a good one and I agree with DMac the style has pretty sweet scissors as well as a nice littel tool in itself.Anyways the juice s2 and sidekick also seem like good options, but a couple have suggested to look elsewhere if I need good wire cutters.
The S2 is small, its as small as a Victorinox Tinker. I just got one so I cannot respond it's capabilities but it has always gotten great reviews.I noticed the skeletool has a deal that comes with a style cs.
All in all, I just need to buy one and try it out.
YESAs long as I can use it for something other than a paperweight I';ll be happy. :)
-
@Cupboard said:
The Skeletool pliers are around about the same dimensions as the Juice from this angle, but are actually something like 50% thicker and the pivot is bigger. The Sideclip (not pictured) is a little bit thicker again than the Skeletool but with a slightly smaller pivot and pliers that go down to more of a point.Thanks for the comparison. The wave and rebar look like the best pliers for my needs...actually I like the juice s2 as well.
But overall, I think the SKeletool is for me. Thin, light, usable as an everyday carry.
My next tool (yes I'm already looking for another) will be more robust...maybe the wave.
Thanks for an awesome welcome to an awesome forum!!
:D :D

-
Late, but still :)
While it doesn't have the OHO tools, if you like needle noses and locking, the older LM's are worth a look, they have more needle-nosey pliers than the newer ones. For one with locking tools, I think you'll like the Pulse. Also comes with scissors and a diamond file, like the Wave, and is really not so much larger than the PST.
-
My next tool (yes I'm already looking for another) will be more robust...maybe the wave.
In that case, have a look at the new model Surge

New Surge is the bomb!
-
SO I got my Skeletool and Style CS in the mail.
Much heavier than I thought ( the skeletool not the style)
Love the OHO blade.
Couple of questions though...
THe skeletool looks slightly dirty...not overtly, but around the pliers and carbiner. Is this just from the forging process?
Speaking of the pliers, they don't quite close all the way. The tip touches, but the rest of the needlenose section does not...Is this normal?
Also a couple of the plates inserted into the handle look slightly worn/chipped...again is this just from forging processes?
One more thing, the tool is very stiff, will this go away after use?
-
@Maliahk said:
SO I got my Skeletool and Style CS in the mail.Much heavier than I thought ( the skeletool not the style)
Love the OHO blade.
Couple of questions though...
THe skeletool looks slightly dirty...not overtly, but around the pliers and carbiner. Is this just from the forging process?
Speaking of the pliers, they don't quite close all the way. The tip touches, but the rest of the needlenose section does not...Is this normal?
Also a couple of the plates inserted into the handle look slightly worn/chipped...again is this just from forging processes?
One more thing, the tool is very stiff, will this go away after use?
Glad you got your Skeletool, a dirty tool very well could be oils and manufacturing crud not cool they let it go thru but a quick clean up and you should be good to go. I know a new squeaky clean tool is very important to some but you mentioned you would be using it on your auto so clean it like you would after a day working with it and it will be good to go. Chipping and worn parts is not normal I'd send it back personally. The needle nose will touch on the tip and this is the precision part of the plier head and is very normal. A very stiff tool is indeed because it's new so go put that tool to some use.
-
SO I got my Skeletool and Style CS in the mail.
Much heavier than I thought ( the skeletool not the style)
Love the OHO blade.
Couple of questions though...
THe skeletool looks slightly dirty...not overtly, but around the pliers and carbiner. Is this just from the forging process?
Speaking of the pliers, they don't quite close all the way. The tip touches, but the rest of the needlenose section does not...Is this normal?
Also a couple of the plates inserted into the handle look slightly worn/chipped...again is this just from forging processes?
One more thing, the tool is very stiff, will this go away after use?
Glad you got your Skeletool, a dirty tool very well could be oils and manufacturing crud not cool they let it go thru but a quick clean up and you should be good to go. I know a new squeaky clean tool is very important to some but you mentioned you would be using it on your auto so clean it like you would after a day working with it and it will be good to go. Chipping and worn parts is not normal I'd send it back personally. The needle nose will touch on the tip and this is the precision part of the plier head and is very normal. A very stiff tool is indeed because it's new so go put that tool to some use.
Thanks.
I'm going to upload some pics tomorrow to show you what I mean about the wear/chipping to see if it's normal or I'm being too much of a tool hawk (hmmm think I coined a new phrase).
-
Its totally understandable, when you finally get your Leatherman you want it to be everything you expect. Post up some pics for sure.
-
Fatntastic post team - Some very useful information within.
@Lynn LeFey said:
Figured I'd snap some pics for reference
Here are a number of MTs, ordered by thickness left to right, with right being the thickest.
Vic Cadet, Leatherman Style PS, Leatherman Micra, Vic Tinker, Leatherman PST II, Vic Farmer, SOG Pocket Powerplier, Leatherman Juice S2, Vic Spirit X, Vic Climber, Leatherman WingmanGreat photo Lynn - and I'm sure just what Maliahk needed -
Brilliant idea with the coins - But please re-shoot with Aussie 10c pieces
I cannot believe that the Climber is thicker than the Spirit and that the Wingman is the thickest of the lot - Not what I would have expected....
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login