The multitool of the automotive world!
-
I hate when there's not much room to maneuver your nuts! That is a bloody tight fit eh!
-
@derekmac said:
I hate when there's not much room to maneuver your nuts! That is a bloody tight fit eh!
:D
Seriously, yes, it is a huge pain in the butt. I have to wonder if the mechanics that install these kinds of things on a regular basis have some kind of jig they use, because this was a major pain in the arse.
I was very tempted to take the whole bumper off to install it, or just say to heck with it and pay a mechanic to deal with it. :ahhh
Def
-
I would have been tempted to use a small dab of superglue to temporarily attach the washer to the nut, then use a Schrade ST6 (long nose locking plier MT) to firmly hold the nut (and attached washer) exactly where I wanted it. Unless the nut was too far in for the ST6 to reach.
You should always look for an excuse to involve an MT or SAK on any job described on MTo, you should know that

Nice photo how-to BTW. I find it satisfying to work out how to do something myself, especially if it gets a bit fiddly or tricky, because I know not all tradesman will take care to do a thoroughly good job like I try to.
-
@gregozedobe said:
Nice photo how-to BTW.yeah very nice play by play shots!

it was like I was there Grant, stuck under your jeep swearing too! :D
-
@Grant Lamontagne said:
Nice, they even made it doable from factory. Sure is night and day compare to TJ, at least it rides like a car instead of like a tractor with bad suspension.
You say that like it's a bad thing. :D
I really like my TJ. Every time I get behind the wheel of that thing I'm reminded of just how much fun it is to drive, and I can't wait to get it back on the road again. It's nice to have an alternative though, as that suspension can really wear you out on long drives! :ahhh
I thought it was okay too when I bought it, but now that I'm getting older, feeling like I'm driving through Rubicon trail on roads that barely felt in a civic just isn't as appealing anymore. :ahhh
-
Damn, using superglue is a great idea! I'll have to remember that in case I'm ever in an equally crappy situation.
-
@gregozedobe said:
I would have been tempted to use a small dab of superglue to temporarily attach the washer to the nut, then use a Schrade ST6 (long nose locking plier MT) to firmly hold the nut (and attached washer) exactly where I wanted it. Unless the nut was too far in for the ST6 to reach.You should always look for an excuse to involve an MT or SAK on any job described on MTo, you should know that

Nice photo how-to BTW. I find it satisfying to work out how to do something myself, especially if it gets a bit fiddly or tricky, because I know not all tradesman will take care to do a thoroughly good job like I try to.
It was about an inch to an inch and a half in, and there wasn't room for both the washer and the nut to go in at the same time. Once you got in a little ways it opened up a little bit more so you could get the nut on the end of the bolt, but you couldn't put the washer and the nut in at the same time. I'm not sure the ST5 would have made it either, but the superglue combined with my initial wrench idea probably would have worked. Of course, I don't usually keep superglue around as it tends to dry out from one use to the next.
@Grant Lamontagne said:
Nice, they even made it doable from factory. Sure is night and day compare to TJ, at least it rides like a car instead of like a tractor with bad suspension.
You say that like it's a bad thing. :D
I really like my TJ. Every time I get behind the wheel of that thing I'm reminded of just how much fun it is to drive, and I can't wait to get it back on the road again. It's nice to have an alternative though, as that suspension can really wear you out on long drives! :ahhh
I thought it was okay too when I bought it, but now that I'm getting older, feeling like I'm driving through Rubicon trail on roads that barely felt in a civic just isn't as appealing anymore. :ahhh
If you saw the roads in my neighborhood right now you'd be thankful for the rough ride in the Jeep, as your Civic would probably bottom out or worse. This is a picture I took last month, and it's gotten worse since then.

That curb you see in the top right corner is the one surrounding my house. I'll see if I can get a better shot for you later, but you get the idea- a sturdy truck is a much better drive here than a car.
Def
-
Our roads are a bloody disaster right now! I'd hate to think how many people have blown tires and bent rims around here. There are some potholes that would probably make our Jeeps disappear, never to be seen again.
-
Yeah, I know what you mean. My boss' wife blew out and destroyed a rim on their Jag last month, and those rims are worth more than I have paid for many entire cars I have owned. :ahhh
While I'm not exactly scared to take my VW out (I did yesterday) there are some very nasty holes around here and I would much rather deal with them easily in the Jeep than have to swerve around them in the VW. I still try to avoid them in the Jeep, but it's just not as much of a concern in it. This is a large part of why I prefer a solid front axle in a truck. Yes the ride quality may suffer a bit, but every year I see cars and SUV's in intersections with the front end only held off the ground by the front tire being wedged into the fender, and I would really prefer that wasn't me. I just don't trust independent front suspension in that level of punishment, especially in SUV's, which have a lot more mass than a car and hit potholes that much harder. In order to achieve the same strength ratio as a car, an SUV that weighs twice as much has to have a front end that is four times as strong as that of the car, and I really don't believe they are that strong.
People call me paranoid, but you hit holes like that on a fairly regular basis, at certain speeds and I think it's just a matter of time that you lose a wheel.
Def
-
Latest photo of my road. For some reason it is rotated again. Stupid Tapatalk. ...
Def
Sent from a digital multitool

-
Or maybe not.
Here is the completed look of the receiver install.
Def
Sent from a digital multitool

-
And a close up.
Def
Sent from a digital multitool

-
Looks good! I like how it's pretty well hidden, unlike mine that sticks out like a sore thumb!
-
Yeah well it will be a lot more obvious once there's a ball on it.
Def
Sent from a digital multitool
-
People do tend to notice balls on a rear end don't they.

-
Looks that way. If I come from the other way (in the distance in that photo) I can get the VW in the narrow gap between pothole and curb without hitting any. Coming from the direction the photo was taken from there's no chance- I have to take the car through it. Very slowly. Some are deep enough that there's potential to bottom out, even at low speeds.
This is why I like my Jeep. By the time I come across a pothole big enough to affect it, it's probably already been filled in by the wreckage from smaller cars. >:D
Def
-
If I recall, your place is on the left next to the road sign, right?
-
Yes, that's me, although we have moved into the middle unit since you were here. We were in the lower one, but my wife wanted more space so when one was available we moved upstairs.
That means I have to turn up the side street to get home, which means driving through that mess. :ahhh
Def
-
So, figure it'll take them 4 months to fix it, then crumble again after 5 months? :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login