Victorinox 91mm Tools Evolution
-
OK, that clears that up for me,
In the first picture I could see the groove but in the picture that Gareth posted I can. And I also think he is correct about the tip of the awl being imbedded in the black material. Thanks for the explanation Brenner & Gareth. -
Actually I can see now that it is in the cloth. Good spot Gareth.

-
Yep, the tip is in the black cloth, it's not broken. This pic was experiment #4592 in "trying to take a pic of a knife and not have it look like crap". The corkscrew is grooved like the one on the pic above.
-
Don't feel slighted, you take a lot better pictures than I do. :D
-
Too bad I don't even like Phillips drive! Oh well, there is a lot of history that would have been better avoided.
-
I love the Meat Can picture with the Can-Key, but I can't stand to look at it. Have to find a vegetable or fruit tin for examples.
-
Hi
Congratualtions! well done.....
Best
NM -
SAAM's 91 mm Tools Evolution - http://archive.is/DxkPF
This archive page instead of lost victorinox.saam007.com/91mmtools.php
And http://forum.knives.pl/index.php/topic,117768.0.html replace part of the lost victorinoxpage.com
-
@Katran73 said:
SAAM's 91 mm Tools Evolution - http://archive.is/DxkPFThis archive page instead of lost victorinox.saam007.com/91mmtools.php
And http://forum.knives.pl/index.php/topic,117768.0.html replace part of the lost victorinoxpage.com
Hi, Katran73. Welcome back. :waving:
SAAM007s is back up at another address.
-
Hi, enki_ck. Thank you!
But I still continue to remain reader. :) Sorry.
-
Thanks for giving us access to the SAAM site again !
There is also a small change to the fish-scaler after the rules were added: the 7 1/2 mm mark dropped.
Then there is the shuffle of tools on larger Officers as in these photos:

-
@J Mackrel Jones said:
There is also a small change to the fish-scaler after the rules were added: the 7 1/2 mm mark dropped.Good eye! I never noticed that one before. I just checked my collection and can reasonably put a date of 1987 on that change.
@J Mackrel Jones said:
Then there is the shuffle of tools on larger Officers as in these photos:Yeah, you see that one a lot. Moving the scissors to the layer next to the openers instead of being next to the blades happens at almost the exact same time as the bail-to-keyring change and the scissors go from the old style gapless to the newer style with the large gap, dating this to about 1969-1970. The is some overlap of styles, but these are seen in < 10% of the Champions out there. Tool-wise, the LNF on the back of the knife gets it's nail-nick moved, so I guess that counts as a tool change.
-
Jazzbass, you must have a nail-nickless LNF (or two?) in your collection but I have never seen one - even on a post-2004 european Traveller. Maybe yours is a factory error - QC slip ?
How is such an nailfile opened?
Wish the back-side Long Nail File was still on the Officers that don't have a front-side metal saw/file. Would trade the parcel hook for it any day. -
@J Mackrel Jones said:
Jazzbass, you must have a nail-nickless LNF (or two?) in your collection but I have never seen one - even on a post-2004 european Traveller. Maybe yours is a factory error - QC slip ?
How is such an nailfile opened?
Wish the back-side Long Nail File was still on the Officers that don't have a front-side metal saw/file. Would trade the parcel hook for it any day.I probably didn't word my last post as well as I should have. In the Champions you show above, the location of the nail-nick is changed, not removed all together. In the pre-1970 models the nail-nick on the LNF faced the back (corkscrew) side of the knife. This is because of the design of the backsprings of the adjacent layers. When the scissors/LNF layer was moved to the front of the knife beside the opener layers, the nail nick was moved to the front-side of the LNF. A pre-1970 LNF couldn't be used on a post-1970 model because of this.
BTW, this applies to 91mm LNFs only. 84mm models evolve in the opposite way - they face the front side of the knife initially (1940s) and then are changed to face the back side of the knife in the 1950s and stay there until phased out.
-
This thread was started about a decade ago (on October 17, 2009) to announce and support the creation of SAAM's 91mm Tools Evolution site. As can be seen above, the thread was active for about two weeks in October 2009 and then for three more days in March 2014. So why wake it up now? First, to celebrate the 10th birthday of SAAM's 91mm Tools Evolution site. Second, to try to find out if SAAM's site is essentially a static document that will never be modified, or that there is still a possibility for it to get improved. Is there? Anyone knows?
In order to make things a bit less theoretical, I'm hereby providing the thing that is most notably missing from SAAM's site: an image of the backside Phillips screwdriver variations. Some of the posts above suggest that ICanFixThat was supposed to provide such an image about a decade ago. Better late than never?
The first attached image is this "missing piece." It was designed to be embedded in the corresponding SAAM's page instead of the current "na.jpg" place holder. The second attached image shows the result of this embedding. Anyone can make such a local version of SAAM's page by doing the following (I used a Windows PC, but it should similarly work on other operating systems):
[list type=decimal]-
Make a local copy of SAAM's 91mm Tools Evolution page by choosing "Save Page As" from your web browser's menu with the "Web page, complete" file type option. This should result in an HTML file called "SAAM's - 91mm Tools Evolution.htm" (or "SAAM's - 91mm Tools Evolution.html") and a folder called "SAAM's - 91mm Tools Evolution_files" in the same location.
-
Save a local copy of the first attached image below, make sure that the image file is called "phillips.jpg" and move it to the "SAAM's - 91mm Tools Evolution_files" folder that got created in the previous step.
-
Open the HTML file that got created in the first step with a text editor (such as Notepad). Search and replace "na.jpg" by "phillips.jpg" and then save the modified file.
If you now view your modified HTML file with a web browser, it should look like the second attached image below. A similar operation should also work for an online version of the page if you happen to have access to the site or to a mirror of it (but note that, legally, you may need appropriate permission to make such a publicly available modification).
Some (but not all) of the tool images on SAAM's page are also links to higher resolution versions of the corresponding images. The third attached image below is such a higher resolution version and can be used in this way.
Note that as the creator of both the first attached image and the third attached image below, I am hereby granting everyone the permission to do whatever they want with these two images. This includes, but is not limited to, embedding them in any publicly or privately available version of SAAM's 91mm Tools Evolution site.
A final remark: Note that I'm not taking a position on whether or not distinguishing just 5 different variants of the backside Phillips screwdriver is the right thing to do. As already pointed out in this thread a decade ago (see above), by taking into account more subtle differences, more variants can be identified. The fact is that SAAM's page currently distinguishes 5 variants and the provided image thus shows what I believe to be suitable samples of these variants.



-
-
That would be super cool. That site is bookmarked on my IPad and IPhone. I use it pretty often.

-

@MiniChamp said:
So why wake it up now? First, to celebrate the 10th birthday of SAAM's 91mm Tools Evolution site. Second, to try to find out if SAAM's site is essentially a static document that will never be modified, or that there is still a possibility for it to get improved. Is there? Anyone knows?So...?
Anyone knows anything? 
What about this thread?
Should it go to sleep for another five years now?
Is it a good place to discuss Victorinox 91mm Tools Evolution?
How about using it for pointing out problems in SAAM's 91mm Tools Evolution site? This way it may serve as an auxiliary source of information related to the site. Opinions? 
-
Nice work MC.
I know one of our current members knows 'Mr. SAAMS' and contacted him in the last year or so to see if he was going to update the site/page - I cannot remember in which thread this was discusssed

Apparently he was not planning to do so - As he has moved onto other things
Although I know that some dates were added to that Phillips section in the last couple of years as there used to be more ? ? ? ? entries.
Updating this thread or the Work in the Wiki thread would be good for discussions/updates
Should we add this thread to the SAK identification sticky post - I reckon so -
Thanks!

Updating this thread or the Work in the Wiki thread would be good for discussions/updates
Should we add this thread to the SAK identification sticky post - I reckon soGood point about the sticky post. Without such an appropriate link, this thread wouldn't be a good place to discuss SAK evolution.
Anyway, I'd like to point out what I consider to be the most significant "bug" in the current version of SAAM's 91mm Tools Evolution site. It's the year listed for the transition from a 5-loops fluted corkscrew to a 4-loops fluted corkscrew. As is well known, this is one of the many changes that occurred around 1973, but SAAM's site lists it as occurring in 1983. I've seen quite a few MTO posts where this error seems to confuse people. I suspect that it's essentially a typo.
-
@MiniChamp said:
Thanks!
Good point about the sticky post. Without such an appropriate link, this thread wouldn't be a good place to discuss SAK evolution.Anyway, I'd like to point out what I consider to be the most significant "bug" in the current version of SAAM's 91mm Tools Evolution site. It's the year listed for the transition from a 5-loops fluted corkscrew to a 4-loops fluted corkscrew. As is well known, this is one of the many changes that occurred around 1973, but SAAM's site lists it as occurring in 1983. I've seen quite a few MTO posts where this error seems to confuse people. I suspect that it's essentially a typo.
Good news
I've asked SAAM again about "corckscrew bug" and he found ability to fix it. Now I can recommend his site to new SAK collectors without saying every time "it's good for dating but 4 loop corcscrew started in 1973" 

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login