What Did You Use Your Multitool For Today?
-
Used the MP600 Pro Scout to remove a small piece of my plastic iPhone case that had broken. Knife to cut the piece away. File to clean up the corners so it wouldn't snag on my pocket.
-
I used my SAK and toolkit to remove a rusted out mailbox from my house and then move one screw over to accomodate the new box.
-
Not a use that gets reported here often, I'm sure...
I pulled a bra out of the laundry, and one of the hooks was bent. So I grabbed the nearest MT, which happened to be a SOG PPP, and bent the hook back into place. The very fine needle nose of the Pocket Powerplier worked great for such precision work.
Also... JAfromMn... Ouch. Crap. That sucks. :'(
-
Gave my new BO MP600 Bluntnose a bit of a workout today.
Pliers to tighten up parts on my snowblower before cleaning out the driveway.
Screwdriver to adjust the blade setting on my circular saw so I could cut some material for shelves.
Serrated knife to cut a new mat for the front entryway and to cut plastic edging for the shelves.
File to clean up the edges on the shelf edging and fit it flush to the shelf edge.
Can opener to jimmy open the lid on a "non-reusable" soap container so that it could be refilled. (With a bit of ingenuity and some tools, nothing is "un" or "non" anything :D).
Plain knife to trim the plastic tabs that made the soap container lid so difficult to remove (It now pops of with a simple twist).
Not a bad day for a tool that's less than 48hrs out of the package
. -
The other day at work I forgot my tape measure so I used my LM Blast to measure out for toe board on a few small scaffolds.
It worked out very well. -
Yesterday I bought an entertainment center at GoodWill for $9.99. it was about 1" to big to go into the back of my Small SUV, I used my Charge TTi to take it appart in the parking lot

-
@Toolslinger said:
Can opener to jimmy open the lid on a "non-reusable" soap container so that it could be refilled. (With a bit of ingenuity and some tools, nothing is "un" or "non" anything :D).One for the quotes file!

-
Last night I used my Rebar to remove a built in cook top at my moms house, I was gonna use it to put the new one in but it didnt happen that way. Ever heard measure twice, im guessing that never happened since the new one was completely the wrong size. So I used my rebar to reinstall the old cook top while waiting on a new one.
Sent from my SCH-I605 using Tapatalk
-
Used a Kick clip, Rebar and Crunch to modify and reassmble a Blast.
Also used the Kick clip to reassemble the inner tools on a Rebar.
-
Used the serrated blade on my BO MP600 to open the package with my new SS MP600 in it.

-
I used the main blade on the Vic Rescue Tool to open boxes today at the shop.
-
Scissors on the Urban Scout to trim loose threads on the kid's clothes.
File to clean up a busted finger nail.
Light day ::) -
My son used my Sidekick to clip guitar strings that he replaced today.
-
To show some idiot at the fleamarket that LM is still producing the Wave and many other models and they are not worth the high dollar amount he was asking

Jeez some people are really kidding themselves both at the fleamarket and fleabay with the prices they are wanting. I bring several LMs with me when I go so I can show these smurfholes these tools are common and not some unicorn horn scaled tools. This one guy slowed his roll and asked a bunch of questions and came down a bit but was still higher than amazone. These same guy rarely sale their wares and I see them over and over again. I like to bother them from time to time just to bust their balls.
-
I used the pliers on my wave to hold a razor head since I forgot the handles and dryshaved with said wave. My face burns :ahhh need to get a fresh razor later.
-
Used my mp600 to cut a bunch of coax, unscrew a few wall plates, change coax splitters and strip some ground wire. Then I used the tweezers and straight pin from my champ plus to pull the biggest splinter I've ever had out of my thumb. Ouch. I swear it was 1/4" long and it slid directly under the skin of my cuticle. Fun.
-
MP600 Urban Scout on duty today.
Scissors to trim tags and labels from new clothes.
Philips driver to undo screws on a panel hiding a water line.
Pliers to adjust valve on said water line as there was no knob.
Knife to open mail packet containing new Gerber BO Diesel (to be used in a mod tonight :D). -
MP600 getting work done:
Screwdriver with adapter and newly acquired Pocketwrench II to adjust the height setting on the baby's crib.
Knife to cut threads and salvage some velcro for a sheath mod.
Flat driver to tighten a knob on a water valve.
Pliers to entertain myself while waiting for dinner to cook.
-
I've been using my new BO PST for fiddling purposes this morning in an attempt to loosen it up some. I think it's working...
-
SwissTool Spirit X was used to install a paper towel dispenser today at the shop :D
Sent from Terry's Texting Tool



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login