What Did You Use Your Multitool For Today?
-
Used a Kick clip, Rebar and Crunch to modify and reassmble a Blast.
Also used the Kick clip to reassemble the inner tools on a Rebar.
-
Used the serrated blade on my BO MP600 to open the package with my new SS MP600 in it.

-
I used the main blade on the Vic Rescue Tool to open boxes today at the shop.
-
Scissors on the Urban Scout to trim loose threads on the kid's clothes.
File to clean up a busted finger nail.
Light day ::) -
My son used my Sidekick to clip guitar strings that he replaced today.
-
To show some idiot at the fleamarket that LM is still producing the Wave and many other models and they are not worth the high dollar amount he was asking

Jeez some people are really kidding themselves both at the fleamarket and fleabay with the prices they are wanting. I bring several LMs with me when I go so I can show these smurfholes these tools are common and not some unicorn horn scaled tools. This one guy slowed his roll and asked a bunch of questions and came down a bit but was still higher than amazone. These same guy rarely sale their wares and I see them over and over again. I like to bother them from time to time just to bust their balls.
-
I used the pliers on my wave to hold a razor head since I forgot the handles and dryshaved with said wave. My face burns :ahhh need to get a fresh razor later.
-
Used my mp600 to cut a bunch of coax, unscrew a few wall plates, change coax splitters and strip some ground wire. Then I used the tweezers and straight pin from my champ plus to pull the biggest splinter I've ever had out of my thumb. Ouch. I swear it was 1/4" long and it slid directly under the skin of my cuticle. Fun.
-
MP600 Urban Scout on duty today.
Scissors to trim tags and labels from new clothes.
Philips driver to undo screws on a panel hiding a water line.
Pliers to adjust valve on said water line as there was no knob.
Knife to open mail packet containing new Gerber BO Diesel (to be used in a mod tonight :D). -
MP600 getting work done:
Screwdriver with adapter and newly acquired Pocketwrench II to adjust the height setting on the baby's crib.
Knife to cut threads and salvage some velcro for a sheath mod.
Flat driver to tighten a knob on a water valve.
Pliers to entertain myself while waiting for dinner to cook.
-
I've been using my new BO PST for fiddling purposes this morning in an attempt to loosen it up some. I think it's working...
-
SwissTool Spirit X was used to install a paper towel dispenser today at the shop :D
Sent from Terry's Texting Tool



-
I used my Style CS to trim and file some fingernails.
-
@Aloha007 said:
To show some idiot at the fleamarket that LM is still producing the Wave and many other models and they are not worth the high dollar amount he was asking
Jeez some people are really kidding themselves both at the fleamarket and fleabay with the prices they are wanting. I bring several LMs with me when I go so I can show these smurfholes these tools are common and not some unicorn horn scaled tools. This one guy slowed his roll and asked a bunch of questions and came down a bit but was still higher than amazone. These same guy rarely sale their wares and I see them over and over again. I like to bother them from time to time just to bust their balls.
Good for you
I can't stand seeing sellers take advantage of the unknowing, that's there target audience.Sent from Terry's Texting Tool
-
-
I've been using my new BO PST for fiddling purposes this morning in an attempt to loosen it up some. I think it's working...
Have you tried a bath in boiling water,or a WD40 bath?
Might work on the PST too

No I haven't-does it work wonders on the joints?
As for the PST, does boiling water really help with the stiffness? It's mainly the plier pivot that is the issue at this point. I don't want to ruin the finish or anything, but it sounds like that wouldn't be a problem 
-
Twice today


-
I had to shorten the arms on my rotary airer in the garden. I've moved everything around and there was a little less space than before. After cutting the arms down with an angle grinder, I used a CT41 to file the inside of the hollow aluminium arms so I could get the plastic end stops back in, and a SOG Toolclip to crop off the excess washing line
-
Hi, Al.


-
He is alive :ahhh :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login