Minor mod, guidance (maybe help) needed
-
Ok I don't have a CT but have used some of these bit kits.
Assuming that the shank of the extension holder that came with the sets you bought securely fits into the vic holder, wouldn't it make scene to cut down the shank & JB weld or epoxy a magnet to the tip of that?
If the magnet were fitted to the shank of the extension holder instead of in the vic holder you could use it with any of the CT's you have.
Sorry if this post is a bit rambling but I've just finished a late shift at work
-
@Cauldronborn said:
Ok I don't have a CT but have used some of these bit kits.Assuming that the shank of the extension holder that came with the sets you bought securely fits into the vic holder, wouldn't it make scene to cut down the shank & JB weld or epoxy a magnet to the tip of that?
If the magnet were fitted to the shank of the extension holder instead of in the vic holder you could use it with any of the CT's you have.
Sorry if this post is a bit rambling but I've just finished a late shift at work
The CyberTool bit driver is not magnetic, and uses the ball bearing friction retention method to hold the bits in.
every set of bits I have ever seen use a magnetic retention method.
I am trying to make an adapter that connects to the Cybertool via the ball bearing at the base and has a magnetic retention system at the other end.
this will solve all of my problems. the ratcheting mechanism that I found is just something I think is pretty cool, and will do, "because I can" and for no real need.
-
Silver solder might work better than tape.
-
@Aloha007 said:
I cant understand why Vic didnt offer more bits? I had looked several times for bits with no luck and had the wallworld one you have. I had thought of building up the shank part of the cheap extender then filing it down to fit the CT. I gave up I sure hope this works out.This is about the cheapest US source for replacements:
http://www.opticsplanet.com/victorinox-multi-tools-victorinox-cybertool-bit-swiss-army-knife-accessories.htmlBut there are 7 different bits in total on these two pages here:
http://www.pizzini.at/shop/contents/en-us/d31_schweizermesser-ersatzteil.html -
[quote author=detron link=topic=51016.msg860181#msg860181 date=1394761862]
I am still going to make the ratcheting mod, but the original idea was just solved, and super simple.
should have figured this out a long time ago 
anyway, a 1/4" wide by 3/4" strip of electrical tape.
yep
I tried tape before, but it was too tight. instead of solving it, I dismissed it.nice fit too
so, about a hundredth of a cent worth of tape, and this works great! since I doubt I will be using it every day, so this will work until I can do something a little more permanent.
but here is a short vid on how strong the magnet and the adapter are.
===============================
Here's a cheap solution I came up with to hold non-vic-type bits in the CT:http://blogericious.blogspot.com/2013/06/extending-bit-range-on-your-cybertool.html
-
@neillcurrie said:
[quote author=detron link=topic=51016.msg860181#msg860181 date=1394761862]
I am still going to make the ratcheting mod, but the original idea was just solved, and super simple.
should have figured this out a long time ago 
anyway, a 1/4" wide by 3/4" strip of electrical tape.
yep
I tried tape before, but it was too tight. instead of solving it, I dismissed it.nice fit too
so, about a hundredth of a cent worth of tape, and this works great! since I doubt I will be using it every day, so this will work until I can do something a little more permanent.
but here is a short vid on how strong the magnet and the adapter are.
===============================
Here's a cheap solution I came up with to hold non-vic-type bits in the CT:http://blogericious.blogspot.com/2013/06/extending-bit-range-on-your-cybertool.html
Neilcurrie, thanks for link, and that should suffice for most people, but I am going to pursue this other method, if no reason except than to see what comes of it.
if this fails, then I will try your method
-
Package arrived today with the spare CyberTool bit :ahhh
but instead of the bit, I got this


JB Weld was placed back in it's spot in the basement, no mod fun today :'(
-
Well, I learned that a ratcheting mechanism is useless if the JB Weld manages to get to it.

I managed to make fat adapter that does not ratchet. luckily, it was a cheap tool and I bought two. I will try again

-
A magnet with blue tak is an instant trouble free solution that works great. I did mine and never regretted it. The magnet came from a kid's magnetic earring. But I appreciate the need for adventure and pioneer mods.
-
@kkokkolis said:
A magnet with blue tak is an instant trouble free solution that works great. I did mine and never regretted it. The magnet came from a kid's magnetic earring. But I appreciate the need for adventure and pioneer mods.yeah, I am playing as much as solving my problem, I have tons of rare earth magnets, unfortunately, the smallest ones I have are a tad too big.

Oh well, I just need to buy some smaller ones.
-
well, since I got the wrong item from ebay, I took other peoples advise and just used JB Weld and attached a small magnet to the bottom of the extension.
here are the magnets I got
so here is the update and I am happy with what I have accomplished, even if some of it looks rough.
so here is the bit kit that ended up with.
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140319_141920.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140319_141920.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
From Left to right, we have the ratcheting adapter that has a magnet on the base so it stays in the CT bit driver, and the bit end is also magnetic, so it holds the after market bits with no trouble.
Next we have the quickly modded holder that has the non ratcheting bit adapter, same again a magnet on the base so it stays in the CT bit driver, and the bit end is also magnetic, so it holds the after market bits with no trouble. and 6 bits
The last two are just 24 bits in 2 holdershere you can see where the magnets were attached with JB Weld
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/edited.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/edited.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
the regular adapter only adds an inch and a half or so onto the bit driver. due to the knurled area on the adapter, you can use it in hand without the cybertool as a precision driver.
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140319_142020.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140319_142020.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
the ratcheting driver adds about 2 and a half inches to the length of the bit driver, and is pretty cool. this is not really a needed addition, but after changing the battery in an old voltmeter the other day that had four 2 inch fine thread screws just to get to the battery, I plan on having this in my little kit.
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140319_142125.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140319_142125.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I know things happen and I might loose a magnet, so here is where I keep the spare one!
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140319_142247.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140319_142247.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
PROTOTYPE HOLDER :rofl: nice way to say I completely completely ignored fit and finish, and looked ONLY at functionality :rofl:
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140319_141708.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140319_141708.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140319_142932.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140319_142932.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140319_141735.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140319_141735.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I made this PROTOTYPE :rofl: by first wrapping the kit in electrical tape, sticky side out. then wrapping that in duck tape.
I added the dual loop dangling fixture by duck taping some paracord to the kit holder.here you can see inside the holder
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140319_141831.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140319_141831.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
It needs more tape.
-
It reminds of the package you sent me.
-
Detron, Detron, Detron............. when in doubt add more duct tape. As long as it works that is all that matters. You sir have made me laugh out loud and scare my dog.
-
Detron, Detron, Detron............. when in doubt add more duct tape. As long as it works that is all that matters. You sir have made me laugh out loud and scare my dog.
Which part got you?
Sent from my SPH-L720 using Tapatalk
PROTOTYPE HOLDER nice way to say I completely completely ignored fit and finish, and looked ONLY at functionality
-
Detron, Detron, Detron............. when in doubt add more duct tape. As long as it works that is all that matters. You sir have made me laugh out loud and scare my dog.
Which part got you?
Sent from my SPH-L720 using Tapatalk
PROTOTYPE HOLDER nice way to say I completely completely ignored fit and finish, and looked ONLY at functionality
I assumed that was it, but wanted to make sure. the holder works GREAT, finest DRS product from the last week (DRS is Detron's Redneck Solutions)
-
I like it.
that's us mobile
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login