Minor mod, guidance (maybe help) needed
-
A magnet with blue tak is an instant trouble free solution that works great. I did mine and never regretted it. The magnet came from a kid's magnetic earring. But I appreciate the need for adventure and pioneer mods.
-
@kkokkolis said:
A magnet with blue tak is an instant trouble free solution that works great. I did mine and never regretted it. The magnet came from a kid's magnetic earring. But I appreciate the need for adventure and pioneer mods.yeah, I am playing as much as solving my problem, I have tons of rare earth magnets, unfortunately, the smallest ones I have are a tad too big.

Oh well, I just need to buy some smaller ones.
-
well, since I got the wrong item from ebay, I took other peoples advise and just used JB Weld and attached a small magnet to the bottom of the extension.
here are the magnets I got
so here is the update and I am happy with what I have accomplished, even if some of it looks rough.
so here is the bit kit that ended up with.
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140319_141920.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140319_141920.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
From Left to right, we have the ratcheting adapter that has a magnet on the base so it stays in the CT bit driver, and the bit end is also magnetic, so it holds the after market bits with no trouble.
Next we have the quickly modded holder that has the non ratcheting bit adapter, same again a magnet on the base so it stays in the CT bit driver, and the bit end is also magnetic, so it holds the after market bits with no trouble. and 6 bits
The last two are just 24 bits in 2 holdershere you can see where the magnets were attached with JB Weld
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/edited.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/edited.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
the regular adapter only adds an inch and a half or so onto the bit driver. due to the knurled area on the adapter, you can use it in hand without the cybertool as a precision driver.
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140319_142020.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140319_142020.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
the ratcheting driver adds about 2 and a half inches to the length of the bit driver, and is pretty cool. this is not really a needed addition, but after changing the battery in an old voltmeter the other day that had four 2 inch fine thread screws just to get to the battery, I plan on having this in my little kit.
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140319_142125.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140319_142125.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I know things happen and I might loose a magnet, so here is where I keep the spare one!
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140319_142247.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140319_142247.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
PROTOTYPE HOLDER :rofl: nice way to say I completely completely ignored fit and finish, and looked ONLY at functionality :rofl:
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140319_141708.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140319_141708.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140319_142932.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140319_142932.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140319_141735.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140319_141735.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I made this PROTOTYPE :rofl: by first wrapping the kit in electrical tape, sticky side out. then wrapping that in duck tape.
I added the dual loop dangling fixture by duck taping some paracord to the kit holder.here you can see inside the holder
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140319_141831.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140319_141831.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
It needs more tape.
-
It reminds of the package you sent me.
-
Detron, Detron, Detron............. when in doubt add more duct tape. As long as it works that is all that matters. You sir have made me laugh out loud and scare my dog.
-
Detron, Detron, Detron............. when in doubt add more duct tape. As long as it works that is all that matters. You sir have made me laugh out loud and scare my dog.
Which part got you?
Sent from my SPH-L720 using Tapatalk
PROTOTYPE HOLDER nice way to say I completely completely ignored fit and finish, and looked ONLY at functionality
-
Detron, Detron, Detron............. when in doubt add more duct tape. As long as it works that is all that matters. You sir have made me laugh out loud and scare my dog.
Which part got you?
Sent from my SPH-L720 using Tapatalk
PROTOTYPE HOLDER nice way to say I completely completely ignored fit and finish, and looked ONLY at functionality
I assumed that was it, but wanted to make sure. the holder works GREAT, finest DRS product from the last week (DRS is Detron's Redneck Solutions)
-
I like it.
that's us mobile
-
-
An oxygen acetylene torch and braze them together?
I grew up on a farm, if I was around there, that would be what I would do, but, I am not. :'(
What about finding about an inch or two of steel tubing that'll just slide over both items, then JB Weld everything together?
now that I have done this, it is not a big deal. I am going to do like you and put a magnet into the end of my Cyber-Yeoman.
@detron said:
well, since I got the wrong item from ebay, I took other peoples advise and just used JB Weld and attached a small magnet to the bottom of the extension.here are the magnets I got
so here is the update and I am happy with what I have accomplished, even if some of it looks rough.
so here is the bit kit that ended up with.
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140319_141920.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140319_141920.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
From Left to right, we have the ratcheting adapter that has a magnet on the base so it stays in the CT bit driver, and the bit end is also magnetic, so it holds the after market bits with no trouble.
Next we have the quickly modded holder that has the non ratcheting bit adapter, same again a magnet on the base so it stays in the CT bit driver, and the bit end is also magnetic, so it holds the after market bits with no trouble. and 6 bits
The last two are just 24 bits in 2 holdershere you can see where the magnets were attached with JB Weld
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/edited.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/edited.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
the regular adapter only adds an inch and a half or so onto the bit driver. due to the knurled area on the adapter, you can use it in hand without the cybertool as a precision driver.
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140319_142020.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140319_142020.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
the ratcheting driver adds about 2 and a half inches to the length of the bit driver, and is pretty cool. this is not really a needed addition, but after changing the battery in an old voltmeter the other day that had four 2 inch fine thread screws just to get to the battery, I plan on having this in my little kit.
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140319_142125.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140319_142125.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I know things happen and I might loose a magnet, so here is where I keep the spare one!
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140319_142247.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140319_142247.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
PROTOTYPE HOLDER
nice way to say I completely completely ignored fit and finish, and looked ONLY at functionality 
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140319_141708.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140319_141708.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140319_142932.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140319_142932.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140319_141735.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140319_141735.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I made this PROTOTYPE
by first wrapping the kit in electrical tape, sticky side out. then wrapping that in duck tape.
I added the dual loop dangling fixture by duck taping some paracord to the kit holder.here you can see inside the holder
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/Cyber-Yeoman/20140319_141831.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/Cyber-Yeoman/20140319_141831.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
this set has knurled grip, this will give you a short and a long one.
the one from Lowe's had a ratcheting mechanism, I do not really NEED it, but I was playing and it was fun.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login