one hand challenge
-
I tested some of my tools some time ago when I injured my left hand. The leatherman Crater is very easy to use one handed, so is the Gerber Octane and Buck xtract.
Sent from a device made from star dust using tapatalk
-

OK, an old video I did a couple of years ago. I never tried to OHO a SAK with gloves though. :D
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
SwissChamp ended the challenge like an ambidextrous Champ ...
although it prefers lefthanded OH corkscrew opening :DOne for all, all for one.

-
Too easy. :P

OK, an old video I did a couple of years ago. I never tried to OHO a SAK with gloves though. :D
it was like watching a magic show! :)
-
it might be slight off hand
-
Sidekick and Surge both passed :)
-
Ok. Tried the same tools with light and heavy weight gloves. Pretty well got the results I was expecting.
Belt Knife: no problems left or right hand (just needed to go slow as the traction plan on some of the gloves is a bit lacking)
Leatherman OHT: easy in the light gloves, more problematic in heavy gloves especially for the drivers and can opener.
Gerber MP600: light gloves performed about as well as bare handed. Heavy gloves made inner tools a pain, but doable by pulling out the longer tools and pressing the lock tab back against my leg to raise the inner tools a bit.
Vic Compact: impossible to one hand with gloves. Was expecting this result as I couldn't reasonably manage it with bare hands.
Benchmade 915 Triage: blade was no problems in either pair, just had to go slower with the heavy mitts. Closing was a bit trickier to engage the axis lock, but still doable. Hook wasn't bad at all with gloves as it was easy to catch the stud on the material. Closing was also easy as it is just a detent and no lock.
Bic Lighter: didn't do this one as the gloves would melt/catch fire that close to the flame and hot metal as they make my fingers much fatter than when bare handed.
Leatherman ReCharge: Pliers and outside tools were again no problem. Inner tools were difficult with light gloves and very difficult with heavy gloves. -
I failed miserably with heavy gloves. could be because they don't really fit but still failed.
good thing for this...

toolslinger, I missed what exactly is your ReCharge?
-
Do fingerless gloves count?
that's us mobile
-
OK, I dare you!


-
Fingerless gloves are basically bare hands for tool use. Boxing gloves would be pretty well impossible to get the tools out, let alone do anything with them once they were deployed. (I also don't have or know anyone who has boxing gloves...)
-
My ReCharge is a modified Charge TTi (old style handle scales).
Tool Load Out
ReBar plier head instead of standard plier head
S30v Plain blade
440c Serrated blade
Diamond File
Wood Saw
Large Bit Driver
Small Flathead from ReBar
Scissors
Large Flathead
Awl from ReBarI'm hoping to close a deal on a decent camera before the weekend. My last deal fell through. Then I can post a dedicated thread with pics
. -
@Toolslinger said:
Fingerless gloves are basically bare hands for tool use. Boxing gloves would be pretty well impossible to get the tools out, let alone do anything with them once they were deployed. (I also don't have or know anyone who has boxing gloves...)Well, imagine you are at a boxing match and you win and suddenly everyone start shouting because they think you cheated and you have to run and you go into a small room with only a small window with a metal grid screwed over it and you only have a SwissChamp on a table nearby and they are breaking the door down and one of your hands is holding the door and you only have one hand to open the knife. It's possible...

-
It could happen.
that's us mobile
-
@Toolslinger said:
My ReCharge is a modified Charge TTi (old style handle scales).Tool Load Out
ReBar plier head instead of standard plier head
S30v Plain blade
440c Serrated blade
Diamond File
Wood Saw
Large Bit Driver
Small Flathead from ReBar
Scissors
Large Flathead
Awl from ReBarI'm hoping to close a deal on a decent camera before the weekend. My last deal fell through. Then I can post a dedicated thread with pics
.now that sounds like a LM that even I'd use
tried the Douk Douk with gloves and it worked very well. might be psychological as it wouldn't cut me nearly as bad
-
Fingerless gloves are basically bare hands for tool use. Boxing gloves would be pretty well impossible to get the tools out, let alone do anything with them once they were deployed. (I also don't have or know anyone who has boxing gloves...)
Well, imagine you are at a boxing match and you win and suddenly everyone start shouting because they think you cheated and you have to run and you go into a small room with only a small window with a metal grid screwed over it and you only have a SwissChamp on a table nearby and they are breaking the door down and one of your hands is holding the door and you only have one hand to open the knife. It's possible...

It's possible, but at that point I'd use my teeth to undo the strap on the free hand. Even with the hands taped up underneath, I'd still be more functional.

-
I have boxing gloves :)
More likely scenario: You are in a bar with your friends and you have a competition for who can unscrew a screw from a table the fastest while wearing boxing gloves and using a multitool :)
-
Skeletool: Managed to open the blade, one scale for screwdriver mode, and both scales for pliers mode with the tool in either in free space, and close it again. I even managed to change the bits setting the tool down on my leg and/or using my mouth to pull the bits from the driver.
They'll go into the driver by placing them in, holding the tool up and pushing the button, but shaking them upside down won't eject them, good to know.Wave: Outside tools no problem, I had a little difficulty with the file with my left hand. Secondaries, I failed to open the can opener at all and failed the large flat blade with my left hand. I had to set the tool on my leg to manipulate the secondaries. The Wave has the easiest pliers to open, since they can be "flung" open in a balisong-like motion.
Wingman: No trouble at all. In fact, it's the easiest I have.
Style CS: Scissors, no problem. Nail file, no problem. Blade, for safety I used my leg/pants to open the blade, but I was able. Tweezers, I was able to extract using my teeth.

I rarely if ever wear gloves, so these were all done with bare hands.
This is a good exercise. It makes you think about how you use your multitools in emergencies.
It makes me think of another scenario, and we might start another thread about this: The odd-hand draw. In your EDC system as you normally carry it, can you take out a knife with either hand?
As for the boxing gloves, Strong Bad could do it.
-
that actually might make for an interesting challenge. now just to find my pants and get on it....
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login