Jeep light install
-
That's the plan. These are incandescent at the moment, as that is what the replacement lights came with.
Def
-
I really like what you've done because it all looks so neat.
So often you see 4x4s with loads of silly lights all over the place looking completely ridiculous but you've got a functional and good looking solution.
-
You mean like this one?

:D
Seriously, this is probably all the lighting I will do on this Jeep. I might do some other minor things, but I'm not going to put an external frame on the windshield and mount more lights on it like some guys do.

I'm not that afraid of the dark! :P
As it is, the LED windshield lights are more flood than spot, so they really illuminate the hood more than I'd like or need. I will probably do a similar light setup on my TJ, except that I will mount the LED lights on the bumper (where it currently has fog lights) and put something more spot-light-ish on the windshield brackets so I don't get as much reflection from the hood.
I did however order an interior LED kit today, to replace the interior lights. They will look like the ones in my friend Alex's video:
Def
-
Now don't pick on your boss Def!

-
He was asked once, at noon on a sunny day to turn his lights off on a work site because he was blinding people. Seriously.
Def
-
My clear signal lights arrived a couple of days ago, and I was pretty excited to install them.

That is, until I found out that I have to take half the bloody fender apart to do it!
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
What a pain in the arse. I guess I'll wait until the nicer weather to do it, and probably also do the signal light mod as well. One of the dumb things about these marker lights on the fender is that they really don't do anything, but with a small modification (one wire or two, depending on how you do it) you can get them to flash with (or opposite) the signal on the front. To me it makes more sense to have a signal that flashes on the side as well as the front, but for some reason the folks at Dodge didn't think this was necessary. ::)
Luckily it's an easy enough fix!
Def
-
Can't wait to see the new ones on it.
that's us mobile
-
Nicer weather? Oh come on, this is spring! You don't get nicer weather!
lol, heck we got snow yesterday,, JR -
@MadPlumbarian said:
Nicer weather? Oh come on, this is spring! You don't get nicer weather!
lol, heck we got snow yesterday,, JRWe are experiencing what all the weather outlets are saying is going to be the worst storm in ten years, with 70mph winds and about a foot and a half to two feet of snow.
If you want to go out and crawl around under a truck in that and play with wiring, by all means, go for it. I'm going to stay inside, drink hot chocolate and watch TV until the power goes out. :P
Def
-
seeing as it's a storm... shouldn't you be standing around for hours at autoport? :P
-
I would, but no one is coming to visit and I'm not in Chicago!

Def
-
The interior LED kit arrived the other day and I haven't had much of a chance to do much with them yet. The worst part is, there are twelve "bulbs" but no identification for each. According to the seller the set includes the following:
Front Dome Light X 1
Front map lightsx2
Vanity Mirror Light X 2
Golve Box Light X 1
Under Dash Light X 2
Trunk Light X 2
License Plate Light X 2
But, they don't tell you which ones are which, which I find annoying. I have identified the map reading lights so far, which are the ones on the first crossbar, just above the driver and passenger seats. I had a quick look at them while waiting for labor on a job this morning, and figured out which set of LED's should replace them. Here is the BEFORE photo:
These are the standard incandescent bulbs that come with the Jeep. Here is the comparison after I replaced the first bulb:
I didn't bother trying to get a photo once both were replaced because all you'd see are just bright white lights! :ahhh
Two down, ten more to go....
Def
-
More LED's installed today- or at least attempted to...
The Jeep silliness has continued in that there is a slot cut out in the glove box for a switch, but there is no light, nor any place to put one. And, no switch. It seems like I have been a bit cheated as some research has shown me that some JK's have come with a switch and no light. I will have to complain to my dealer about that.

Oh well, onward and backwards. I opened the rear dome light and found this old glass fuse type bulb.
As you can see, it's plenty bright on it's own.
Since I am guessing as to what lights go where, my next thought was that this is one of the small bar lights with the big heat sink on the back.
After popping the old light out I compared the two:
I don't know how well it shows up in the photos, but the LED is ever so slightly thinner than the original one, which meant that it was a bit loose in the clips. It still works though, and it's a lot brighter than the original. The question is, will it move around and possibly break contact and not work until it is moved back? If so that will be frustrating, but not the end of the world. If it does I might secure it in place with a little bit of glue.
So then I went to replace the light over the license plate, which was actually a lot easier to replace than I think any of the other lights were. Just squeeze the two clips on either side of teh lens and it pops right out.
The original one wasn't all that bright, but I really don't worry too much about my plate being visible since most people put those plastic shields over them to obscure them, or leave snow all over them so they are unreadable etc.
Out pops the housing:
In goes the LED:
Which is nice and bright:
But then doesn't fit back in the lens housing, so I have to pull it back out and go back to the incandescent bulb.
So, just to review, here's what I have so far:
Front Dome Light X 1 No such thing in this Jeep
Front map lightsx2 Replaced, functional
Vanity Mirror Light X 2 Doesn't exist in this truck
Golve Box Light X 1 Dodge apparently forgot that they were supposed to install these
Under Dash Light X 2 Not found or believed to exist
Trunk Light X 2 Not found or believed to exist
License Plate Light X 2 Only need one, and the bloody thing doesn't fit
So, that's it- three out of twelve. Not my best score ever, that's for sure.
Def
-
So what's next? JR
Ah cool that was my 2500th post! -
For the immediate future I plan to contact the seller and complain about these sets, especially as I had bought two sets- one for me and one for Jeff. I had thought about stealing one of the lights I used for the interior from his set to light up my license plate, but it seems those bulbs are actually missing from his set already.
I will contact the seller to straighten this out, and I imagine I will get satisfaction since I have not yet left feedback. >:D
In the slightly longer term, I need to chase down a short in my HID headlights, since often one or the other won't light up. Also, the switch that controls my green flashers seems to have a short in it as well, so I will have to look at fixing or replacing it too.
Def
-
surely you can pop the fuse style bulb out of the fuse clips and squeeze them tighter, that way you should have less/no movement.
-
I have been trading messages with the seller on eBay and so far things seem well. They are going to send out replacement bulbs which I appreciate. I have also sent them a link to this thread and some photos explaining which bulbs were missing. I have also asked if they have additional LED bulbs that I need to replace the incandescent bulbs I have in my signal and marker lights.
With any luck I'll be installing more LED bulbs in a month or so.
Which of course leads me to wonder, why the heck don't manufacturers just install LED's in the first place? They are cheaper, longer lasting, less temperamental, brighter and draw less energy which should increase fuel economy, shouldn't it?
Unless they are in some kind of unholy agreement with Sylvania or Phillips, I just can't see the point.
Def
-
Yep, makes no sense nowadays for cars to come with incandescent bulbs. LED bulbs are of much better quality now and are also super cheap.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login














