Piranha 2
-
@Lam.Kampfer said:
Being more versatile, it can drive LM's large selection of 2 dimensional bits in addition to normal hex bits.Seen like the new added slot will hold the bits in place during usage, which is a improvement.
Now I think about, can't the normal Piranha use 2D bits with 1/4" hex holder? I think so, that makes Piranha 2 totally un necessary.
-
Being more versatile, it can drive LM's large selection of 2 dimensional bits in addition to normal hex bits.
Seen like the new added slot will hold the bits in place during usage, which is a improvement.
Now I think about, can't the normal Piranha use 2D bits with 1/4" hex holder? I think so, that makes Piranha 2 totally un necessary.
yes it can Lam but they fall out easy.
still I,agree unnecessary
if it works go with it is what I say.
-
@Mr. Whippy said:
Bob, is that for real?It mirrors almost exactly how early Gen Piranha broke. Don't these guys do research or math or something?

That's just my amateur photoshop work Nate, I don't actually have one of these tools. :-\
-
Does it bug anyone else that the Piranha has both a 1/2 inch and a 13mm driver? Since 13mm is a few microns larger than 1/2 inch, they should have gone for 12 and 14 on the Metric side.
-
Waiting for a smaller wrench to appear on the multitools, similar to some select Wenger tools had, but of more usable sizes of 1/2, 5/16, 3/8 inch.
Leatherman already had a 1/2 & 3/8 inch wrench. If that could by implemented into a multitool, via a smaller piranha-like driver, it would be a lot better than a redundant flathead driver.
Those that work on top-side battery terminals will appreciate an easier to access 1/2 & 3/8 inch wrench.
Rant:
Spoiler:
If Wenger had used their heads and at least started at 3/8 on their Universal Wrenches they might had gotten more popular. If I had he tools and ability, would reprofile the wrench bottom to accommodate 3/8" opening, and working it back. Not sure how much metal would have to be taken down, and probably would require computer aided tooling. -
The other thing is how the Piranha has what? 3 1/4" drivers? The smallest in the English jaw, the "eye" or bit driver, and the bottle opener. I really think they could have clevered on this tool a little more.
-
@av8r1 said:
The other thing is how the Piranha has what? 3 1/4" drivers? The smallest in the English jaw, the "eye" or bit driver, and the bottle opener. I really think they could have clevered on this tool a little more.I agree
a little more thought should have went into it.
Im still am going to get one but I am not in a big rush.
-
I do have one on its way, and because of this thread, I am dying to get a closer look at it.
-
What size wrench does the piranha have?
-
Product spec:
http://www.leatherman.com/831680.html#start=9 -
I just got my copy today. Here is a write up on it and the other two family members.
</topic/51428
-
What size wrench does the piranha have?
•Open Wrench (SAE): 9/16, 1/2, 7/16, 3/8, 5/16, 1/4"
•Closed Wrench (Metric): 6, 8, 10, 13, 15mmThose are practically the same size. I kinda wish they thought hat through a little better and gave us 12 and 14 mm instead, but I think I said that already.
-
What size wrench does the piranha have?
•Open Wrench (SAE): 9/16, 1/2, 7/16, 3/8, 5/16, 1/4"
•Closed Wrench (Metric): 6, 8, 10, 13, 15mmThose are practically the same size. I kinda wish they thought hat through a little better and gave us 12 and 14 mm instead, but I think I said that already.
13mm is used a -lot- more though, so it's not entirely weird.
-
I know this doesn't add anything useful to this thread, but every time I see this thread title pop up, I just think of the low-budget horror movie series 'Piranha', 'Piranha 2', and the hilariously titled 'Piranha 3DD'.
And now, back to your regularly scheduled tool discussion...
-
I forgot all about the piranha moves .

-
What size wrench does the piranha have?
•Open Wrench (SAE): 9/16, 1/2, 7/16, 3/8, 5/16, 1/4"
•Closed Wrench (Metric): 6, 8, 10, 13, 15mmThose are practically the same size. I kinda wish they thought hat through a little better and gave us 12 and 14 mm instead, but I think I said that already.
8mm and 5/16" are interchangeable as well.
-
Or they could have licensed the Pocket Wrench's system. And fit pretty much everything.
-
I have yet to see a piranha 2 in person. All the stores I get too still only have the 1.
I like what I've seen on the net.
I got to see it in person. The grinding is totally different I'm not sure if I like it.
hmm
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login