What's your latest Leatherman?
-
Sawman aka Steve is my buddy and the realist person here.
he collects what he likes and speaks his mind.
most folks go with the flow here and are along for the ride
sawman does what he wants .
I respect him for that.he is a leader not a follower
-
I just traded my Mrs a new micra for her old well used one.
her old one needs alot of TLC.
its been living in the bottom of her purse for years now it deserves a new home

-
Hmmm how does one sharpen a micra?
Sent from a Sega Dreamcast.
-
@hrvstmn31 said:
Hmmm how does one sharpen a micra?Sent from a Sega Dreamcast.
sharpen the side with the edge and just remove the burr left on the other side.
I hope that makes sense.
-
Hmmm how does one sharpen a micra?
Sent from a Sega Dreamcast.
sharpen the side with the edge and just remove the burr left on the other side.
I hope that makes sense.
Oh I meant the scissors as for chisel grinds I just suck at sharpening those.
-
Hmmm how does one sharpen a micra?
Sent from a Sega Dreamcast.
sharpen the side with the edge and just remove the burr left on the other side.
I hope that makes sense.
Oh I meant the scissors as for chisel grinds I just suck at sharpening those.
ok
I use fine grit sandpaper. 600 grit is what I normally use.
find the angle by rocking the blade on the paper. You should be able to feel when you got the edge flat against it. Use soft pressure . It should only take a few passes over the paper . I finish mine by taking the burr of the edge off by laying the blades flat on the paper and sanding inside surfaces of them.
it works for me but I'm sure that someone knows a better way.
again I hope I sort of make sense.

-
Orange Juice S2 in the mail today

finally I can stop bitching about my C2 having a corkscrew and no scissors. :)
-
I got a squirt es4 in the mail today from leatherman warranty/repair dept.
I'm liking it so far.
I am leaving my micra at home. The es4 has a little scissors.

-
I got a squirt es4 in the mail today from leatherman warranty/repair dept.
I'm liking it so far.
I am leaving my micra at home. The es4 has a little scissors.

That's cool. Have you had a chance to test the wire stripper?
no not yet Steve I just got it a few minutes ago.
all I know so far it fits in my skinith with the rest of my tools like it was made for it.
-
I got a squirt es4 in the mail today from leatherman warranty/repair dept.
I'm liking it so far.
I am leaving my micra at home. The es4 has a little scissors.

That's cool. Have you had a chance to test the wire stripper?
no not yet Steve I just got it a few minutes ago.
all I know so far it fits in my skinith with the rest of my tools like it was made for it.
I was gonna buy a Skinth but they all say they don't fit the needle nose MP600 (only the blunt nose). I guess I'll have to carry it in the sheath it comes with which is a very nice sheath but no room for LM adapter and bit card ::)
-
I got a squirt es4 in the mail today from leatherman warranty/repair dept.
I'm liking it so far.
I am leaving my micra at home. The es4 has a little scissors.

That's cool. Have you had a chance to test the wire stripper?
no not yet Steve I just got it a few minutes ago.
all I know so far it fits in my skinith with the rest of my tools like it was made for it.
I was gonna buy a Skinth but they all say they don't fit the needle nose MP600 (only the blunt nose). I guess I'll have to carry it in the sheath it comes with which is a very nice sheath but no room for LM adapter and bit card ::)
lol
I heard the same thing.
that was one of the reasons I bought a blunt nose.
thoughts
the es4 stripper goes from 20 to 12 gauge . I wish it went down to 10. It should work fine for me though. Most of the wiring I mess with is automotive and normally fairly thin so I should be ok.
-
I got a squirt es4 in the mail today from leatherman warranty/repair dept.
I'm liking it so far.
I am leaving my micra at home. The es4 has a little scissors.

That's cool. Have you had a chance to test the wire stripper?
no not yet Steve I just got it a few minutes ago.
all I know so far it fits in my skinith with the rest of my tools like it was made for it.
I was gonna buy a Skinth but they all say they don't fit the needle nose MP600 (only the blunt nose). I guess I'll have to carry it in the sheath it comes with which is a very nice sheath but no room for LM adapter and bit card ::)
Actually, the MUT Shield fits the NN MP600's ;)
According to my rough measurement just now, the MP600 is 5.1 inches long, so it might or might not fit the Skinth Plus, I think it will fit the XL though. At least, that would make sense :P
-
Thanks for that info, I will keep that in mind.

-
[quote author=JAfromMn link=topic=33794.msg876671#msg876671 date=1397496728]
I got a squirt es4 in the mail today from leatherman warranty/repair dept.I'm liking it so far.
I am leaving my micra at home. The es4 has a little scissors.

That's cool. Have you had a chance to test the wire stripper?
no not yet Steve I just got it a few minutes ago.
all I know so far it fits in my skinith with the rest of my tools like it was made for it.
I was gonna buy a Skinth but they all say they don't fit the needle nose MP600 (only the blunt nose). I guess I'll have to carry it in the sheath it comes with which is a very nice sheath but no room for LM adapter and bit card ::)
lol
I heard the same thing.
that was one of the reasons I bought a blunt nose.
thoughts
the es4 stripper goes from 20 to 12 gauge . I wish it went down to 10. It should work fine for me though. Most of the wiring I mess with is automotive and normally fairly thin so I should be ok.
[/quote]well I did a little testing and the es4 strips wire,great.
I tested it on some telephone wire and the wire I use for water meter remote readers and it worked awesome.
my st300 has a hard time stripping the little stuff. The es4 will be part if my work edc from now on.
I am very happy with leatherman warranty dept.
I am going to write them a thank you email. I'm very impressed.
-
Someone just won a "near unicorn" on eBay: a green LM Juice !!!!!!

Was it anyone on MTO ? If so, own up so we can congratulate you for getting a rare piece of LM history

I've wanted one for ages, and my search continues.........
-
@gregozedobe said:
Someone just won a "near unicorn" on eBay: a green LM Juice !!!!!!
Was it anyone on MTO ? If so, own up so we can congratulate you for getting a rare piece of LM history

I've wanted one for ages, and my search continues.........
I'm almost afraid to ask... but how much did it go for?
-
I will soon be the (hopefully) proud owner of a Raptor! :ahhh
I'm very excited about this tool. I liked it so much I broke one of my main rules and actually paid the over-priced cost of $74.95. But the good news is that includes 2-day Prime shipping :)
-
@sawman said:
I will soon be the (hopefully) proud owner of a Raptor! :ahhhI'm very excited about this tool. I liked it so much I broke one of my main rules and actually paid the over-priced cost of $74.95. But the good news is that includes 2-day Prime shipping :)
Let us know what you think once you get it.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login