58mm colours
-
@RedRamage said:
Hey rmagralha...I've loving your Avatar. Do you have a big version of that? If so, can you post it in this thread?
</topic/50959I'm trying to get a list of colors of Alox there.
Sure, no problem, take a look at here:
</topic/44512
Is a thread that I started with my collection, and has this picture in a larger size.
;)
-
Okay, on a related, but different note... I finally got a 58mm SilverTech. Very gorgeous looking knife, but also NOT what I was expecting. I had assumed it was just like the translucent colors, but clear instead of tinted. But obviously this isn't what it is.
I think one could make the case that this should NOT be included in the list of 'solid colors' offered by Victorinox. There is a definite and deliberate pattern to the coloration of this knife. Parts of it are obviously clear, but there are parts that are silver colored. So in someways this is no different than a camo colors knife... two (or more) colors with a definite pattern to it.
That said I think a case can also be made that this does belong among the solid colors. Even the 'clear' parts have the silver color too them as because you never see anything but the silver color or silver metal.
Yeah, I know there isn't an sort of official check list from Victorinox or any governing body that makes something official or un-official so it's really just what each individual collector does or doesn't want to collect. But I still think it's an interesting debate. Anyone want to weigh in?
-
As previously stated, my 58mm display was planned and put together on the basis of there being 32 shades so you can imagine my disappointment (or not) on discovering that were really only 31 :(. I did consider the Silvertech but dismissed it because it hangs "upside down" (yes, I know, petty and OCD) and so have decided that a nylon economy-scaled Classic will fill the gap nicely whilst maintaining symmetry, continuity and order. :ahhh
-
@gardenvalley said:
I did consider the Silvertech but dismissed it because it hangs "upside down" (yes, I know, petty and OCD) and so have decided that a nylon economy-scaled Classic will fill the gap nicely whilst maintaining symmetry, continuity and order. :ahhhWhile I think that's a very valid reason to exclude it, I wonder what you'd think it hung 'right side up'? Fortunately my case is not 'keyring geometry' dependant, so it's still a possibility for me. But my own version of OCD makes me question it 'cause, as I said, it isn't technically one solid color. Ahh the silliness of collecting, no?
Two other options for you to consider:
-
Move the scales. I've never tried with this a classic but I have popped off the scales on other knife and replaced them with other scales. With a classic as they are symmetrical it should, theoretically, be possible to turn them upside down and put 'em back on.
-
Victorinox released a Rosewood Scaled Classic in the past. While not an cellidor scaled model, and therefore not part of the 'colors' collection, it isn't a nice one looking knife and an officially released model with toothpick/tweezers, etc.
-
-
Time for a two week update...
I'm not seeing anymore extensive fading... but of course it's still a relatively short time and we're still in Michigan without copious amounts of sun. While the middle knife might be a little lighter, one this is it does NOT seem to be getting that rich orange color that I'm seeing in the knife on the left. It's still what I'd call "grey-brown" rather than "orange-brown." This seems to put some weight on the idea of a separate translucent brown color. Still too early to call it though... I'd say we'll need at least two or three months of time considering the lack of good sun we get here.
Thoughts?

-
BTW, garden... I did some surgery on my silver tech. I think the results ended up really good. I used some tips user gave me in this thread: </topic/51326
Flipped the LED scale and pushed it back on. Looks good, and the LED still works as well.
Obviously this isn't practical for hanging on a keychain, but for a collection that looks better with the logo at the top, it works well!
-
That is indeed a solution which i have considered but it would mean buying a fairly expensive and very useful knife and relegating it to display duties. I intend to complete my display with a red nylon Classic which fills the gap and adds to the under-represented red contingent. Only 2 more to get but they are proving to be quite elusive, in fact I`ve seen more Sea Pioneers than 58mm Sage Green on the bay recently !
-
This is all very interesting and a number of poeple have done a great deal of work trying to determine available colors. Does Victorinox not have a historian or public affairs person who could provide all the color data?
-
I've emailed in the past and not gotten a response from them. I think part of the problem is that there isn't really a historic record of this sort of thing. I don't think the collector market is big enough to really warrant keeping well documented, accurate records. Certainly in the decades in the past this was true.
All the information that I've obtained was from forums, a few books, and lots and lots of help from other collectors. So far I haven't found anything beyond the 32 colors (though I am curious about that other green you got off eBay).
The 32 is really something I put out there years ago after the work of collecting them. I never found any beyond those 32 so that's why I said there were that many. But I'm certainly not infallible, and because it's just my opinion there's certainly room for debate.
-
@RedRamage said:
Okay, on a related, but different note... I finally got a 58mm SilverTech. Very gorgeous looking knife, but also NOT what I was expecting. I had assumed it was just like the translucent colors, but clear instead of tinted. But obviously this isn't what it is.I think one could make the case that this should NOT be included in the list of 'solid colors' offered by Victorinox. There is a definite and deliberate pattern to the coloration of this knife. Parts of it are obviously clear, but there are parts that are silver colored. So in someways this is no different than a camo colors knife... two (or more) colors with a definite pattern to it.
Just want to raise this question again... attached is a pic of the monochrome colors. I think it's especially telling when you look at the silvertech compared to the onyx. There is a definite pattern, a decoration to the Silvertech that is NOT present in the other translucent colors. I'm going to say that this does NOT belong in the list of solid colors. The fact
If we agree that SilverTech should be removed and if we agree that the Translucent Brown is really faded Onyx (still some debate here), then we're down to 31 colors...
BUT, thanks to some good work by SingleShot, a new shade of green was discovered, which brings us right back up to 32! You can see more about the Forest Green here: </topic/51518

-
I made the following changes to the Colors Page on the wiki: (http://sakwiki.com/tiki-index.php?page=Color+Palette)
The orange group includes four shades including some browns. The group is: Translucent Orange, Taupe, Electric Orange,
Translucent Brown, and Rust. Upon further examination and research, some Translucent Brown knifes are definitely a faded Onyx rather than a separate color by itself. There is continuing debate regarding if all Trans. Brown are faded Onyx. (See the link in the first comment at the bottom of the page for pictures and discussion.)The green group from Victorinox provides six shades: Pale Green, Retro Green, Hunter Green, Emerald (Translucent Green), and Sage. Hunter is often referred to as simply Green. Not pictured is Forest Green. It's a lighter color green than Hunter, but still much darker than the Pale Green.
The monochrome groups covers all the shades from white to black. They are: White, Gray, Onyx (Translucent Black), and Black. Not pictured is a scale called SilverTech. This scale is a mix of translucent clear with some area filled in with silver. Because there is a pattern to this knife it isn't technically a solid color, though some may include it with this group.
If anyone feels this info is in error, please let me know. I think we're "officially" still at 32 colors. Subtract Trans. Brown and Add Forest Green. While I briefly put Silver Tech in there, I'm included to exclude it after getting my hands on one and seeing the pattern in it.
-
So here's 5 weeks in the window. It's starting to take on a warmer color... though it's still a long way from looking like the orange brown on the left.

-
After about two and a half months in the window I think it's definitely starting to get some more "orange" color to it. Still not as far to the knife on the left, but it's starting to lose the 'grey' a little more.
Back in the window for a while then I'll get some pictures in mid or late June.
-
Any updates to this thread yet RedRamage? I am going to take some photos of my Translucent Brown as compared to an Onyx soon. I also have another color variant to pose, White.
-
I got these from CVH with a buy of a bunch of scales. It looks to me like chocolate milk color. Not white.
<a href="http://s289.photobucket.com/user/gigahzfemtohz/media/lightbrown58mmscales073_zpse605053c.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i289.photobucket.com/albums/ll211/gigahzfemtohz/lightbrown58mmscales073_zpse605053c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Here is another discrepancy, 2 shades of white?

-
@GigaHz said:
I got these from CVH with a buy of a bunch of scales. It looks to me like chocolate milk color. Not white.<a href="http://s289.photobucket.com/user/gigahzfemtohz/media/lightbrown58mmscales073_zpse605053c.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i289.photobucket.com/albums/ll211/gigahzfemtohz/lightbrown58mmscales073_zpse605053c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Taupe maybe?
-
Yup that sure looks like it.
-
@stressmaster5000 said:
Any updates to this thread yet RedRamage? I am going to take some photos of my Translucent Brown as compared to an Onyx soon. I also have another color variant to pose, White.I'll try and get a new pic this weekend. It's still sitting in my window!
-
@gardenvalley said:
Here is another discrepancy, 2 shades of white?Hard to say for sure, GV. Are these your knives? The right one in the pic almost looks like an aftermarket scale. The scale looks rougher then normal cellidor (might just be wear). But I also noticed that the shield is coming up from the bottom. And the shield appears to be sitting on top of the scale, rather than inlaid into it. But of course it's very hard to tell from a pic.
If these are yours, does the darker white one feel like the same scale material? Does the shield feel like it's sitting on top of the scale?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
