58mm colours
-
I've emailed in the past and not gotten a response from them. I think part of the problem is that there isn't really a historic record of this sort of thing. I don't think the collector market is big enough to really warrant keeping well documented, accurate records. Certainly in the decades in the past this was true.
All the information that I've obtained was from forums, a few books, and lots and lots of help from other collectors. So far I haven't found anything beyond the 32 colors (though I am curious about that other green you got off eBay).
The 32 is really something I put out there years ago after the work of collecting them. I never found any beyond those 32 so that's why I said there were that many. But I'm certainly not infallible, and because it's just my opinion there's certainly room for debate.
-
@RedRamage said:
Okay, on a related, but different note... I finally got a 58mm SilverTech. Very gorgeous looking knife, but also NOT what I was expecting. I had assumed it was just like the translucent colors, but clear instead of tinted. But obviously this isn't what it is.I think one could make the case that this should NOT be included in the list of 'solid colors' offered by Victorinox. There is a definite and deliberate pattern to the coloration of this knife. Parts of it are obviously clear, but there are parts that are silver colored. So in someways this is no different than a camo colors knife... two (or more) colors with a definite pattern to it.
Just want to raise this question again... attached is a pic of the monochrome colors. I think it's especially telling when you look at the silvertech compared to the onyx. There is a definite pattern, a decoration to the Silvertech that is NOT present in the other translucent colors. I'm going to say that this does NOT belong in the list of solid colors. The fact
If we agree that SilverTech should be removed and if we agree that the Translucent Brown is really faded Onyx (still some debate here), then we're down to 31 colors...
BUT, thanks to some good work by SingleShot, a new shade of green was discovered, which brings us right back up to 32! You can see more about the Forest Green here: </topic/51518

-
I made the following changes to the Colors Page on the wiki: (http://sakwiki.com/tiki-index.php?page=Color+Palette)
The orange group includes four shades including some browns. The group is: Translucent Orange, Taupe, Electric Orange,
Translucent Brown, and Rust. Upon further examination and research, some Translucent Brown knifes are definitely a faded Onyx rather than a separate color by itself. There is continuing debate regarding if all Trans. Brown are faded Onyx. (See the link in the first comment at the bottom of the page for pictures and discussion.)The green group from Victorinox provides six shades: Pale Green, Retro Green, Hunter Green, Emerald (Translucent Green), and Sage. Hunter is often referred to as simply Green. Not pictured is Forest Green. It's a lighter color green than Hunter, but still much darker than the Pale Green.
The monochrome groups covers all the shades from white to black. They are: White, Gray, Onyx (Translucent Black), and Black. Not pictured is a scale called SilverTech. This scale is a mix of translucent clear with some area filled in with silver. Because there is a pattern to this knife it isn't technically a solid color, though some may include it with this group.
If anyone feels this info is in error, please let me know. I think we're "officially" still at 32 colors. Subtract Trans. Brown and Add Forest Green. While I briefly put Silver Tech in there, I'm included to exclude it after getting my hands on one and seeing the pattern in it.
-
So here's 5 weeks in the window. It's starting to take on a warmer color... though it's still a long way from looking like the orange brown on the left.

-
After about two and a half months in the window I think it's definitely starting to get some more "orange" color to it. Still not as far to the knife on the left, but it's starting to lose the 'grey' a little more.
Back in the window for a while then I'll get some pictures in mid or late June.
-
Any updates to this thread yet RedRamage? I am going to take some photos of my Translucent Brown as compared to an Onyx soon. I also have another color variant to pose, White.
-
I got these from CVH with a buy of a bunch of scales. It looks to me like chocolate milk color. Not white.
<a href="http://s289.photobucket.com/user/gigahzfemtohz/media/lightbrown58mmscales073_zpse605053c.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i289.photobucket.com/albums/ll211/gigahzfemtohz/lightbrown58mmscales073_zpse605053c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Here is another discrepancy, 2 shades of white?

-
@GigaHz said:
I got these from CVH with a buy of a bunch of scales. It looks to me like chocolate milk color. Not white.<a href="http://s289.photobucket.com/user/gigahzfemtohz/media/lightbrown58mmscales073_zpse605053c.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i289.photobucket.com/albums/ll211/gigahzfemtohz/lightbrown58mmscales073_zpse605053c.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Taupe maybe?
-
Yup that sure looks like it.
-
@stressmaster5000 said:
Any updates to this thread yet RedRamage? I am going to take some photos of my Translucent Brown as compared to an Onyx soon. I also have another color variant to pose, White.I'll try and get a new pic this weekend. It's still sitting in my window!
-
@gardenvalley said:
Here is another discrepancy, 2 shades of white?Hard to say for sure, GV. Are these your knives? The right one in the pic almost looks like an aftermarket scale. The scale looks rougher then normal cellidor (might just be wear). But I also noticed that the shield is coming up from the bottom. And the shield appears to be sitting on top of the scale, rather than inlaid into it. But of course it's very hard to tell from a pic.
If these are yours, does the darker white one feel like the same scale material? Does the shield feel like it's sitting on top of the scale?
-
I am preparing to photograph my 2 different white classics. They are both NIB right from the factory or at least from the Service center here in the US at Monroe, CT. I think GV polishes his knives and the rougher than new surface is because of that. My 2 white variations appear to be ivory/bone white and one more like Gypsum white. I should have some comparison photos shortly.
-
As stated above I made some photos of the white color variation. As you can see in the photos they are NIB right from Victorinox Monroe, CT. The 1st 2 are plain white classics. The last one is a White SwissLite. The variation I think are different due to one being used for the advertisement models with metal inlays versus printed versions. The bone or off white(middle knife) I have seen used for the NFL and other Sports team classics with printed designs. The bright white(1st one) is one I have seen with metal inlay advertisements. Since these came from the service center they do not have any part numbers on them so no idea if there are any different numbers.
-
Here is another discrepancy, 2 shades of white?
Hard to say for sure, GV. Are these your knives? The right one in the pic almost looks like an aftermarket scale. The scale looks rougher then normal cellidor (might just be wear). But I also noticed that the shield is coming up from the bottom. And the shield appears to be sitting on top of the scale, rather than inlaid into it. But of course it's very hard to tell from a pic.
If these are yours, does the darker white one feel like the same scale material? Does the shield feel like it's sitting on top of the scale?
These are both mine, the whiter of the two is exactly the same shade as a new white Spartan I used as a reference. The other one was bought thinking it was Taupe(which I was looking for at the time). The seller described it as white/grey. It is the same shade as the middle one in stressmaster5000
s photo. The shield has lifted slightly and sits slightly proud of the scale(which is genuine) which I think has been caused by a previous owner sanding/polishing out a logo, but thats just a guess. I didnt recondition the scales because it wasnt what I was looking for.Out of interest:http://www.thegoodstuffshop.dk/product.asp?product=29200
-
Update time!!
If you'll recall earlier in this thread we discussed whether translucent brown is really just faded onyx. We've definitely confirmed that Onyx does fade to a brownish color, but the one knife that I definitely have that faded from Onyx didn't look the same as the Translucent Brown that I had in my collection. To test the theory I put a third trans. brown that I had which is closer to the faded Oynx that I had in my window to see what would happen. Here's the pic from the first week:

On the right is the Onyx that was in my collection. On the right is an Onyx from my collection. The back is still pretty close to onyx. The front is, as you can see, faded to a cool brown. On the left is what I thought was a Translucent Brown also from my collection. Finally in middle is the third knife that I'm testing.
Now just over nine months later:

I think there's a pretty big difference now in the middle knife. I think it's warmed up a lot more and is a lot closer to the brown on the left. This obviously isn't proof positive that there wasn't a translucent brown that was ever made, but I think this is pretty darn close to confirming that Onyx CAN become very close to what we traditionally thought was trans. brown. When you combine this with the fact that I've never found a "new" trans. brown as well as never seen a catalog option for trans. brown... Well, I personally think it's safe to say that there isn't a real trans. brown.
-
Thanks for testing this out.

Now, how does one keep a onyx scale black?
Keep it in a box and never look at it? Or in a darkroom? 
-
Good question... After I noticed that my Onyx had faded I got a new Onyx. I keep it in a display case that spends 99% of it's time in my closet covered by another display case so the exposure to light is exceedingly small:

So far it's stayed pretty black, but I do wonder if it'll stay that way. Might just have to get a new Onyx every five years or so to keep the collection up to date. ???
-
Thanks for sharing. I hope I am around in 5 years for the next update.

-
Thanks for the testing. I wanted to get those scales in 91mm for my EDC CT34 but couldn't find them. Very sorry to see them fade like that. Won't be getting any then.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
