Jeep light install
-
surely you can pop the fuse style bulb out of the fuse clips and squeeze them tighter, that way you should have less/no movement.
-
I have been trading messages with the seller on eBay and so far things seem well. They are going to send out replacement bulbs which I appreciate. I have also sent them a link to this thread and some photos explaining which bulbs were missing. I have also asked if they have additional LED bulbs that I need to replace the incandescent bulbs I have in my signal and marker lights.
With any luck I'll be installing more LED bulbs in a month or so.
Which of course leads me to wonder, why the heck don't manufacturers just install LED's in the first place? They are cheaper, longer lasting, less temperamental, brighter and draw less energy which should increase fuel economy, shouldn't it?
Unless they are in some kind of unholy agreement with Sylvania or Phillips, I just can't see the point.
Def
-
Yep, makes no sense nowadays for cars to come with incandescent bulbs. LED bulbs are of much better quality now and are also super cheap.
-
Idk, it would make sense! Heck my microwave took a crap last month and the new one that we got has an led light! I thought it was weird at first cause it just shocked me, but it's neat, so now the only thing in my house that isn't fluorescent or led is the oven or the fridge! JR
-
Watch out for CF bulbs. They have been linked to increases in seizures and other health problems.
I'm slowly replacing a lot of my household bulbs and fixtures to LED ones.
I just don't see the point of incandescent bulbs anymore for general applications. Sure they probably still have their place, but in most day to day things I just don't see the point.
Def
Sent from a digital multitool
-
By the way, this is a photo of the map reading LED bulbs not lit up so you can see what they look like.
I also noticed that the rear dome light is more blue while the ones at the front are more white. Not a real big deal but I wish the one in the back was more white for a more balanced look.
Def
Sent from a digital multitool

-
@Grant Lamontagne said:
Watch out for CF bulbs. They have been linked to increases in seizures and other health problems.I'm slowly replacing a lot of my household bulbs and fixtures to LED ones.
I just don't see the point of incandescent bulbs anymore for general applications. Sure they probably still have their place, but in most day to day things I just don't see the point.
Def
Sent from a digital multitool
Well thanks for that tidbit, I'll have to tell the wife that, I want to change over to the led cause they don't take five min to completely warm up, give a much more clean light, and supposedly last longer, but there expensive, I started a post here about doing so but everyone was pretty much against it since they don't last long as they say.. JR
-
Rather than buy LED bulbs, which I have had issues with, try buying LED fixtures that are designed to work with (and come with) LED bulbs. I have had a lot better luck with those and the light coming off those is a lot nicer.
Def
Sent from a digital multitool
-
@Grant Lamontagne said:
Rather than buy LED bulbs, which I have had issues with, try buying LED fixtures that are designed to work with (and come with) LED bulbs. I have had a lot better luck with those and the light coming off those is a lot nicer.Def
Sent from a digital multitool
I'm sure that's the case, but I don't feel like changing out all my light fixtures, nor am I going to upgrade the hard wired ones since this is a apt, lol. But I do get where your coming from, I'm sure in due time they'll get what the heck there doing wrong and make them last.. Maybe by then the price of them will go down too, just like the cf ones did. JR
-
Not lights, but since this thread seems to have morphed into a Jeep Build thread, here are my new wheels/tires:

This guy wanted to swap his Pro Comp wheels and tires for a stock set, so I jumped at it.

They look great, but boy do they make it ride rough and they are freakin' LOUD!

I think I may try to get another set of factory wheels and tires for this one (maybe the 17" Rubicon ones, pictured below) and put the Pro Comps on my TJ. I'll need to lift it (which I'd already planned to do) and get some spacer/adaptors (which I also planned to do) since the JK series has a slightly different bolt pattern than the TJ series.

Anyways, as they are the only wheels/tires I have for the JK now they'll have to do. :D
Def
-
Those are nice looking! What pressure are you running in them? Might be a little too high if they're quite a bit rougher.
-
Looking good Grant.
live from Nate's mobile
-
Looks good, what's next, a lift? JR
-
No idea the pressure in them. I haven't actually checked that yet. And, there's no TPMS in these ones.
I'm not sure what is next fire this Jeep. I need to concentrate on the TJ for a bit now that it has a plate again.
Def
Sent from a digital multitool
-
Actually I forgot- I have a K&N air filter on the way and a new bug deflector. Those should be in Monday or so.
Def
Sent from a digital multitool
-
I did a quick and dirty calculation a little while back with regards to fitting LED lamps to cars, and reckoned you could probably save in the order of 1/2hp by the time you add up the increased power draw of incandescents and all the inefficiencies you get creating electricity. May not sound like much, but you're probably only using 30hp cruising.
Then there are the other benefits such as not being able to use lighter gauge wire (lighter, cheaper) and not having to build in access to fittings (more flexibility in how you design them, potential space savings). I don't think it would end up being that much more expensive to manufacture and there are definite benefits to all concerned.
-
Today I installed a new bug deflector to replace the one that flew off last week and I put in a new K&N air filter. The filter annoyed the crap out of me- usually you just open a few clips, pull the top of the box open, pull out the old filter, drop in a new one, close the lid, snap the clips shut and away you go. Now apparently you have to undo the clips, loosen the clamp on the breather hose, then unbolt the hose from the top of the radiator before you can open the box.
Thanks Dodge, for taking something simple and complicating it.
Def
Sent from a digital multitool
-
@Grant Lamontagne said:
Today I installed a new bug deflector to replace the one that flew off last week and I put in a new K&N air filter. The filter annoyed the crap out of me- usually you just open a few clips, pull the top of the box open, pull out the old filter, drop in a new one, close the lid, snap the clips shut and away you go. Now apparently you have to undo the clips, loosen the clamp on the breather hose, then unbolt the hose from the top of the radiator before you can open the box.Thanks Dodge, for taking something simple and complicating it.
Def
Sent from a digital multitool
Well if it's harder for you to take out then that's gotta be good in some way? Must be better for off-roading, harder to fall out and loose, no? JR
-
If you know what you are doing you can probably swap it in a minute or two, so my guess is it was done like this for one of two reasons. One, it was probably something that the designers at Dodge just didn't think would be that bad, and/or to make it more difficult for the average, non mechanically inclined person to get adventurous and try something. Knowing what I know now, I will be sure I have the right tools handy when I install it in my friend's Jeep, and I imagine it will be done in under two minutes.
Def
-
Did I mention when my ex-coworker got his (2nd hand) Nissan 4x4, and he complained that it seemed to lack some grunt and had an intermittent check engine light... and the dealership swore they did a complete tune-up/oil/filters etc... he pulled the air filter out and it was full of sand...
new air filter and problem sorted. Of course that was after his truck sat in the dealership parking lot twice for 2 days... 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login