What did you use your Leatherman for today?
-
Forgot i put the camera on bed, and just rolled the blanket, and it flew over the room, hit the furniture..

Checking the damage, found the camera cracked half open, the case sides were apart about 3mm, buttons were impossible to press because the cover was bended outwards, and a little piece of plastic that kept the battery compartment closed was broken.
Pushed the case back together, it just popped in, so no problems there, and glued back the little piece of plastic, (found it with the fenix e05), and then used the file on my rebar to clean the dried excess glue, and make it flush with the rest.
All seems good so far.
-
@jacktrades said:
Forgot i put the camera on bed, and just rolled the blanket, and it flew over the room, hit the furniture..
Checking the damage, found the camera cracked half open, the case sides were apart about 3mm, buttons were impossible to press because the cover was bended outwards, and a little piece of plastic that kept the battery compartment closed was broken.
Pushed the case back together, it just popped in, so no problems there, and glued back the little piece of plastic, (found it with the fenix e05), and then used the file on my rebar to clean the dried excess glue, and make it flush with the rest.
All seems good so far.
That could've been bad, real bad.
-
Used my Surge to do some plumbing today. Had to run some 4inch think wall and 2 inch outside under the house.

live from Nate's mobile
-
I used my Wave and Wingman together to install some PL-259 connectors on some coax I bought. Yay hamfest! 20 feet of low loss antenna feed line for the WIN.
I installed them as seen in this video. I found the Wave's pliers did a better job at gripping and twisting the plug because it had finer teeth and the handles feel smaller in hand. The scissors on the Wingman cut the braid like a BOSS.
-
Just for you Kyle :D
Sent from Terry's Texting Tool


-
That's awesome Terry...who knew they would name a cigar after me and my custom SAK

-
That's awesome Terry...who knew they would name a cigar after me and my custom SAK

Yeah, right?¿? :P That cigar is fairly new but not that new

Never heard of that cigar, but it's been a while since I've had one nor even looked at any :( JR
-
That's awesome Terry...who knew they would name a cigar after me and my custom SAK

Yeah, right?¿? :P That cigar is fairly new but not that new

Bubble burster
:P
-
This'll be fun. I use mine in my job as a Volvo mechanic. I'll try to keep track of everything for one day And update as I go.
Used screwdriver to persuade a stuck washer off an oil drain bolt x1
Used knife to slice off an oil filter gasket x1
Used pliers to pull a broken vacuum fitting out of a 3.2l "vacuum pump"It's only 10am.
Sent from my iPhone using Tapatalk
-
Used my TTi to:
Scrape rust bubbles off of the Jeep
Help install new hot water heater
Cut up screen on old gazebo that blew down
Cut the tip off of a tube of black RTV
Cut zip ties used on my light bar install
Used the file to smooth out a sharp piece of metal on the Jeepand I think that's about it.
-
Wave pliers were used to tighten and adjust cabling that I installed y'day in the studio. Micra was used to cut some gaff tape. Wave phillips screwdriver to tighten some screws on a video camera tripod. Another video production day today. :D
-
Used the flatbread driver on my Crater C33t to scrape ice from a freezer door.
-
Should be flathead.
-
I used the diamond file on my OG Wave as a nail file. Works pretty well. That's why I pair my Explorer with this and the TTi as they have the diamond file while the Explorer lacks a nail file.
-
Was checking my back-up eyeglasses yesterday and found the monofiliament line holding one lens had broken. I was able to fix it today with some fishing line from the garage and an <u>instructable</u>. The Leatherman PS4 scissors work well for trimming fishing line. :)
-
@Stormdrane said:
Was checking my back-up eyeglasses yesterday and found the monofiliament line holding one lens had broken. I was able to fix it today with some fishing line from the garage and an <u>instructable</u>. The Leatherman PS4 scissors work well for trimming fishing line. :)I had never noticed that my lenses are attached this way as well. Interesting article

-
I got to break in my SuperTool today while we were beginning work on our future house. And by work, I mean a degree of demolition, which is more my specialty than anything else :D However, what we did today wasn't the fun type. We pulled up the carpet in a couple rooms, to expose the layer of padding material. Well, this material was very attached to the hardwood floor underneath. Anyway, there were staples around the border of the padding, and I used the smallest flathead to pry them up a bit to allow the pliers to grip them and rip them out. My wife used the pliers to pull up a section of carpet, and used the large flathead as a scraper and pry tool as well. I had told her before we left that it wouldn't hurt for her to carry one of my MTs, but she declined. I think she may do so from now on ;)
-
I forgot to mention that I also used the Crater c33 for cutting some stubborn strands of the carpet that were clinging to corners against the wall as I pulled the carpet up. This is probably the most I've used a MT in a single day (the SuperTool I mean). I think it'll be a good companion during the various projects in the house

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login