What did you use your Leatherman for today?
-
This'll be fun. I use mine in my job as a Volvo mechanic. I'll try to keep track of everything for one day And update as I go.
Used screwdriver to persuade a stuck washer off an oil drain bolt x1
Used knife to slice off an oil filter gasket x1
Used pliers to pull a broken vacuum fitting out of a 3.2l "vacuum pump"It's only 10am.
Sent from my iPhone using Tapatalk
-
Used my TTi to:
Scrape rust bubbles off of the Jeep
Help install new hot water heater
Cut up screen on old gazebo that blew down
Cut the tip off of a tube of black RTV
Cut zip ties used on my light bar install
Used the file to smooth out a sharp piece of metal on the Jeepand I think that's about it.
-
Wave pliers were used to tighten and adjust cabling that I installed y'day in the studio. Micra was used to cut some gaff tape. Wave phillips screwdriver to tighten some screws on a video camera tripod. Another video production day today. :D
-
Used the flatbread driver on my Crater C33t to scrape ice from a freezer door.
-
Should be flathead.
-
I used the diamond file on my OG Wave as a nail file. Works pretty well. That's why I pair my Explorer with this and the TTi as they have the diamond file while the Explorer lacks a nail file.
-
Was checking my back-up eyeglasses yesterday and found the monofiliament line holding one lens had broken. I was able to fix it today with some fishing line from the garage and an <u>instructable</u>. The Leatherman PS4 scissors work well for trimming fishing line. :)
-
@Stormdrane said:
Was checking my back-up eyeglasses yesterday and found the monofiliament line holding one lens had broken. I was able to fix it today with some fishing line from the garage and an <u>instructable</u>. The Leatherman PS4 scissors work well for trimming fishing line. :)I had never noticed that my lenses are attached this way as well. Interesting article

-
I got to break in my SuperTool today while we were beginning work on our future house. And by work, I mean a degree of demolition, which is more my specialty than anything else :D However, what we did today wasn't the fun type. We pulled up the carpet in a couple rooms, to expose the layer of padding material. Well, this material was very attached to the hardwood floor underneath. Anyway, there were staples around the border of the padding, and I used the smallest flathead to pry them up a bit to allow the pliers to grip them and rip them out. My wife used the pliers to pull up a section of carpet, and used the large flathead as a scraper and pry tool as well. I had told her before we left that it wouldn't hurt for her to carry one of my MTs, but she declined. I think she may do so from now on ;)
-
I forgot to mention that I also used the Crater c33 for cutting some stubborn strands of the carpet that were clinging to corners against the wall as I pulled the carpet up. This is probably the most I've used a MT in a single day (the SuperTool I mean). I think it'll be a good companion during the various projects in the house

-
Sounds like libe you have been busy Mongue.
Used my Surge for all kinds of task. The biggest task used to day was cutting barbwire out from under the brushhog that had gotten tangled up in the blades. The hard wire cutter ate it for breakfast.

live from Nate's mobile
-
-
LOL, Jack!
I used mine to ... manage the mechanism that closes my umbrella and close my umbrella...

-
Yeah Nate, we were busy yesterday. I'm feeling it today too. I've let myself get out of shape the last few years, and being on my hands and knees off and on for a few hours, prying/pulling up staples and scraping stuff off the floor has made me feel some muscles in places I haven't felt worked in a while ;)
-
The SuperTool got a good workout (compared to normal for me) again today while continuing the floor work at our house. Primarily staple, nail and carpet pulling. The pliers are proving to be a big help for me so far, at least in this type of work. I can see how a MT would be indispensable to anyone in the tradesman line of work

Anyway, I started off using the smallest flathead to pry the staples up to allow the pliers to finish pulling them up. Unfortunately this resulted in the first battle wound for this gem of a tool: I broke the tip off of the driver. I've since filed it to neaten it up, but here's a pic (not a good one though, sorry):
Here are some pics of the other action for the SuperTool today:
I switched to the medium driver for the staple loosening task, which is probably the one I should have been using to begin with.






-
I should also add that my wife was happy to carry my BORebar today after needing my SuperTool a few times last time we worked at the house. She said she used it, but I'm not sure on what as I was busy doing my own thing. She likely used the pliers at the very least as she was doing similar work to mine, although minus the staple/nail pulling.
-
My new Rebar got its first use this morning, doing quite possibly the most important job it ever will - tightening the handle on a frying pan so I could make a bacon egg and cheese sandwich for breakfast. :D
-
@jerseydevil said:
My new Rebar got its first use this morning, doing quite possibly the most important job it ever will - tightening the handle on a frying pan so I could make a bacon egg and cheese sandwich for breakfast. :DWell that is quite an important task ;) Glad you're liking it so far.
-
I just used my Rebar to put a bird feeder together :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
:P


