And so it begins.... (My adventures into Alox!)
-
@PTRSAK said:
When you get the CNC running you could make up scales without the corkscrew cutout, get then done in HAIII or Cerekote ...I've been thinking about this too. I don't like the way the corkscrew sticks out when you put thin scales on a 91mm knife - so I think I'm going to see what I can replace it with. Got an idea for a knife with philips opposite dual openers and four back tools - awl, chisel, hook and fine driver.
-
In an effort to speed up the custom build process I decided to drill out and prep a few hundred parts so they are ready to go. These have all been drilled out to 1/8 inch, and had the inner edges polished so they move nice and smooth on the pivots. I went through a few carbide bits in the process but hopefully it will save some time. Next I need to prep some scissors springs en masse, but I am waiting for the vibratory tumbler to arrive for that. :D


-
No fish scalers?

:P
-
-
That's because he want 5 on his.
live from Nate's mobile
-
How about grinding the Fishscaler into a rescue blade (keeping the blunt tip)?
-
Ive been out of green for about 5 months and black is now surpassed red for popularity, so I did a bigger run of black this time. Now blue and red are next. I've been trying to keep on top of the situation and have colors run before I run out, but then its rather costly to have that much parts inventory, since Ideally Id love 20 sets of saks in each of the 5 colors, but thats 100 alox worth of parts! :D



-
@Syph007 said:
Ive been out of green for about 5 months and black is now surpassed red for popularity, so I did a bigger run of black this time. Now blue and red are next. I've been trying to keep on top of the situation and have colors run before I run out, but then its rather costly to have that much parts inventory, since Ideally Id love 20 sets of saks in each of the 5 colors, but thats 100 alox worth of parts! :D


WOW :o
I'm liking the green
Love your work...you've come up with a great way of putting them together to save the peening ;)
Now if only I could save up enough for an Electrician Plus Deluxe
-
So... I was running low on black alox liners for all black type mods. I made these by cutting them out of aluminum with a jewelers saw and it was a painfully laborious process which I havent been too anxious to repeat.
So... I'm trying a new option to get black liners and make use of parts I have. Since I have taken apart alot of alox SAKs and used custom liners on alot of builds, I ended up with quite a stock pile of stock nickel silver liners. Now I cant anodize those, but I can cerakote them black. This means I can get some more black liners that are already guaranteed to be the correct size since they are stock original, and I get to make use of a pile of parts.
I got a great quote for a batch of 50 liners coated in armor black, so I prepped these over the last couple of days. Holes were drilled out and polished, and I edge sanded all of them to provide a nice true surface.

And since I need that little black spacer to be black too for my all blackout builds, I just went ahead and hand rivetted them to 20 of the liners so they will be ready to go. Ive been doing this for all custom builds that have special colored liners, or ones I make from brass.


Now to pack them up and patiently wait. :D
-
@Syph007 said:
I finally had enough of hand finishing my custom springs, so I did some research and blew 300 on a heavy duty vibratory tumbler and some ceramic media. Time to experiment and figure out how to make parts look nice. I know I need burnishing fluid and water to drip in the top at a slow rate, and the tumbler has a drain, so I'll have to rig up some bucket and value system.
My vibratory tumbler was backordered ??? ... BUT.. its now on truck out for delivery! OH how I hope this makes parts finishing faster. The longest task in my current mod process is finishing the springs. It take me about an hour by hand to turn a heat treated spring covered in scale, so a shiny nice spring ready to use.

-
Nice!
It will be interesting to see how much time it will save you, hopefully a lot. -
@Etherealicer said:
Nice!
It will be interesting to see how much time it will save you, hopefully a lot.Agreed. That seems like a lot of time could be saved that way. Hope it works to your satisfaction.

-
:D

Now to experment... there are lots of variables.
- drip rate of burnishing liquid
- tumble time
- media type (although i only have ceramic type right now)
- media shape
I want to get some of the little pyramid type too, but this place didnt have any. They also sell the bowls separately, I assume so once you know what you need, you have one bowl for each media type you use.
-
Have fun Syph! :D JR
-
Just wanted to mention that I finally got all my custom examples pics up in my site gallery.
http://sakmodder.com/gallery_93mm_alox_1.shtml
This has been an easier way for people to browse and refer to specific models, than sifting through either my photobucket or my massive build thread here.
-
@Syph007 said:
Just wanted to mention that I finally got all my custom examples pics up in my site gallery.http://sakmodder.com/gallery_93mm_alox_1.shtml
This has been an easier way for people to browse and refer to specific models, than sifting through either my photobucket or my massive build thread here.
Great representation of your fine work Sir. Some wonderful photos there

-
Just wanted to mention that I finally got all my custom examples pics up in my site gallery.
http://sakmodder.com/gallery_93mm_alox_1.shtml
This has been an easier way for people to browse and refer to specific models, than sifting through either my photobucket or my massive build thread here.
Great representation of your fine work Sir. Some wonderful photos there

It took me a ridiculously long time to get all those pics organized. But Ive also been on 3yr old watching duty since my wife is working full time now. So when I cant be in the shop, I was forcing myself to work away at that. Id much rather be out grinding, cutting and polishing metal though than doing computer work. I dont have too much left to do on it now, just post of common build configurations and options.
Then if I want to re-learn javascript I want to make a design you own SAK tool and submit for quote. That would streamline the process too.
-
@Syph007 said:
Just wanted to mention that I finally got all my custom examples pics up in my site gallery.http://sakmodder.com/gallery_93mm_alox_1.shtml
This has been an easier way for people to browse and refer to specific models, than sifting through either my photobucket or my massive build thread here.
Very nice...

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login