And so it begins.... (My adventures into Alox!)
-
@Syph007 said:
I finally had enough of hand finishing my custom springs, so I did some research and blew 300 on a heavy duty vibratory tumbler and some ceramic media. Time to experiment and figure out how to make parts look nice. I know I need burnishing fluid and water to drip in the top at a slow rate, and the tumbler has a drain, so I'll have to rig up some bucket and value system.
My vibratory tumbler was backordered ??? ... BUT.. its now on truck out for delivery! OH how I hope this makes parts finishing faster. The longest task in my current mod process is finishing the springs. It take me about an hour by hand to turn a heat treated spring covered in scale, so a shiny nice spring ready to use.

-
Nice!
It will be interesting to see how much time it will save you, hopefully a lot. -
@Etherealicer said:
Nice!
It will be interesting to see how much time it will save you, hopefully a lot.Agreed. That seems like a lot of time could be saved that way. Hope it works to your satisfaction.

-
:D

Now to experment... there are lots of variables.
- drip rate of burnishing liquid
- tumble time
- media type (although i only have ceramic type right now)
- media shape
I want to get some of the little pyramid type too, but this place didnt have any. They also sell the bowls separately, I assume so once you know what you need, you have one bowl for each media type you use.
-
Have fun Syph! :D JR
-
Just wanted to mention that I finally got all my custom examples pics up in my site gallery.
This has been an easier way for people to browse and refer to specific models, than sifting through either my photobucket or my massive build thread here.
-
@Syph007 said:
Just wanted to mention that I finally got all my custom examples pics up in my site gallery.This has been an easier way for people to browse and refer to specific models, than sifting through either my photobucket or my massive build thread here.
Great representation of your fine work Sir. Some wonderful photos there :tu:
-
Just wanted to mention that I finally got all my custom examples pics up in my site gallery.
This has been an easier way for people to browse and refer to specific models, than sifting through either my photobucket or my massive build thread here.
Great representation of your fine work Sir. Some wonderful photos there :tu:
It took me a ridiculously long time to get all those pics organized. But Ive also been on 3yr old watching duty since my wife is working full time now. So when I cant be in the shop, I was forcing myself to work away at that. Id much rather be out grinding, cutting and polishing metal though than doing computer work. I dont have too much left to do on it now, just post of common build configurations and options.
Then if I want to re-learn javascript I want to make a design you own SAK tool and submit for quote. That would streamline the process too.
-
Interestingly the number of hits to the site by country, almost exactly line up with where Ive sent custom SAKs and in what order. The US and Great Britain are by far the most common places Ive sent SAKs. The only one that doesnt correspond in the list is France. I cant remember ever sending a SAK there, but I know there are a few french SAK enthusiast sites that probably view my customs.

-
@Syph007 said:
Just wanted to mention that I finally got all my custom examples pics up in my site gallery.This has been an easier way for people to browse and refer to specific models, than sifting through either my photobucket or my massive build thread here.
Way to go!
Mines got the most pics :D ! JR -
Very cool resource Syph. Good for new and old customers alike.
-
That's some great custom SAK viewing Syph. Good job organizing all that. I like the idea of the "build your own" feature and submitting for a quote

-
This one seemed straight forward but I hit a bunch of snags on the way. Pliers are harder to add than scissors since they stick up higher and can block nail nicks. In the middle this blocked other tools, and pliers on the outer layer are difficult as the plier jaw rivet sticks out and will hit the scale.
You cant tell from the pics but here are the tweaks I did to get it all to work.
- ground plier head rivet to clear scale
- ground rests of plier back spring to allow plier head to sit as low as possible
- ground rest of saw backspring to lower saw as it was too high.
- surface ground 2x opener layers springs from 0.080" to 0.055" to use as the phillips backspring
But.. It all works just fine and the pliers open and close without hitting the scale at all.







-
Nice improv work there Syph
Looks good as always. -
You are truely master. salute sir.
Sent from my HTC One X using Tapatalk
-
Really nice
I like this green HA color a lot. Definitively the color to ask for in my next custom to be done in the near future you (just need a couple of more items). -
Another beauty Syph as always!
JR -
I was playing with a 1/2 inch endmill today to see if that works for making nail nicks. I think it did a decent enough job.








-
Awesome! :ahhh
At first I saw you cutting the blade in half and was just thinking WTF is he doing. :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login