Jeep light install
-
Nice job Grant, time to start cracking on those last few things! Oh and you do know your tags up in 2012?? I don't know how they are up there? JR
-
Looks good!
Remember though, for the blinkers, you'll need to use resistors or they'll flash really fast.JR, I'm going to guess that the current sticker is on the other side of the plate, or Grant is really far behind.
:D -
That one is. :D
If you look closely at this photo you'll see there's another tag in the upper right corner:
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/2013-05-18_13-14-38_320_zps293b3688.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/2013-05-18_13-14-38_320_zps293b3688.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I probably should have put the new one over the old one, but I put it in the opposite corner for the fun of it. As long as there's a valid tag on it, it doesn't really matter where it is. :D
Good spot though!
Def
-
Jeep with no doors, one with no lights, :ahhh :ahhh Remind me to never visit there!!!

-
@Grant Lamontagne said:
That one is. :DIf you look closely at this photo you'll see there's another tag in the upper right corner:
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/2013-05-18_13-14-38_320_zps293b3688.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/2013-05-18_13-14-38_320_zps293b3688.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I probably should have put the new one over the old one, but I put it in the opposite corner for the fun of it. As long as there's a valid tag on it, it doesn't really matter where it is. :D
Good spot though!
Def
I think you meant the upper left corner since the pic before was on the right corner
. What about the one over the wheel? JR -
@Grant Lamontagne said:
That one is. :D
If you look closely at this photo you'll see there's another tag in the upper right corner:
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/2013-05-18_13-14-38_320_zps293b3688.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/2013-05-18_13-14-38_320_zps293b3688.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I probably should have put the new one over the old one, but I put it in the opposite corner for the fun of it. As long as there's a valid tag on it, it doesn't really matter where it is. :D
Good spot though!
Def
I think you meant the upper left corner since the pic before was on the right corner
. What about the one over the wheel? JRHe's Canadian JR, things are reversed up there..... :P
-
@Grant Lamontagne said:
That one is. :D
If you look closely at this photo you'll see there's another tag in the upper right corner:
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/2013-05-18_13-14-38_320_zps293b3688.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/2013-05-18_13-14-38_320_zps293b3688.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I probably should have put the new one over the old one, but I put it in the opposite corner for the fun of it. As long as there's a valid tag on it, it doesn't really matter where it is. :D
Good spot though!
Def
I think you meant the upper left corner since the pic before was on the right corner
. What about the one over the wheel? JRHe's Canadian JR, things are reversed up there..... :P
Yeah huh, duh
lol. JR -
@Grant Lamontagne said:
That one is. :D
If you look closely at this photo you'll see there's another tag in the upper right corner:
I probably should have put the new one over the old one, but I put it in the opposite corner for the fun of it. As long as there's a valid tag on it, it doesn't really matter where it is. :D
Good spot though!
Def
I think you meant the upper left corner since the pic before was on the right corner
. What about the one over the wheel? JRHe's Canadian JR, things are reversed up there..... :P
Yep, it's true. Just look at the blurb under my avatar. :D
-
@Grant Lamontagne said:
That one is. :D
If you look closely at this photo you'll see there's another tag in the upper right corner:
I probably should have put the new one over the old one, but I put it in the opposite corner for the fun of it. As long as there's a valid tag on it, it doesn't really matter where it is. :D
Good spot though!
Def
I think you meant the upper left corner since the pic before was on the right corner
. What about the one over the wheel? JRHe's Canadian JR, things are reversed up there..... :P
Yep, it's true. Just look at the blurb under my avatar. :D
Lol, wlel dwon hree wree jsut out of odree, yet can siltl udnresnatd! :) JR
-
I can't remember if I posted this or not, but this is going to be the next mod I do:
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
Basically the light on the fender (marker light) doesn't flash with the signal on the grille. This strikes me as amazingly dumb. This ten minute mod changes that and allows the marker to mimic the signal, which in my books just makes it safer. The European guys will be familiar with this as side signals have been common there for years, and I have them on my VW and think they are fantastic. I have thought of getting a set of light up wing mirrors for the Jeep but at $150/side they can keep them. This will be just as effective and cost nothing- except the small electrical clamps which I imagine won't stress my Visa too much.
When I get around to doing mine I will also swap out the incandescent bulb and orange lens for the clear lens and LED's that I got a while ago.
Def
-
I haven't done the signal light mod that I listed above, but I did get some new LEDs in today so I decided to quickly swap them out before the rain hit too badly.
Here is the original signal light:
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/20140526_121245_zpsb9a7ae16.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/20140526_121245_zpsb9a7ae16.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
The replacement LED:
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/20140526_121341_zps7ddbd5ac.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/20140526_121341_zps7ddbd5ac.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
The replacement LED lit up:
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/20140526_121406_zps1f0ba931.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/20140526_121406_zps1f0ba931.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
And a comparison shot- the LED bulb is on the right, the stock on the left. As you can see, no appreciable difference in light output.
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/20140526_121420_zps6ad6be59.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/20140526_121420_zps6ad6be59.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
You can also see Eddie in the house, fascinated by what I was doing... :D
Going back to this photo for a minute I can show you something I found a bit worrying:
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/20140526_121341_zps7ddbd5ac.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/20140526_121341_zps7ddbd5ac.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
It bothers me that the housing at the base of the bulb looks burnt. These are fairly new sockets, having been installed when I changed the front lights from orange to clear, and they are all OEM- in fact they are MOPAR and I ordered them right from Dodge, so it bothers me that they look like they were ready to melt or catch fire.
At any rate, the LED's shouldn't burn anywhere near as hot, so I shouldn't have anything to worry about now.
Def
-
Nice job!
JR -
Do you have problems with things having to be rated for road use?
I'm pretty sure most of your "modifications" would be illegal to do over here because you're using non-incandescent bulbs in holders that were only approved to have incandescents. If you want LED lighting you have to buy complete replacement E-marked units.Whether anyone would actually notice or care...
edit: oh, and if you think a slightly chared bulb holder is bad, Defenders have a habit of burning out their head light switch. It's a popular mod to add in some relays and heavy cable, the stalk turning on the relays that supply the lights. You get an extra couple of volts to each light that way too.
-
It looks like you caught this just in time. Nice work

-
Technically these should be approved by the DOT, but no one checks this.
I think these are going to have to come out though. They don't seem to be working properly.
Def
Sent from a digital multitool
-
You need a resistor to use LED bulbs for the signal lights.
-
Yeah I know, but I don't know anything about that so unless I can get a ready made solution handed to me I'm just toss them.
Def
Sent from a digital multitool
-
I can't help ya there either. :( Are they the same bulb as your reverse lights?
-
Yes, except these are amber and I need white for reverse lights. Luckily I have a ten pack of white bulbs coming as I'd planned to replace my brake lights with them too. Now I'm not so sure I want to replace my brake lights as I imagine I'll have the same problem as they double as the rear signals.
The reverse lights should be good though.
I'm sure I'll find a use for the others- maybe sell them to other guys in the Jeep club. >:D
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login