Juice Club
-
Thanks :) But the scissors feel a bit flimsyish? Is it the same with all Juice-s? Also the pliers are a bit stiff... or maybe that's because these are my first non spring-loaded ones.

It's not so big and heavy as I imagined it, though. Watching vids on YT one would say it's an enormous tool.
-
@N_N_R said:
I have my brand new Xe6!!! It arrived SOOOOOO FAST!

YAY
@N_N_R said:
Thanks :) But the scissors feel a bit flimsyish? Is it the same with all Juice-s? Also the pliers are a bit stiff... or maybe that's because these are my first non spring-loaded ones.
It's not so big and heavy as I imagined it, though. Watching vids on YT one would say it's an enormous tool.
The scissors are the same across the juice line. I found them to be pretty good. I was very surprised how "small" the juice line was as well. A 91mm SAK is longer which surprised me but in a good way. The pliers are new so they may need to be used a bit for them to loosen. Isnt the color gorgeous?
-
The colour IS gorgeous :D It's very rich and not like in most pictures. But I'm really kinda afraid for the scissors... The scissors on my PS4 aren't that shaky, they don't move from side to side. I have the feeling there's a problem/something loose where the two "blades" for the scissors are attached together (not sure about the technical terms) (pivot or sth. ?) The "blade" which actuates the very spring/ the upper blade that you move with you thumb is kinda.. moving quite freely from side to side.
P.S. I'll compare the scissors to the pair in the gray Juice S2 that's supposed to arrive soon.
-
@N_N_R said:
The colour IS gorgeous :D It's very rich and not like in most pictures. But I'm really kinda afraid for the scissors... The scissors on my PS4 aren't that shaky, they don't move from side to side. I have the feeling there's a problem/something loose where the two "blades" for the scissors are attached together (not sure about the technical terms) (pivot or sth. ?) The "blade" which actuates the very spring/ the upper blade that you move with you thumb is kinda.. moving quite freely from side to side.P.S. I'll compare the scissors to the pair in the gray Juice S2 that's supposed to arrive soon.
Just checked my S2 scissors and yes they are also "shaky" and move side to side but this doesn't affect cutting. How do yours cut?
-
And I'd just made a very short video to show the ... shakiness, lol. Here it is if you care to check, but because my camera is just as crappy, perhaps it won't be visible that much https://www.youtube.com/watch?v=IvKetVc4-3A
Not sure how much I like them.. maybe I just have to get used to them. The very cutting seems to start from about the middle of the blades while I'm used to scissors cutting from "before that" area. Maybe this results in shorter and not that refined cuts... but after all that's not real proper-size scissors. But I'll take your word for it and hope they won't fall apart :D Just, I hate the shakiness I got for the money I paid for it..
-
This is what some dislike about LM and their tools. The standards as to their build quality seems lacking. Mine came preowned and so far so good. I totally understand cost vs initial satisfaction let down. I have a new Crunch that had badly misaligned plier but I got over it even tho others have sent tools in with less issues. I'll look thru my other juice's and see if they also have scissor wobble.
-
The scissors on my S2 do the same thing, but they seem to function just fine when it comes down to it. I hope you are able to still enjoy your new purple toy NNR

-
Ok, great, thanks for telling me guys!
This makes me way more confident in the quality of my tool :D Just no key chain sized tool or my WIngman have such.... "playful" scissors, so I freaked out :ahhh -
IIRC from Lynn's scissors test, your scissors should work fine when using them right handed, but not so good using them left handed. If you use your right hand, in operation you sorta push the blades of the scissors together, making them cut. If you use your left hand, you'll push them apart, and they'll just "chew up" into anything you try to cut.
-
My little contribution to the club....
-
-
Thanks! :D Bmot also confirms that, I think... :D
-
Nice Juice NNR...liking the color!
-
Thanks! :)
Ok, the S2 will be in my hands tomorrow... :D Unfortunately, it will be gray. sigh.
I must say, though, I'm mildly disappointed by the xE6. I did want to have a juice and moreover a nice colour, but the scissors' play annoys me. Well, if that's what it is with all Juices, fine... but still. Also, when you pull up the corkscrew, it pushes up the bottle opener. Originally I thought that this was smart, as the bottle opener is used WITH the corkscrew to open bottles. So, instead of pulling out two tools with your fingernails, you pull the corkscrew, which in its turn opens the bottle opener. But...no. The corkscrew does not pull UP the whole bottle opener and instead the two of them get "stuck together". So if the corkscrew is pulled up and ready to use, the bottle opener is stuck half way up. So you still have to open first the bottle pener and then the corkscrew.
Also, the fact that, at times, when closing the tool, half of the plier head gets stuck in the handle with the flat heads and this way the tool cannot be closed is very annoying. I must always be careful how I "fold" the tool and which side goes first in the handle. Doesnt happen often, but happens. Thank God I don't use pliers often.
The tool closes very well and with a snap when you close it... "forcefully". But if, from a closed position, you just pull away the two parts on the side of the lanyard, without opening the tool, the tool doesn't close, but remains slightly apart... and I have to fold it in pressing it with my fingers.
Also, when the tool is closed, fully folded & all, and I have it my hand and squeeze it with my whole strength, something somewhere flexes.... which I don't like. I'm a woman after all and not that strong, I assume.
So, of course, it's a very pretty tool and I did want it. But for twice the money of my Wingman, I think the Wingman is closer to Leatherman quality than the Juice... Of course, I haven't even tested all the tools yet, so these are just my original impressions. And I like the versatility that it provides. And the colour and form factor. But still, there are lots of thins that drive me nuts and make me feel kinda disappointed... feeling that I didn't have with any of the key chain tools I had or the Wingman.
I hope the S2 will return my faith in the Juice line tomorrow, lol.
-
Sorry you're a bit disappointed with the XE6 :( I used to have one, but sold it. Not due to any of the problems you seem to be having, as mine was fine (maybe had the scissor play, which seems to be common anyway, but I don't remember). It just seemed like too much in a smaller sized MT, and I just didn't end up carrying it much after the newness wore off.
I hope you have a better first impression with your S2
You will have to open up the opener combo tool to deploy the scissors though, which is a little annoying, but I don't find it to be a big deal. Other than that, as long as you don't get one with the stiff and difficult to deploy drivers, you should be all set. I don't have that problem with either of my Juices (S2 and KF4), but it does seem to be fairly common to many here.My KF4 is my favorite due to its more symmetrical design, and nice size, while still providing a great tool loadout overall. However, it does lack scissors, which hurts it IMO. I would rather have the scissors in place of the serrated blade to make it a more "complete" package for me. It doesn't have the opener combo tool either, but I rarely would use that anyway.
Anyway, sorry for my rambling. I do hope the S2 works out better for you, and I look forward to your thoughts on it :)
-
Thanks :) Yeah, I do hope I'll like the S2 better. ANd yes, I realized bit later that I have to deploy the opener first and then the scissors. That's why I thought the Juice xE6 scissors would be superior.
Anyway, I can't wait for the S2

-
@N_N_R said:
Also, the fact that, at times, when closing the tool, half of the plier head gets stuck in the handle with the flat heads and this way the tool cannot be closed is very annoying. I must always be careful how I "fold" the tool and which side goes first in the handle. Doesnt happen often, but happens. Thank God I don't use pliers often.My replacement (Grey) S2 arrived. The plier closing is marginally better but I think if I forced it the jaw would slip off the driver, at which point if forced hard enough its possible it would no longer look "better".
I'm keeping the second one and returning the first one. It's being returned as "faulty" but is visually unused. Actually the driver is marked but might not be spotted if the plier was jammed first before inspection. Does somebody else get it or what? Can't be so many pre-2014 models left. Maybe that is the problem?
Fundamentally its poor design. Even poorer that LM appeared to never address the issue in all the years. Perhaps until now, look at Chako's CS4 comparison photographs and the centre driver has been extended providing a wider landing for the plier jaw. Really hate the 2014 Juice. Won't be acquiring it. If I wanted a shorter rounder knife I could grind down what I have.
I'm keeping the S2 because its genuinely UK legal EDC and the pliers are loads better than anything a SAK can deploy. I'm going to file a flat on the jaw radius at the tip. Another mitigation might be to slightly restrict the maximum jaw opening. Maybe try a dab of epoxy. At the price for the Juice range shouldn't have to work around this issue.
BTW both scissors display much less slack than shown in N_N_R's vid.
In the first picture its obvious which one is "better". The second picture shows the "better" one nose on. Its easy to see the potential problem.


-
Sorry your disappointed N_N_R :-\ I'm carrying my xe6 today,my only complaint is the tin opener ,it might grow on you as the juices have with me

-
Thanks, Zed :)
Today I got the S2, too! I must say I'm in love with it! The scissors have NO play whatsoever, they feel a lot tougher than the Xe6. The whole tool feels a lot... stiffer & tougher and stronger.
At some point, I guess, if I don't sell the Xe6, I'll just send it to LM... who knows. For the time being I'll be comparing both.
The S2 also came with a leather sheath, so I guess I could put the Xe6 in it and carry it on my belt while having the S2 in my pocket or sth. (you can never have too many LMs on you, right? :D)
-
Have to say the xe6 I've got here is the same as my s2 ,I pair the s2 with my champ in my backpack or xe6 when I want all tools :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login