Show off your Sak mod's!
-
@Sneider said:
Currently I'm experimenting a bit with the anodize of original alox scales. Here are a few of my recent work.Wow neat stuff for sure, thanks for posting!
Did you already have anodizing gear for other purpose or just set it up for SAK work? Today is my day to get my Ti anodizing gear setup, but doing Al anodizing seems more involved with nastier chemicals. You need sulfuric acid I think?
-
love that red with black.
Sent from my HTC One X using Tapatalk
-
Those look very good.

I think they deserve a separate thread so you can tell us in more detail how you made them.

:D
Thank you, Nikola!

No, I fear that large postings with lots of information drown in the flood of comments and babblings. I anodized according to the usual procedures.
1 sodium hydroxide bath to remove the old anodized layer
2 aluminum cleaning bath.
3 annodize bath (in sulfuric acid and under current)
4 dyebath
5 sealing bath (cooking)Who wants to anodize should inform themselves properly. There are many sources of information on the web. The process is complex, you have to consider many things.
-
Currently I'm experimenting a bit with the anodize of original alox scales. Here are a few of my recent work.
Wow neat stuff for sure, thanks for posting!
Did you already have anodizing gear for other purpose or just set it up for SAK work? Today is my day to get my Ti anodizing gear setup, but doing Al anodizing seems more involved with nastier chemicals. You need sulfuric acid I think?
Thank you! :) I learned specially for my passion of alox-SAK aluminum to anodized. Yes the anodizing bath works with sulfuric acid.
I wish you good results with your Ti anodizing work.

-
Currently I'm experimenting a bit with the anodize of original alox scales. Here are a few of my recent work.
Wow neat stuff for sure, thanks for posting!
Did you already have anodizing gear for other purpose or just set it up for SAK work? Today is my day to get my Ti anodizing gear setup, but doing Al anodizing seems more involved with nastier chemicals. You need sulfuric acid I think?
Thank you! :) I learned specially for my passion of alox-SAK aluminum to anodized. Yes the anodizing bath works with sulfuric acid.
I wish you good results with your Ti anodizing work.

Ya Ti anodizing is easy compared to Al anodizing. I dont have to calculate current and surface area etc. Im happy letting the professionals do the hard anodize for me on Al, but Ti anodize is very easy to do at home.
-
Wow, Peter! :o
Those look very good.

I think they deserve a separate thread so you can tell us in more detail how you made them.

:D
Thank you, Nikola!

No, I fear that large postings with lots of information drown in the flood of comments and babblings. I anodized according to the usual procedures.
1 sodium hydroxide bath to remove the old anodized layer
2 aluminum cleaning bath.
3 annodize bath (in sulfuric acid and under current)
4 dyebath
5 sealing bath (cooking)Who wants to anodize should inform themselves properly. There are many sources of information on the web. The process is complex, you have to consider many things.

Looking forward to your future mods.
And I like that you're doing it on the Solo platform. I feel it's a very unjustly unappreciated model that I personally like very much. The strongest snap, very low profile but you get that great 93mm blade.
-
Wow that Custom Anodizing is great, really!!! I'm stunned.
-
Some time ago I decided to do a custom alox knife for me!
Starting point was a used sailor:


I extended it with an opener layer, a metal saw and a scissor (I used an old scissor backspring for this mod).
I was to lazy for special liners. So you might see one original brass liner and several original alu ones. I heard a lot about the heavy work needed for custom liners. I avoided this. (Maybe in the future)
The scales are very used. As this knife will be a user, I don't care about this. (Seeing the custom anodizing above maked me think, though)
However, I talked too much. ;-)
The Result is my 'Sea Ranger'






-
HankSolon,
I really like your mod Sea Ranger. It is giving ideas for a Sailor I have.

-
84 mm Alox with Wenger scissors and back tools hidden 4th pin.



Sent from my HTC One X using Tapatalk
-
Good to see more Wenger scissors making their way into 84mm knives.Also, great job on the Phillips. It looks like it is meant to be there, and that's as good as it gets.
-
So many awesome mods here... Congrats, folks.
I'm actually tempted to do my first mod soon... Vic Recruit with the saw layer added (taken from "My First Vic Plus"), with the white scales. 84mm, three layers without any backside tools... Unique SAK

-
Yes, Glofindel, very nice incorporation of back tools into the ALOX frame. I see you added liners,for the hidden rivet, right? And to help compensate the thickness of the phillips.

Excellent looking mod, Henry.
And I'm a big fan of the Ranger in general. 
-
@enki_ck said:
Yes, Glofindel, very nice incorporation of back tools into the ALOX frame. I see you added liners,for the hidden rivet, right? And to help compensate the thickness of the phillips.
Excellent looking mod, Henry.
And I'm a big fan of the Ranger in general. 
Absolutely, I flat the top portion of Phillip to reduce the thickness and roundness of it so it has nice and look to Alox scale.
Sent from my HTC One X using Tapatalk
-
Yes, Glofindel, very nice incorporation of back tools into the ALOX frame. I see you added liners,for the hidden rivet, right? And to help compensate the thickness of the phillips.

Excellent looking mod, Henry.
And I'm a big fan of the Ranger in general. 
Absolutely, I flat the top portion of Phillip to reduce the thickness and roundness of it so it has nice and look to Alox scale.
Sent from my HTC One X using Tapatalk
I just noticed you did that and it looks very nice. The thin cadet scales are tough to work with for backtools.
-
Yes, Glofindel, very nice incorporation of back tools into the ALOX frame. I see you added liners,for the hidden rivet, right? And to help compensate the thickness of the phillips.

Excellent looking mod, Henry.
And I'm a big fan of the Ranger in general. 
Absolutely, I flat the top portion of Phillip to reduce the thickness and roundness of it so it has nice and look to Alox scale.
Sent from my HTC One X using Tapatalk
I just noticed you did that and it looks very nice. The thin cadet scales are tough to work with for backtools.
Thank you, Rob.
Sent from my HTC One X using Tapatalk
-
-
Yep, drilled the tails off the rivets, removed the saw layer and had enough length left in the rivets to peen it up again as a Pioneer.
The saw layer went into a spare Electrician I had along with swapping the elec blade for a pruner blade I had in my spares box to make a Harvester
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
