Closing Leatherman Rebar with awl out causes pliers to jam.
-
Howdy.
Just trying to figure out if this is my Rebar having a fit problem or if it's in the design.
When the awl is out on the Leatherman Rebar, if you close the pliers head and tuck it into one handle or the other, then close, it closes fine.
If you "sandwich" the handles around the pliers head, the pliers jam. Is this just my Rebar and I should contact Leatherman or is this pretty common? Google searches didn't yield me any results.
Picture #1 shows the fashion of closing that allows it to close properly. Picture #2 shows the "sandwich" effect I mentioned that causes the pliers to jam in the handle.


-
If I'm not mistaken, the "sandwich" method causes the plier heads to slide in the handle, towards the direction of the tip. So, move in, then slide forward. Picture 1 causes them to move forward, then in.
-
It is the black coating causing the jam.
I have the same issue on a different tool, I reprofiled the awl a little more and give a mirror like high polish on its back. Problem solved
-
Geez, even the Rebars can do this? I wish LM would just get their s*** together regarding their tools sticking when you close them 'wrong.'
Dem
-
@Kampfer said:
It is the black coating causing the jam.I have the same issue on a different tool, I reprofiled the awl a little more and give a mirror like high polish on its back. Problem solved
Doubt it's the black oxide. It appears the sandwich effect causes one side of the pliers to wedge between the two flat drivers.
EDIT: Just for the record, I am very happy with my Rebar and the functionality provided in the size of the package. This only occurs with the awl out, I am not exactly concerned about it hindering the use of my tool. I was just trying to figure out if this was the case on every Rebar or simply my own having a defect.

-
It appears to be the case in every Rebar.
I complicated this very problem because I rounded the square edges of the plier heads.It now has more of a tendency to wedge the plier nose between the two drivers.
If you place your thumb against the plier head,opposite the awl,then close that side first you will avoid this idiosyncrasy.


-
Thanks for answering my question toolguy.
-
I can't recreate the problem on my stainless Rebar. It closes easily no matter how I try it. I'm receiving a BO Rebar this week and will try it, but I don't see how the BO would affect anything. For you guys who are having a prob, is it your consensus that the plier head is getting stuck between the flat drivers (when the awl is deployed)? I can't recreate this even whey I try. Of course, Rebars don't have the precision of Swisstools, etc., so there may be some variance from Rebar to Rebar, causing some guys to have a prob and others not.
-
Indeed, wedging between the two flat drivers with the awl deployed is exactly what's happening. When closing it up with everything tucked away, the awl fills the gap the plier slips into. Wonder if JA has experienced this on his. He uses it enough.
-
I know for sure that this is a problem on the Juice S2 also. Its notorious for getting stuck.
-
@WildJ3 said:
Indeed, wedging between the two flat drivers with the awl deployed is exactly what's happening. When closing it up with everything tucked away, the awl fills the gap the plier slips into. Wonder if JA has experienced this on his. He uses it enough.This. The awl normally acts like a kind of "ramp" guiding the plier head over the screwdrivers. With the awl deployed, it get stuck in between the drivers.
-
I've never closed my LM's (any of them) that way as you mentioned where it jams. Just tried to do it that way (felt un-natural to me) and it did jam when I did it slowly.
Good thing I don't close my LM like that as I'm sure there are many others that probably don't, hence why this "jamming" is not commonly known.
-
I just tried it with one of my stainless Rebars and could not produce the problem.
-
When I pull out and extend the awl, the Rebar is still stiff (been opening/closing it to break it in to loosen/smooth up the action) and sandwiching is what naturally happens when I close it up, due to stiffness and then the jam occurs. Again, it's only with the awl extended.
I really don't see this being worth a return to Leatherman. I'd probably get it back with an "in-spec" note. Wonder why it appears to only be the Black Oxide though. Weird.
Still love my Rebar. I don't see myself sending it in over this as I've already grown attached to it being in my pocket and wouldn't want to be without it for that long.
I didn't feel the same attachment to my Wave when I sent it in.
-
So I forwarded this thread onto Leatherman Tool Group and called them this morning. They were extremely helpful.
They did not have a black Rebar to test in their inventory, but an employee did happen to have a black oxide Rebar in their pocket and couldn't reproduce the issue.
They were genuinely concerned and interested in making it right. They want my specific Rebar back to test out, check for QC, tolerances, etc.
They are ordering a black oxide Rebar, checking to make sure it does not have the jamming issue and sending me a paid return shipping label to do a swapout.
If that's not customer service, I seriously don't know what is. Not that I ever planned to stray from Leatherman, but they just sealed the deal in having a customer for life out of me.
Those with the BO version and having the same issues, I suggest you call them and let them know so they can check out your Rebar as well. They truly cared about making it right.
I <3 Leatherman Tool Group.
-
It has nothing to do with the coating.This issue appears in those Rebars that close the pliers,on the awl side,first.If your Rebar closes the opposite side [phillips driver] first you will not experience this issue.Try it.
Below is a sequence of pics that will illustrate this issue,hopefully.
If you look inside the handles of the Wave you will witness a post attached to the bottom of the handle which extends into the tool bay.This post is designed to prevent this very issue of the "jamming pliers".As the plier head closes into the handle it ride on top of this post and then rides above the folded tools before it finally seats into its closed position.
The first sequence shows the pliers closing into the handle on the phillips side first.Then closing into the awl side and finally almost closed and no tool jamming.



-
This sequence shows the tool closing on the awl side in the first pic.
'The second pic show the pliers jammed between the two divers with the awl extended.


-
These pics show the post placed inside the handles of the Wave,to preclude the issue of the pliers jamming between two other tools.
The post is placed just above the rivet.


-
Nailed it.
Spot on toolguy. Just got off the phone with Shelly again (really nice people). Something tells me a slight design modification might be in the future for the Rebar.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login