Jeep light install
-
Well that sucks! JR
-
I did some research on the resistors and found they are pretty cheap and easy enough to install that even me, with my nonexistent electronical skills could manage. I just ordered ten of these:
I figure I will need four of them (2x front, 2x rear) and I imagine my boss will require a set as well since I also got him some LED signal replacements too.
And, two extra to drop the price and in case I screw up a bit. :D
Def
-
You don't actually need the resistors, though it is one way to solve the problem.
The better way to solve it is to get a better flasher unit that can cope with the LED indicator lights.
One of the big advantage of LEDs is their reduced power consumption and putting in the resistors negates that.The other thing to bear in mind is that it shouldn't matter where you put the resistors because all the lights on one side are in parallel, so you could put all the resistors together in a a convenient location, whether that's by a light or not.
-
I was wondering about that. I figured the resistors just signed as much power as the incandescent bulb but converted it to heat.
That's annoying. Still, at least I won't have to worry about following blown bulbs.
Def
Sent from a digital multitool
-
The LED fogs I put in before were cheap hunks of smurf and kind of crapped out on me, so I decided to invest in some better ones. I hope they last a lot better than the first set.

The old set was about $7 on ebay and these new ones were about $50, so I'm hoping that translates into a better quality bulb. Either that or I got taken. :ahhh
Here is a comparison of the old and new bulb.
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/20140723_191309_zpsdgsbk7yx.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/20140723_191309_zpsdgsbk7yx.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
And a comparison of them lit up- on the left is the new one, on the right is the old one.
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/20140723_191422_zpsyqr4recs.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/20140723_191422_zpsyqr4recs.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
And here are some better shots of the new and old ones:
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/20140723_191507_zpsyltoszxb.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/20140723_191507_zpsyltoszxb.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/20140723_191511_zpswbn76b8o.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/20140723_191511_zpswbn76b8o.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/20140723_191518_zpsclwxvafn.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/20140723_191518_zpsclwxvafn.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/20140723_191520_zpsqejp4sjl.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/20140723_191520_zpsqejp4sjl.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
And here is the pair of them now installed.
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/20140723_191844_zpszpx3s0ym.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/20140723_191844_zpszpx3s0ym.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Let's hope these last better than the old ones. When I took out the old ones, the individual LED chips were falling off the frame.

Def
-
Well I guess we'll just have to wait till the sun goes down,, JR
-
In case anyone is wondering where all that mud on the Jeep came from, here are a few photos from the quick trail ride we did the other night.
Jeff's Jeep:
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/20140721_191010_zpshabn1vws.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/20140721_191010_zpshabn1vws.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Mine:
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/20140721_191403_zpsl84xkltu.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/20140721_191403_zpsl84xkltu.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
A couple of bullfrogs in the mud hole:
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/20140721_192339_zpsnyscusxo.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/20140721_192339_zpsnyscusxo.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/20140721_192401_zpsxxbsgtta.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/20140721_192401_zpsxxbsgtta.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Jeff's son managed to catch one:
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/20140721_192737_zpsj8cs0f51.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/20140721_192737_zpsj8cs0f51.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
It was a good time! :D
Def
-
@Grant Lamontagne said:
The LED fogs I put in before were cheap hunks of smurf and kind of crapped out on me, so I decided to invest in some better ones. I hope they last a lot better than the first set.
The old set was about $7 on ebay and these new ones were about $50, so I'm hoping that translates into a better quality bulb. Either that or I got taken. :ahhh
Here is a comparison of the old and new bulb.
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/20140723_191309_zpsdgsbk7yx.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/20140723_191309_zpsdgsbk7yx.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
And a comparison of them lit up- on the left is the new one, on the right is the old one.
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/20140723_191422_zpsyqr4recs.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/20140723_191422_zpsyqr4recs.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
And here are some better shots of the new and old ones:
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/20140723_191507_zpsyltoszxb.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/20140723_191507_zpsyltoszxb.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/20140723_191511_zpswbn76b8o.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/20140723_191511_zpswbn76b8o.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/20140723_191518_zpsclwxvafn.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/20140723_191518_zpsclwxvafn.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/20140723_191520_zpsqejp4sjl.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/20140723_191520_zpsqejp4sjl.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
And here is the pair of them now installed.
<a href="http://s253.photobucket.com/user/Multitooldotorg/media/Personal/Jeepin/LED Light install/20140723_191844_zpszpx3s0ym.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://gallery.multitool.org/pbmirror/Personal/Jeepin/LED Light install/20140723_191844_zpszpx3s0ym.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Let's hope these last better than the old ones. When I took out the old ones, the individual LED chips were falling off the frame.

Def
The seal on the old ones looks a bit dodgy... perhaps humidity getting in there? I hope you cleaned a bit before installing the new ones? might be worth looking at that it's properly sealed this time.
-
Hey Geoff did you install HIDs in your main headlights? Or are they the ones mounted by the windscreen?
I'm thinking about installing HIDs into my faculty housing on the hilux (somehow. It seems like a faff) and sticking a pair of HID spotlights linked up to the high beams too.
-
@Grant Lamontagne said:
The LED fogs I put in before were cheap hunks of smurf and kind of crapped out on me, so I decided to invest in some better ones. I hope they last a lot better than the first set.
The old set was about $7 on ebay and these new ones were about $50, so I'm hoping that translates into a better quality bulb. Either that or I got taken. :ahhh
Def
I was wondering what the beam pattern was like with the new LEDs ?
For fog lights to work properly they need a very low, flat beam that goes out only below horizontal so the glare reflected from the water droplets that make up fog aren't dazzling you (and other drivers). The light emitted by LED "globes" is often quite different from regular filament globes, and unless the LEDs, reflector and lens are all designed to work together the results can be worse than well designed regular filament globes.
-
So far they seem fine. Oddly enough we haven't had a lot of fog lately to try them properly.
Def
Sent from a digital multitool
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login