First time Mod
-
Holy smurf! that's some very impressive work :ahhh
-
Excellent work.
I personally don't like skeletonized scales as they present many problems but they do look cool.
-
-
@hiraethus said:
So many questions! What's the tool life like - how many parts could you get out of it? How accurate and stable is the finished part, and what are the mechanical properties? Did you do the machining (CNC I assume) yourself?This is quite a basic tool, so I would think I could get 100 shots out of it easily.
The finished part is VERY accurate, I did not in this case but you can take material shrinkage into account by altering the mold, the amount of shrinkage is dependant on the material being molded.
Yep, I did the CAD, CAM and CNC Machining myself. I am not a fitter and turner or dedicated machinist, I have a degree in Mechanical Engineering and work as a "Product Development Engineer" but luckily my employer trains and encourages us to do the practical work as well as design.
When bent by themselves, the scales do flex a bit more than the standard alox scales. The material itself is very stiff, the stiffest I have seen for a polymer/plastic. As an example, the Spru you can see in the last photo I posted (propping up the pair of scales) is un-breakable by hand.
-
You should change the design however and use button head screws for the 84mm range (thus use almost no countersinking). The reason behind this (as already stated) is to allow the pivots to extend into the scales as much as possible. The holes in the scales define the position and correct alignment of the pivots/pins which directly affects the tension of the springs and thus the snap of the tools.
The tension between the scales is by far the hardest thing to get right. I even think it's easier to get the correct amount when peening instead of using threaded pivots with screws.
Yeah I'm thinking this is my main issue. I like the countersunk screw heads, the head is slightly larger than the the pivots so I could easily drill out the scales to allow the pivot to extend further into them, and I think there would still be enough contact with the head to hold it all together.
Current hole geometry.

I just need to figure out a clean and accurate method to cut the pivots down. Any suggestions?! The lathes we have are all too large, and the jaws will not grip such a small object. I may try and make a jig to clamp them in the manual mill.
-
@toolguy said:
Excellent work.I personally don't like skeletonized scales as they present many problems but they do look cool.
Thanks.
Problems due to stiffness? In their current state I'm not convinced that this is the issue in my case. Also, if I make these scales slightly thicker, they will be just as stiff as the standard Alox scales. That may be something I look into down the track!
-
Thanks jerm. Loving your work.

@Jerm said:
I just need to figure out a clean and accurate method to cut the pivots down. Any suggestions?! The lathes we have are all too large, and the jaws will not grip such a small object. I may try and make a jig to clamp them in the manual mill.I use a collet chuck on the lathe we have here to hole the bar stock when making the pins - do you have one for any of your tools? Other option would be to hold the pin in the jaws of a drill press or mill and bring it down onto a file to remove the end.
-
Welcome to MTO and envious

-
I ended up finding a small collet chuck and matching collet to suit the 1/8" pivots. I used a V-block to clamp the collet chuck vertically in the manual mill. I then used an end mill to machine to the pivots down to 6.5mm.
I then used my 1/8" drill to drill out the scales, from the geometry shown above, to this new shape...

I find these things quite tricky to assemble but I got there in the end and the knife now works perfectly! :sak:
Added some thread-locking fluid to the screws to make sure they stay in place.
Thanks to everyone on here who offered comments/suggestions!
-
@Jerm said:
I ended up finding a small collet chuck and matching collet to suit the 1/8" pivots. I used a V-block to clamp the collet chuck vertically in the manual mill. I then used an end mill to machine to the pivots down to 6.5mm.I then used my 1/8" drill to drill out the scales, from the geometry shown above, to this new shape...

I find these things quite tricky to assemble but I got there in the end and the knife now works perfectly! :sak:
Added some thread-locking fluid to the screws to make sure they stay in place.
Thanks to everyone on here who offered comments/suggestions!
I'm glad you got it figured out, now we need more pics
:D -
WOW!
Great work and welcome to the forum!Did you buy the barrels and screws from the website posted in syph007's mod thread?
-
@DazMechanical said:
WOW!
Great work and welcome to the forum!Did you buy the barrels and screws from the website posted in syph007's mod thread?
Thanks!
Yes I did. They took quite a while to get to my part of the world, but worked well in the end.
More pics to come!
-
WOW!
Great work and welcome to the forum!Did you buy the barrels and screws from the website posted in syph007's mod thread?
Thanks!
Yes I did. They took quite a while to get to my part of the world, but worked well in the end.
More pics to come!
Cool, I'm in Australia, guessing your in NZ? I've thought about getting the same barrels and screws but wasn't sure if they would ship here. I might have to give it a go.
Can't wait for more pics! :D
-
Amazing !

Those scales are indeed

-
WOW!
Great work and welcome to the forum!Did you buy the barrels and screws from the website posted in syph007's mod thread?
Thanks!
Yes I did. They took quite a while to get to my part of the world, but worked well in the end.
More pics to come!
Cool, I'm in Australia, guessing your in NZ? I've thought about getting the same barrels and screws but wasn't sure if they would ship here. I might have to give it a go.
Can't wait for more pics! :D
Yep im in NZ.
OK, so I have a few spare sets of these scales. Who wants some?!
Would prefer to give to anyone with a bit of experience with pivot style customs knives, so I can get some feedback on the design.
I'm willing to package and post them, recipients may or may not have to pay for shipping, depending on what it ends up costing.
-
Oh man I'd love to get a set of these scales!

PM sent.
-
WOW!
Great work and welcome to the forum!Did you buy the barrels and screws from the website posted in syph007's mod thread?
Thanks!
Yes I did. They took quite a while to get to my part of the world, but worked well in the end.
More pics to come!
Cool, I'm in Australia, guessing your in NZ? I've thought about getting the same barrels and screws but wasn't sure if they would ship here. I might have to give it a go.
Can't wait for more pics! :D
Yep im in NZ.
OK, so I have a few spare sets of these scales. Who wants some?!
Would prefer to give to anyone with a bit of experience with pivot style customs knives, so I can get some feedback on the design.
I'm willing to package and post them, recipients may or may not have to pay for shipping, depending on what it ends up costing.
Very generous offer!
I don´t know how many spare sets you have, but let me suggest the following:
We do have a bunch of experienced modders around, if you wish some professional feedback, I´d send an example to:
Syph007, PTRSAK, RickinFL, Crackout, Hanksolon, Metropolicity ...
I don´t want to step on anyones toes and I´m aware the list is probably not complete.But all those I mentioned are experienced modders and I could imagine they would like to have a go at those scales and show us some nice mods and share their experiences with you and the crowd.
Syph007 has probably done the most screw/pivot based SAK mods around here and knows about the difficulties of the 84 mm chassis.
The others are making less mods, but do high quality work nonetheless. Metro, while not modding SAKs on a regular basis, is an experienced modder, a product designer and has hexperience in 3D modelling and prototyping. and he mentioned he´d like to try a SAK mod some time ago. -
Ya I gave up on the 84 size mods, just not my thing I find the frame to limiting, and all my secondary produced parts like liners etc are all on the 93mm size. I think its part OCD too, I dont like the non symmetrical design. Ironically I do like the cellidor 84s, the small tinker is a favorite of mine.. so what do I know. :D
I will add though that if anyone needs a set of pivots and doesn't want to pay the expensive knifekits shipping for a few parts ( I think its $30 for international ) I can sell you a set of pivots and screws, and international shipping I can do for $6. I buy them 200 at a time so I have quite a few on hand usually and can save you some money on shipping.
Cheers
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


