Recommend me a multi tool
-
Ok. So I think it's going to be between the OHT and the ST300 . What cons do you guys see for each of these?
Sent from Galaxy S4
-
The oht few tools
the st300s tools are much harder to open compared to the oht
-
Any other opinions that the ST300 is hard to open tools?
Sent from Galaxy S4
-
My ST300 is a bit tight. I really prefer the wave though(especially since I modded mine). My ST300 sits in my fire gear. Should be noted though, that after some use the tool breaks in and will be easier to open tools. I can't remember if the tools clump on the ST300?? Which for you would be nice with no nails.
Josh
-
My main issue with the ST300 (and the Rebar) is that the tool has to be opened to get to anything at all.
-
@av8r1 said:
My main issue with the ST300 (and the Rebar) is that the tool has to be opened to get to anything at all.How about a Bear and Son?
-
Hi Bigwilly!
Nice one mate,you've stopped everyone from the Victorinox mafia in their tracks

You'll need a bit of fingernail for a Wave. Try a Gerber Diesel or a MP600. The tools are a bit stubby,but you can get your whole finger into the chassis. Oh,and the MP600 is the AK47 of multitools!
-
</topic/40414
-
@kirk13 said:
You'll need a bit of fingernail for a Wave. Try a Gerber Diesel or a MP600. The tools are a bit stubby,but you can get your whole finger into the chassis. Oh,and the MP600 is the AK47 of multitools!This. The MP600 is a tank. I've used the hell out of mine with no issues at all. My fingernails tend to be on the short/nonexistent side at times and I've never had an issue getting the tools out of a 400 or 600.

-
-
Get a SuperTool 300 and use the needle-point pliers for opening up the tools of your sexy, epic Victorinox Spirit.
-
You can pretty much pinch the tools out on a Spirit :)
-
Tension on leathermans tools varies. Some are stiff from pacgage, some are loose. But all of them comes looser after some use.
-
I have a tiny Albainox multi lying around… if you flip it from a handle all the tools will pop out themselves :P
-
Stop biting your nails

-
Main cons with the OHT is the lack of a large flathead that you can use as a pry tool, the lack of tools in general given the physical size of the tool and less bite with the pliers as they are quite a bit small than those on the ST300.
The main con with the ST300 is specific to your predicament. It is allot harder to access the tools, and for me, the fact that it's difficult (not impossible) to open one handed. -
I know I need to but have done it all my life.
Hmmm.... a tool for a multi tool... I think you guus might be on to something. Lol. -
If you went with the wave, you could have an excuse to buy a rebar... To swap the plier heads around and awl in.

-
Bigwilly,
Welcome to MT.O! :D
I think you are well on your way to get a ST300/OHT, personally I think the ST300 is more robust and I like its construction better. However, LM tools tigthness varies, and some of them came so tight that they are real nail pullers. Good thing is most will be loosen in time or can be adjusted via the pivots.
And being a fan of Vic Spirit, I don't think I am the best person to give comparison, but you won't know what you are missing until buttery opening a Vic spirit tool. >:D ;)
-
IMHO you can't go past a SOG for buttery opening. So buttery in fact I have to chase it with a Lipitor. But you will never get those smurfing tools out in a hurry.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login