Recommend me a multi tool
-
</topic/40414
-
@kirk13 said:
You'll need a bit of fingernail for a Wave. Try a Gerber Diesel or a MP600. The tools are a bit stubby,but you can get your whole finger into the chassis. Oh,and the MP600 is the AK47 of multitools!This. The MP600 is a tank. I've used the hell out of mine with no issues at all. My fingernails tend to be on the short/nonexistent side at times and I've never had an issue getting the tools out of a 400 or 600.

-
-
Get a SuperTool 300 and use the needle-point pliers for opening up the tools of your sexy, epic Victorinox Spirit.
-
You can pretty much pinch the tools out on a Spirit :)
-
Tension on leathermans tools varies. Some are stiff from pacgage, some are loose. But all of them comes looser after some use.
-
I have a tiny Albainox multi lying around… if you flip it from a handle all the tools will pop out themselves :P
-
Stop biting your nails

-
Main cons with the OHT is the lack of a large flathead that you can use as a pry tool, the lack of tools in general given the physical size of the tool and less bite with the pliers as they are quite a bit small than those on the ST300.
The main con with the ST300 is specific to your predicament. It is allot harder to access the tools, and for me, the fact that it's difficult (not impossible) to open one handed. -
I know I need to but have done it all my life.
Hmmm.... a tool for a multi tool... I think you guus might be on to something. Lol. -
If you went with the wave, you could have an excuse to buy a rebar... To swap the plier heads around and awl in.

-
Bigwilly,
Welcome to MT.O! :D
I think you are well on your way to get a ST300/OHT, personally I think the ST300 is more robust and I like its construction better. However, LM tools tigthness varies, and some of them came so tight that they are real nail pullers. Good thing is most will be loosen in time or can be adjusted via the pivots.
And being a fan of Vic Spirit, I don't think I am the best person to give comparison, but you won't know what you are missing until buttery opening a Vic spirit tool. >:D ;)
-
IMHO you can't go past a SOG for buttery opening. So buttery in fact I have to chase it with a Lipitor. But you will never get those smurfing tools out in a hurry.
-
I used to like SOG before an incident which I will not repeat again in this thread. The opening of the tool was the smoothest I've ever seen (with its compound leverage gears). Don't buy a SOG though, their tools are poorly designed and scissors are the worst.
-
-
I couldn't recommend a SOG over a LM. Is there a store that you can go to, to try out different MT's?
-
@derekmac said:
I couldn't recommend a SOG over a LM. Is there a store that you can go to, to try out different MT's?Only 2 come to mind are Walmart and Dick's Sporting Goods. Though I'm not sure if Dick's still has them for display at the glass counter.
Walmart lets you inspect the tool before you buy it but their prices are a little high.
Gander Mtn only has them in clam packages and Sears offers them in clams also. The last time I bought some LM's at Sears I had to get the salesman to open the lock where they were hanging. I can't believe it they don't even trust you to handle a smurfing clam package

-
@pfrsantos said:
Get some nail polish and mix it with hot sauce.That doesn't work. You just end up needing to put hot sauce on everything.

-
@Lynn LeFey said:
@pfrsantos said:
Get some nail polish and mix it with hot sauce.That doesn't work. You just end up needing to put hot sauce on everything.

Mmmmmm, hot sauce!!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
