And so it begins.... (My adventures into Alox!)
-
@archerwin said:
What are the hardware needed to use the screws method? Can I use screws (or nuts & bolts) for cellidor mods? What are the sizes needed?Thanks
I believe he uses screws that are slightly bigger than standard holes, so he drills out all the parts to the right size, using carbide drills, as the steel is very hard. IIRC, the screws can be bought from knifekits.com or something like that...
For cellidor mods, I assume you can, but pivot sizes are different, and I don't think you'd still be able to use the "click on" way of attaching scales, as those use the bushings around the brass pins.
-
@archerwin said:
What are the hardware needed to use the screws method? Can I use screws (or nuts & bolts) for cellidor mods? What are the sizes needed?Thanks
You need pivot barrel. Yes, screws are fine but it won't give you flat surface. Have a look earlier post on this thread.
There is a link for it.Sent from my HTC One X using Tapatalk
-
Just a couple of updates. I dropped off the brass for waterjet last week, so it's due back next week. Im keeping my fingers crossed for 100 perfectly cut brass liners. :D If those work out well I am going to run that file again get get 200 Al liners, and have those anodized so I'll be well stocked on all options for liner action.
And Im restocked on red hard anodized scales for those have have been waiting.

The red turned out really nice.
Cheers, and I'll have some more exciting updates later this week. Hint Ti, urban pioneer, and anodizing... x2. :D
-
I was really trying to get a Ti urban pioneer (Ti-oneer ?) together today, but all I got done were scales and liners.
This is all grade 5 Ti-6-4. The liners and keyring I hand finished but they were originally waterjet quite some time ago. I anodized them blue. The scales were taken to a 400 grit finish, then tumbled in ceramic pyramids for a matte gray look.
I'm not done experimenting with scale finishes yet. I got in some steel shot that I was going to try tumbling the scales in. That in theory should work harden the surface.
I see why so many people like to play with Ti anodizing. Pretty straight forward, not messy or dangerous, and you get some neat colors.
-
Looking great
-
Oh wow Syph, that gray and blue combo is beautiful!
JR -
I think I need to hit Syph up for a set of brass liners and some blue scales for my Urban Mechanic. Baby needs a new pair of shoes.
-
I thought I already posted all the final build pics here of the Ti build, but I must not have.
Even with the tumbled finish carbidizing the wear points is still necessary.











-
Oh wow Syph, she's a beauty! I must say a real beauty!
JR -
Don't mind the puddle of drool in the corner, it's just me.
-
-
I don't know what enough means... :D
-
I would say it's a beauty Syph, but apparently I said it a dozen times in the "latest SAK" thread, thanks to my phone

-
-
Mhmhm all those nice custom made scales. Ever thought about making thicker custom scales for 84mm so the 'pivot in scale' problem disappears? There, I'm on the 84-train again. :D
-
Lovely. How does using Ti affect the weight of the knife? I assume the scales are heavier but the liners are lighter?
-
@hiraethus said:
Lovely. How does using Ti affect the weight of the knife? I assume the scales are heavier but the liners are lighter?It shouldn't add much at all really. The density of Ti isnt that much more vs Al. Now if you do brass or steel in this size, the weight is very noticeable.
Al (6061) - 2.7 g/cc
Ti-6-4 - 4.4 g/cc
Stainless Steel (440) - 7.6 g/cc
Brass (c260) - 8.5 g/cc@crackout said:
Mhmhm all those nice custom made scales. Ever thought about making thicker custom scales for 84mm so the 'pivot in scale' problem disappears? There, I'm on the 84-train again. :DYep you are right it would work better if I used thicker scales, but the problem is I really dont care for the platform. Aesthetically I prefer the symmetrical look of the 93mm size as well as I can fit just about any tool on them. Putting any of 91mm tools on 84s is possible, but such a pain compared to the 93mm size.
So I will just stick to 93 and 58 modding. 111mm is next though for sure.
-
Hmmm, that matte finish truly sparkles, very pretty

-
Oh boy this worked out nice, check out anodized Ti screws! :D
The screws are shallow socket heads from knifekits. 2 bucks a piece isnt cheap though... $12 in screws per sak. :o
http://www.knifekits.com/vcom/product_info.php?cPath=60_81_230&products_id=4723
I drilled and tapped a scrap piece of Ti for a holder.





Next Im going to make Ti backsprings and color those. :D I've been meaning to do that for a long time.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login