And so it begins.... (My adventures into Alox!)
-
Don't mind the puddle of drool in the corner, it's just me.
-
-
I don't know what enough means... :D
-
I would say it's a beauty Syph, but apparently I said it a dozen times in the "latest SAK" thread, thanks to my phone

-
-
Mhmhm all those nice custom made scales. Ever thought about making thicker custom scales for 84mm so the 'pivot in scale' problem disappears? There, I'm on the 84-train again. :D
-
Lovely. How does using Ti affect the weight of the knife? I assume the scales are heavier but the liners are lighter?
-
@hiraethus said:
Lovely. How does using Ti affect the weight of the knife? I assume the scales are heavier but the liners are lighter?It shouldn't add much at all really. The density of Ti isnt that much more vs Al. Now if you do brass or steel in this size, the weight is very noticeable.
Al (6061) - 2.7 g/cc
Ti-6-4 - 4.4 g/cc
Stainless Steel (440) - 7.6 g/cc
Brass (c260) - 8.5 g/cc@crackout said:
Mhmhm all those nice custom made scales. Ever thought about making thicker custom scales for 84mm so the 'pivot in scale' problem disappears? There, I'm on the 84-train again. :DYep you are right it would work better if I used thicker scales, but the problem is I really dont care for the platform. Aesthetically I prefer the symmetrical look of the 93mm size as well as I can fit just about any tool on them. Putting any of 91mm tools on 84s is possible, but such a pain compared to the 93mm size.
So I will just stick to 93 and 58 modding. 111mm is next though for sure.
-
Hmmm, that matte finish truly sparkles, very pretty

-
Oh boy this worked out nice, check out anodized Ti screws! :D
The screws are shallow socket heads from knifekits. 2 bucks a piece isnt cheap though... $12 in screws per sak. :o
http://www.knifekits.com/vcom/product_info.php?cPath=60_81_230&products_id=4723
I drilled and tapped a scrap piece of Ti for a holder.





Next Im going to make Ti backsprings and color those. :D I've been meaning to do that for a long time.
-
Sweet! Can't wait for a finished project!! JR
-
Syph, your level of customization is tripping all scales lately.

-
Blue ano screw is wicked!.
-
Ok so I'm continuing on with the Ti experimenting. I set out to make a Ti backspring this morning. Ti alloys are extremely hard to work with so all I've got so far is this.
Normally I cut 0.032" Ti to make liner parts and this hunk is 0.155" thick.
I'm really not too sure how well this will work, but Ive been wanting to try forever so I'm making a blade layer spring as the first test. I figure I'll anodize it, then just build a 1 layer test SAK. Open and close it a few thousand times and see how the spring holds up.
The worry I have is that Ti alloy does work harden, but I dont know if the small flex the spring will have will be enough to cause that. If it work hardens that would mean the spring would get stiffer over time unlike steel that weakens over time.
So... It's got me curious enough to find out. Ive heard of guys using 0.050" Ti for lock back backsprings, but never heard of anyone using it in a slipjoint.
-
Very interesting. Looking forward to hear the answer. :)
-
I've used Ti sheet for a linerlock and it's still going as good as the day it was made. Not that there is any number of thousand cycles on it... hundreds maybe.
-
@PTRSAK said:
I've used Ti sheet for a linerlock and it's still going as good as the day it was made. Not that there is any number of thousand cycles on it... hundreds maybe.I think it should work. Most of the info I found by googling was just speculation on slipjoint use. I couldnt find any info on anyone who actually tried it.
I figure I might have to adjust the thickness though of the arms of the spring. I have a feeling if I copy the exact profile of the stock spring that it will be on the stiff side.
-
I got a second Ti custom together yesterday. :D Identical except the liners are more purple than blue.




-
Ooooo purple.... :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login