Everything You Ever Wanted to Know About MTO (But Were Afraid To Ask!)
-
Hey Grant,
What do you carry regularly? I don't think I've ever seen any comments from you regarding your carry or favorite MTs/SAKs
Do you have several in a rotation, or just whatever suits your fancy each day? -
Mint Chocolate Chip ::) :D
Owe and :ahhh :ahhh :ahhh !!!MINI!!! :ahhh :ahhh :ahhh

Couldn't resist a ask a question thread without the above reference
-
@Monrogue said:
Hey Grant,
What do you carry regularly? I don't think I've ever seen any comments from you regarding your carry or favorite MTs/SAKs
Do you have several in a rotation, or just whatever suits your fancy each day?I've done a few "work vest dumps" in the past, but the one tool that gets more pocket time and use than anything else is my yellow scaled Victorinox Compact. That and my Wenger Swiss Clipper see the majority of mileage. Here's a pic of my SHOT 2012 EDC:

The multitool changes up fairly consistently as I like to actually use them for a while before writing a review. I have a job that really abuses tools, so I get an idea of what is going to work and what won't pretty quick. Anything that is likely to fall by the wayside probably will in short order- I refer you to my experiences with the Wingman.
Def
-
Thanks for the reply Grant
Looking back at my question, I realized that it wasn't really one pertaining to MTO itself, but rather one about you. I was curious though ;) The Compact is a good SAK indeed, and probably all I really need if I wanted to go the minimalist route. That's not my way currently though 
-
That Charge is sooooo

-
Any question I can answer I will!
And yes that Charge is indeed awesome. I carried it quite a bit too, and the coating is so tough it never got a scratch.
Def
Sent from a digital multitool
-
@Grant Lamontagne said:
Any question I can answer I will!
And yes that Charge is indeed awesome. I carried it quite a bit too, and the coating is so tough it never got a scratch.
Def
Sent from a digital multitool
What's the square root of "2"
JRthat is SO irrational!

-
@Grant Lamontagne said:
Any question I can answer I will!
And yes that Charge is indeed awesome. I carried it quite a bit too, and the coating is so tough it never got a scratch.
Def
Sent from a digital multitool
What's the square root of "2"
JRthat is SO irrational!

what? I'm still trying to figure that out after over 20yrs, fig he might know,, lol. JR -
Best Multitool experience?
Worst?
Most disappointing? -
Some good stories for that, but they will have to wait till I get back to a keyboard. Way too much for a tablet!
Def
Sent from a digital multitool
-
I bet the Wingman is one of the worst/most disappointing based on the link he posted...
-
Boxers or Briefs..........?
Oh wait this is supposed to be about tools right. :D
Leather Sheaths or Nylon. ;)
-
In the past 8 years I'd like to know if you were asked to sell MTo, to maybe a tool manufacturer?
-
-
What's your favourite MT.O branded MT?
-
@Yadda said:
Best Multitool experience?
Worst?
Most disappointing?Best multitool experience huh? There's been quite a few good ones out there, but I think if I had to choose one tool I was most pleased with, I'd have to say I keep coming back to the Spirit series. The Spirit was the most anticipated tool when it was released and it didn't disappoint. It proved that tools could be elegant and beautiful while still being tough as nails and well equipped, and to this day if I had to choose one forever, that would probably be the one.
It gets funnier though, as I remember many discussions where people talked about how much they hated the peanut butter blade and wanted a drop point like on most SAKs. I don't mind the peanut butter blade, but I could understand the desire to have something more traditional. So, Victorinox answered by releasing the S version which had the drop point, but got rid of the scissors instead of the peanut butter blade! :ahhh We all thought they were drinking a bit too much in the Alps....
Finally they released the X version, which was set up just the way everyone wanted and, to quote Monty Python, there was much rejoicing. Hooray.
The worst (and I won't say who) is when small designers come up with a project and they send it to me for evaluation. Some of them are just horrible. I could name a few, but I'd rather not as these guys have worked hard on their ideas and I really would rather encourage them to keep trying rather than shoot them down. Instead I'd like to say that there is absolutely an art to making a decent multitool, one piece or otherwise. Some of these designs for the sake of a design are just not worth the cheap pot metal they are stamped from. It bothers me that guys have put a lot of effort into producing these awful tools and are so proud of them despite them being complete and utter crap. I don't want to review them because I don't want to say anything bad about something someone has put that much of their effort into, but by the same token I run a website dedicated to providing honest reviews so that people don't waste money on crap tools. It's a real conundrum.
Also, I hate bandwagon jumpers and people who doesn't understand costs. We've had a few that fell into the above category that cranked out a half assed hunk of water jet cut steel and tried to charge Atwood type money (second hand Atwood type money, which is significantly higher than buying them from Peter) for their junk. Peter makes some beautiful stuff. It is art, but it's also functional art. The man has real talent. Taking off cut hunks of steel or titanium and carving one end into a phillips like screwdriver doesn't make a good tool.
In all, there is a serious art to making a tool- you really can't just take an every day item like pliers, a lighter or an iPhone, attach a folding blade and a bottle opener and just expect the money truck to stop at your house.
There is one particular manufacturer (I won't mention his name either as I wish nothing but the best for him) who used a generic multitool handle design and stuck a bunch of parts into the handle. Good enough I suppose, but when you look at something like the SwissTool or the PST you see how the placement of each tool is crafted to fit into place, and how in many cases the tool is specifically designed to fit in that slot, occasionally around another one. Look at the handle cutouts in something like the Rebar, the Micra or the MP600ST. These are tools and features that someone thought about and put effort into figuring out how to put the most function into a tool and make it as small as possible.
These are what disappoint me the most. I could list one or two of them as examples, but then I'd be giving some of the rest some credit, which many of them don't deserve.
Bottom line- If you are going to go to the effort of designing a tool, think about what you are doing. Don't just ram a bunch of features together and expect to retire off the income. Make something that is going to be useful enough that it helps someone out when they need it, and convenient enough that they will have it with them in those times. Then, take that concept and test market it to refine the design and see if it's really a good idea before you mortgage your house on it. Otherwise, someone on the internet might just have to give you a poor review.
However, if you wanted to know what my worst multitool experience was with regards to a specific tool, well, the winner of that would probably have to be the Charge XTi. I had spent a lot of money on it (full Canadian retail price) and was disappointed as soon as I got it out of the package. I didn't like the tool load out, I didn't like the "awesome" titanium that was completely worthless on it, the fancy steel was only used on one blade, and frankly I really felt cheated. If that had been my first Leatherman I doubt I would have ever bought another one.
I hope that answers your questions. A bit more long winded than I'd planned, but then, that's why I figured I needed a keyboard! :D
@captain spaulding said:
Boxers or Briefs..........?Oh wait this is supposed to be about tools right. :D
Leather Sheaths or Nylon. ;)
None, since well into the last millennium. Never ask questions you don't want the answer to. :P
I like leather. I really do. But for sheaths I gravitate towards nylon because of the better mounting options of MOLLE sheaths and they won't kill a tool as quickly by retaining moisture, and I live/work/play in a very wet environment. As much as I love the smell and feel of leather, it just doesn't compete with the feel of a rusty tool.
@Aloha007 said:
In the past 8 years I'd like to know if you were asked to sell MTo, to maybe a tool manufacturer?I have been approached a couple of times about selling MTO, and it's no secret that if the right offer came across my desk that I would sell it. That being said, I love this place, I have put all that I have into this site on many occasions and am very proud of what we have built here, so that offer would have to be extremely generous to be worthwhile. Additionally there are quite a few others here that would have to get a share as well, as they have put just as much effort into making this place possible, so the offer would have to be enough to go around as well. As of yet, no one has satisfied that amount in my head.
None of the manufacturers have come to me about buying this place though, and I doubt they ever will. This place, as it is, is a gold mine for them. They have a completely unbiased, absolutely free place to see what their clientele want in a product. There have been a few people at a few companies that didn't think we were a valuable asset, and I'd like to point out that most of them aren't at those companies anymore. If a company like Leatherman bought us out, it would cost them too much to maintain and user comments would be biased towards Leatherman products, people might feel bad about criticizing their products, which means they can't fix problems since they don't know about them.
Our honesty is more valuable as a free service than our sucking up would be if they were paying for it.
That's a hard one. I was very proud of the green and blue Charges we did, although they were very limited production. My green one was made soooo much more interesting when Tim signed it.


The Fish Ting was the first tool we actually designed here at MTO, and will always have a special place for me as well:

But if I had to choose one that I would never part with, I have to say my tiger striped Charge TTi.

I will sell a lot more of my precious things before I ever consider letting this one go. That coating is bullet proof, and it's a reminder of a good friend and great member, who I believe is no longer with us, but who I hope miraculously got better and is sipping drinks on a beach somewhere.
Keep them coming- this is fun! :D
Def
-
I never get tired of seeing that Charge TTi

As for the idea of ever selling this forum, if it were ever taken over by a greedy corporate entity who would no doubt censor things to their devious agenda, I know myself and many others would quit coming here rendering the place a real smurf hole... ::)
-
That fish ting is awesome! JR
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login