Everything You Ever Wanted to Know About MTO (But Were Afraid To Ask!)
-
Thanks for the reply Grant
Looking back at my question, I realized that it wasn't really one pertaining to MTO itself, but rather one about you. I was curious though ;) The Compact is a good SAK indeed, and probably all I really need if I wanted to go the minimalist route. That's not my way currently though 
-
That Charge is sooooo

-
Any question I can answer I will!
And yes that Charge is indeed awesome. I carried it quite a bit too, and the coating is so tough it never got a scratch.
Def
Sent from a digital multitool
-
@Grant Lamontagne said:
Any question I can answer I will!
And yes that Charge is indeed awesome. I carried it quite a bit too, and the coating is so tough it never got a scratch.
Def
Sent from a digital multitool
What's the square root of "2"
JRthat is SO irrational!

-
@Grant Lamontagne said:
Any question I can answer I will!
And yes that Charge is indeed awesome. I carried it quite a bit too, and the coating is so tough it never got a scratch.
Def
Sent from a digital multitool
What's the square root of "2"
JRthat is SO irrational!

what? I'm still trying to figure that out after over 20yrs, fig he might know,, lol. JR -
Best Multitool experience?
Worst?
Most disappointing? -
Some good stories for that, but they will have to wait till I get back to a keyboard. Way too much for a tablet!
Def
Sent from a digital multitool
-
I bet the Wingman is one of the worst/most disappointing based on the link he posted...
-
Boxers or Briefs..........?
Oh wait this is supposed to be about tools right. :D
Leather Sheaths or Nylon. ;)
-
In the past 8 years I'd like to know if you were asked to sell MTo, to maybe a tool manufacturer?
-
-
What's your favourite MT.O branded MT?
-
@Yadda said:
Best Multitool experience?
Worst?
Most disappointing?Best multitool experience huh? There's been quite a few good ones out there, but I think if I had to choose one tool I was most pleased with, I'd have to say I keep coming back to the Spirit series. The Spirit was the most anticipated tool when it was released and it didn't disappoint. It proved that tools could be elegant and beautiful while still being tough as nails and well equipped, and to this day if I had to choose one forever, that would probably be the one.
It gets funnier though, as I remember many discussions where people talked about how much they hated the peanut butter blade and wanted a drop point like on most SAKs. I don't mind the peanut butter blade, but I could understand the desire to have something more traditional. So, Victorinox answered by releasing the S version which had the drop point, but got rid of the scissors instead of the peanut butter blade! :ahhh We all thought they were drinking a bit too much in the Alps....
Finally they released the X version, which was set up just the way everyone wanted and, to quote Monty Python, there was much rejoicing. Hooray.
The worst (and I won't say who) is when small designers come up with a project and they send it to me for evaluation. Some of them are just horrible. I could name a few, but I'd rather not as these guys have worked hard on their ideas and I really would rather encourage them to keep trying rather than shoot them down. Instead I'd like to say that there is absolutely an art to making a decent multitool, one piece or otherwise. Some of these designs for the sake of a design are just not worth the cheap pot metal they are stamped from. It bothers me that guys have put a lot of effort into producing these awful tools and are so proud of them despite them being complete and utter crap. I don't want to review them because I don't want to say anything bad about something someone has put that much of their effort into, but by the same token I run a website dedicated to providing honest reviews so that people don't waste money on crap tools. It's a real conundrum.
Also, I hate bandwagon jumpers and people who doesn't understand costs. We've had a few that fell into the above category that cranked out a half assed hunk of water jet cut steel and tried to charge Atwood type money (second hand Atwood type money, which is significantly higher than buying them from Peter) for their junk. Peter makes some beautiful stuff. It is art, but it's also functional art. The man has real talent. Taking off cut hunks of steel or titanium and carving one end into a phillips like screwdriver doesn't make a good tool.
In all, there is a serious art to making a tool- you really can't just take an every day item like pliers, a lighter or an iPhone, attach a folding blade and a bottle opener and just expect the money truck to stop at your house.
There is one particular manufacturer (I won't mention his name either as I wish nothing but the best for him) who used a generic multitool handle design and stuck a bunch of parts into the handle. Good enough I suppose, but when you look at something like the SwissTool or the PST you see how the placement of each tool is crafted to fit into place, and how in many cases the tool is specifically designed to fit in that slot, occasionally around another one. Look at the handle cutouts in something like the Rebar, the Micra or the MP600ST. These are tools and features that someone thought about and put effort into figuring out how to put the most function into a tool and make it as small as possible.
These are what disappoint me the most. I could list one or two of them as examples, but then I'd be giving some of the rest some credit, which many of them don't deserve.
Bottom line- If you are going to go to the effort of designing a tool, think about what you are doing. Don't just ram a bunch of features together and expect to retire off the income. Make something that is going to be useful enough that it helps someone out when they need it, and convenient enough that they will have it with them in those times. Then, take that concept and test market it to refine the design and see if it's really a good idea before you mortgage your house on it. Otherwise, someone on the internet might just have to give you a poor review.
However, if you wanted to know what my worst multitool experience was with regards to a specific tool, well, the winner of that would probably have to be the Charge XTi. I had spent a lot of money on it (full Canadian retail price) and was disappointed as soon as I got it out of the package. I didn't like the tool load out, I didn't like the "awesome" titanium that was completely worthless on it, the fancy steel was only used on one blade, and frankly I really felt cheated. If that had been my first Leatherman I doubt I would have ever bought another one.
I hope that answers your questions. A bit more long winded than I'd planned, but then, that's why I figured I needed a keyboard! :D
@captain spaulding said:
Boxers or Briefs..........?Oh wait this is supposed to be about tools right. :D
Leather Sheaths or Nylon. ;)
None, since well into the last millennium. Never ask questions you don't want the answer to. :P
I like leather. I really do. But for sheaths I gravitate towards nylon because of the better mounting options of MOLLE sheaths and they won't kill a tool as quickly by retaining moisture, and I live/work/play in a very wet environment. As much as I love the smell and feel of leather, it just doesn't compete with the feel of a rusty tool.
@Aloha007 said:
In the past 8 years I'd like to know if you were asked to sell MTo, to maybe a tool manufacturer?I have been approached a couple of times about selling MTO, and it's no secret that if the right offer came across my desk that I would sell it. That being said, I love this place, I have put all that I have into this site on many occasions and am very proud of what we have built here, so that offer would have to be extremely generous to be worthwhile. Additionally there are quite a few others here that would have to get a share as well, as they have put just as much effort into making this place possible, so the offer would have to be enough to go around as well. As of yet, no one has satisfied that amount in my head.
None of the manufacturers have come to me about buying this place though, and I doubt they ever will. This place, as it is, is a gold mine for them. They have a completely unbiased, absolutely free place to see what their clientele want in a product. There have been a few people at a few companies that didn't think we were a valuable asset, and I'd like to point out that most of them aren't at those companies anymore. If a company like Leatherman bought us out, it would cost them too much to maintain and user comments would be biased towards Leatherman products, people might feel bad about criticizing their products, which means they can't fix problems since they don't know about them.
Our honesty is more valuable as a free service than our sucking up would be if they were paying for it.
That's a hard one. I was very proud of the green and blue Charges we did, although they were very limited production. My green one was made soooo much more interesting when Tim signed it.


The Fish Ting was the first tool we actually designed here at MTO, and will always have a special place for me as well:

But if I had to choose one that I would never part with, I have to say my tiger striped Charge TTi.

I will sell a lot more of my precious things before I ever consider letting this one go. That coating is bullet proof, and it's a reminder of a good friend and great member, who I believe is no longer with us, but who I hope miraculously got better and is sipping drinks on a beach somewhere.
Keep them coming- this is fun! :D
Def
-
I never get tired of seeing that Charge TTi

As for the idea of ever selling this forum, if it were ever taken over by a greedy corporate entity who would no doubt censor things to their devious agenda, I know myself and many others would quit coming here rendering the place a real smurf hole... ::)
-
That fish ting is awesome! JR
-
I have a question Def
Have you ever/Would you ever consider commissioning a MT manufacturer to design & build a multitool to your spec'?
I've read in the past your frustration with needle nose pliers. I'm also guessing cast steel would be favoured.
Or let me re-phrase the question... What's your biggest frustration with multitools or more to the point their designers??
-
This may have been answered but, What/Who got you started with Multitools or SAKs? What was your first MT/SAK/Knife?
-
@tosh said:
I have a question DefHave you ever/Would you ever consider commissioning a MT manufacturer to design & build a multitool to your spec'?
I've read in the past your frustration with needle nose pliers. I'm also guessing cast steel would be favoured.
Or let me re-phrase the question... What's your biggest frustration with multitools or more to the point their designers??
Have I ever thought about commissioning a multitool to our spec? Yes.
However, there are a lot of problems with that. For starters, we can't all agree on what the "perfect" tool needs to have. It's like trying to get everyone here to agree what is best to have on a pizza. I could make my own choices on what works best for me, but then others here would just see it as yet another tool, since it would amoutn to the same thing- other people deciding what is most important.
Another problem is patents. I would want to take this tool from Manufacturer A, the handles from Manufacturer B, the plier head from Manufacturer C, lock mechanisms from Manufacturer D etc. Then some of my own ideas/concepts.... the tool would end up costing a fortune just to cover patent permissions! :P
We are also a critic/review organization. Designers work hard to do what they do and critics don't put in near the effort to belittle many of the features that talented people spent a lot of time working on. For me to walk in and pretend I know it all simple because I am someone who complains about things on the internet could be seen as a slap in the face of everyone who has ever done any professional design work. If I ever made that step, I'd want to be sure that I did it respectfully.
Which leads me to the next problem- I have absolutely no idea how the hell to design a tool. Or anything. I am trying to teach myself to use CAD software (specifically Google Sketchup at this point) but I haven't have a lot of time to devote to it lately. One of these days I'll figure it all out... :D
My biggest frustration with multitools and designers? That's easy- lawyers! :P
I see guys here coming up with great ideas, designs and mods and then the next year I see those ideas at SHOT being rolled out to the world. It frustrates me that the guys actually coming up with the ideas can never get credit for them. Think about it- members buy the tool with their own money, then modify it to make it better, sometimes spending more of their own money and putting their time into it, then the design staff and Company X takes the idea (as well they should) and produce it, making that company a good chunk of money. And none of the credit goes to the MTO member who came up with the idea in the first place because the lawyers can't acknowledge us in any way or everyone on the internet would claim ideas were theirs and companies would be forced to pay out millions of dollars.

HUGE frustration.
@Aloha007 said:
This may have been answered but, What/Who got you started with Multitools or SAKs? What was your first MT/SAK/Knife?No worries about asking questions that may have been covered in the past. I don't mind a bit. :D
My father was a combat engineer in his early days, and had a rough upbringing being dragged from logging camp to logging camp. He taught me early on that the right tool for the job is good, but if things need to be done you can't always get the right tool, so you need to have good, reliable, all purpose tools handy. He kept a lawn mower running for over 20 years by using bits and pieces lying around- Lego pieces, Mechano parts, and bits from toys. It didn't matter as long as the thing kept running. I may not have gotten his mechanical ability, but I did get his appreciation for good tools. Dad had a couple of good knives, a good hatchet (he still has/uses it today) and a few other good tools that he uses for just about everything. He has a well stocked tool box and a number of power tools as well, but he can accomplish pretty well anything with just what he has on hand. And in addition to using them hard, he maintains them well, which is why they are still around today.
I guess you could say my father is indirectly responsible for Multitool.org and getting me into SAKs. My first one was a Camper, a gift from one of the guys he worked with. You can read all about it here:
http://swissarmyknights.com/articles/2007/539-collection-highlights-april-07

My first multitool was the Leatherman Micra. I bought it at a knife shop in Toronto because I was curious about these Leatherman things. I liked it so much I gave it to my girlfriend at the time and went back the next day to get a PST II.
My first knife? I don't really recall, but if I had to guess it was probably one of those awful Rambo knives that were huge in the 80's.
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login