Detron's Collection wiki (Very pic heavy)
-
CYBER-YEOMAN
91mmSpoiler:
This is a custom built by GigaHz, to my specification.I carry this SAK 95% of the time
This SAK has the following tools:
Front
Large Blade, with thicker tang
Combo tool
Older Grey 8x Magnifier Glass
Older Longer In-line Phillips
CyberTool Layer
ScissorsBack
Hook with fingernail file
Corkscrew
Mini screwdriver stored in corkscrew
KeyringScale
Tooth pick
Tweezers
Ball point pen
Straight pinScales are Ruby Plus
Tang Stamps
the extra bits and adapter I carry in my bag
CyberTool comes with
Torx #8, #10, #15
Hex 4mm
Flat 4mm
Phillips #2
Pozidrive #0, #1add to this are the following
Torx #4, #5, #6, #7, #9, #20
Hex .7mm, .9mm, 1.3mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 1/16", 5/64", 3/32", 1/8", 5/32"
Flat 1mm, 1/16", 5,64", 3/32", 1/8"
Phillips #000, #00, #0, #1
3 blade phillips 2mm, 3mmI rarely need these extra bits, but I feel good knowing they are close by
in order to make this custom SAK, I sacrificed a CyberTool 34, a Compact, and an Explorer
-
CYBERTOOL LITE
91mm
[spoiler]As a techie who is around computers all the time, a CyberTool layer is a very useful layer that I like to have with me. The only other tool that is very important to me is the Magnifier, checking things on a motherboard can be tough without it. So having a SAK that has both is a huge plus. Add in a flashlight (not the greatest one, but not that bad) and this is a Great tool for a IT type to have.This SAK has the following tools:
Front
Large Blade, with thinner tang
Small Blade
Scissors
Pliers
CyberTool Layer
newer plastic 5x Magnifier Glass
LED Light
Can Opener
Cap lifterBack
Awl
Hook
Corkscrew
Mini screwdriver stored in corkscrew
KeyringScale
Tooth pick
TweezersScales are StayGlow
Tang Stamps
CyberTool comes with
Torx #8, #10, #15
Hex 4mm
Flat 4mm
Phillips #2
Pozidrive #0, #1[spoiler] -
CYBERTOOL 41
91mmSpoiler:
This was my first REAL SAK. I bought it in 2006, and it basically sat in my desk drawer at work for years, until I discovered MTO, then it was a prized possesion.As a techie who is around computers all the time, a CyberTool layer is a very useful layer that I like to have with me. Since I love having a Magnifier with me to see small pins and writing on a motherboard or other PCB, this tool does not see as much pocket time as other tools do.
This SAK has the following tools:
Front
Large Blade, with thicker tang
Small Blade
File (older, less aggressive)
Wood saw
Scissors
Pliers
CyberTool Layer
Can Opener
Cap lifterBack
Awl
Hook
fine screwdriver
Chisel
Corkscrew
Mini screwdriver stored in corkscrew
KeyringScale
Tooth pick
Tweezers
Ball point pen
Straight pinScales are Sapphire plus
Tang Stamps
CyberTool comes with
Torx #8, #10, #15
Hex 4mm
Flat 4mm
Phillips #2
Pozidrive #0, #1 -
CYBERTOOL 41
91mmSpoiler:
As a techie who is around computers all the time, a CyberTool layer is a very useful layer that I like to have with me. Since I love having a Magnifier with me to see small pins and writing on a motherboard or other PCB, this tool does not see as much pocket time as other tools do. This SAK does have the newer file, and I LOVE this file! it is very aggressive.This SAK has the following tools:
Front
Large Blade, with thicker tang
Small Blade
File (newer, more aggressive)
Wood saw
Scissors
Pliers
CyberTool Layer
Can Opener
Cap lifterBack
Awl
Hook
fine screwdriver
Chisel
Corkscrew
Mini screwdriver stored in corkscrewScale
Tooth pick
Tweezers
Ball point pen
Straight pinScales are Ruby plus
Tang Stamps
CyberTool comes with
Torx #8, #10, #15
Hex 4mm
Flat 4mm
Phillips #2
Pozidrive #0, #1 -
Serrated CyberChamp
91mmSpoiler:
This was my first Custom SAK.As a techie who is around computers all the time, a CyberTool layer is a very useful layer that I like to have with me. This SAK also has a Magnifier which I find very useful looking at PCBs and such.
This SAK has the following tools:
Front
Large Blade, with thinner tang
Small Blade
File (newer, more aggressive)
Large Serrated Blade with thicker tang
Small Blade
CyberTool Layer
Scissors
Pliers
Newer Magnifier
Newer, shorter, in-line Phillips
Can Opener
Cap lifterBack
Awl
Hook
fine screwdriver
Chisel
Corkscrew
Mini screwdriver stored in corkscrew
KeyringScale
Tooth pick
Tweezers
Ball point pen
Straight pinScales are Ruby plus
Tang Stamps
CyberTool comes with
Torx #8, #10, #15
Hex 4mm
Flat 4mm
Phillips #2
Pozidrive #0, #1here is a size comparason with this custom and a SwissChamp XLT on the left, and a SwissChamp on the right
here is the SwissChamp tear down (in reverse order) that might help some with spring identification
I also used a CyberTool 34 and a Serrated Spartan (just the serrated blade layer was used from this SAK.
-
SwissChamp XLT
91mmSpoiler:
This is a beast! A great SAK if you do not mind the size.
This XLT has the newer File and the older Mag glass and Phillips, so that should help narrow down the date it was made. (not to mention I love the new file, and the Old Magnifier, this is the perfect mix for me)This SAK has the following tools:
Front
Large Blade, with thinner tang
Small Blade
File (newer, more aggressive)
Wood saw
Fish scaler
Scissors
Pruning Blade
Electrician's Blade
Pharmaceutical Spatula
CyberTool Layer
Pliers
Older Magnifier
Older, Longer, in-line Phillips
Can Opener
Cap lifterBack
Awl
Hook
fine screwdriver
Chisel
Corkscrew
Mini screwdriver stored in corkscrew
KeyringScale
Tooth pick
Tweezers
Ball point pen
Straight pinScales are Ruby plus
Tang Stamps
CyberTool comes with
Torx #8, #10, #15
Hex 4mm
Flat 4mm
Phillips #2
Pozidrive #0, #1 -
This thread is a great motivator, it makes me want to post everything as fast as I can
-
This is a great idea!
I never mind looking at pics of another MT.Oer's collection!! -
SwissChamp 1
91mmSpoiler:
This is a SwissChamp, not too much I could addThis SAK has the following tools:
Front
Large Blade, with thicker tang
Small Blade
File (older, less aggressive)
Wood saw
Fish scaler
Scissors
Pliers
Older Magnifier
Older, Longer, in-line Phillips
Can Opener
Cap lifterBack
Awl
Hook
fine screwdriver
Chisel
Corkscrew
Mini screwdriver stored in corkscrew
KeyringScale
Tooth pick
Tweezers
Straight pinScales are Camo
Tang Stamps
-
SwissChamp 2
91mmSpoiler:
This is a SwissChamp, not too much I could addThis SAK has the following tools:
Front
Large Blade, with thicker tang
Small Blade
File (older, less aggressive)
Wood saw
Fish scaler
Scissors
Pliers
Older Magnifier
Older, Longer, in-line Phillips
Can Opener
Cap lifterBack
Awl
fine screwdriver
Chisel
Corkscrew
Mini screwdriver stored in corkscrew
KeyringScale
Tooth pick
Tweezers
Ball Point Pen
Straight pinScales are Red Plus
Tang Stamps
-
SwissChamp 3
91mmSpoiler:
This is a SwissChamp, not too much I could addThis SAK has the following tools:
Front
Large Blade, with thicker tang
Small Blade
File (older, less aggressive)
Wood saw
Fish scaler
Scissors
Pliers
Older Magnifier
Older, Longer, in-line Phillips
Can Opener
Cap lifterBack
Awl
fine screwdriver
Chisel
Corkscrew
Mini screwdriver stored in corkscrew
KeyringScale
Tooth pick
Tweezers
Ball Point Pen
Straight pinScales are Red Plus
Tang Stamps
-
Champion 1
91mmSpoiler:
The Champion is a great SAK, everything the SwissChamp has except the pliers.This SAK has the following tools:
Front
Large Blade, with thinner tang
Small Blade
File (older, less aggressive)
Wood saw
Fish scaler
Scissors
Older Magnifier
Older, Longer, in-line Phillips
Can Opener
Cap lifterBack
Awl
fine screwdriver
Corkscrew
Mini screwdriver stored in corkscrew
KeyringScale
Tooth pick
TweezersScales are Red
Tang Stamps
-
Champion 2
91mmSpoiler:
The Champion is a great SAK, everything the SwissChamp has except the pliers.This SAK has the following tools:
Front
Large Blade, with thinner tang
Small Blade
File (older, less aggressive)
Wood saw
Fish scaler
Scissors
Older Magnifier
Older, Longer, in-line Phillips
Can Opener
Cap lifterBack
Awl
Hook
fine screwdriver
Chisel
Corkscrew
Mini screwdriver stored in corkscrew
KeyringScale
Tooth pick
Tweezers
Ball Point Pen
Straight pinScales are Red Plus
Tang Stamps
-
Great way to share your collection!
My favorite is the new CT41 :)
-
Wow, you weren't kidding about being pic heavy ;) No worries, because this is great. I can't check it all out right now, but I wanted to get into this thread so that I can check it out as it continues. Nice one buddy

-
BO Blast
Spoiler:
The Leatherman Blast is one of my favorite Multitools, it is not perfect, but I really feel prepared when I carry it. this particular Blast is Black-Oxide coated and is
dated 1212 /1212.First lets look at the basic design
Though the Blast is thicker than a PST, the basic design seems to follow that basic origin, except for the locks, and the Zytel
Leatherman provided the following information, (hidden since so many do not need this info)
CLOSED LENGTH: 4 in | 10 cm
WEIGHT: 6.9 oz | 196 g
BLADE LENGTH: 3.0 in | 7.62 cm
1 Needlenose Pliers
2 Regular Pliers
3 Wire Cutters
4 Hard-wire Cutters
5 420HC Blade
6 Saw
7 Spring-action Scissors
8 Wood/Metal File
9 Small Bit Driver
10 Phillips Screwdriver
11 Large Screwdriver
12 Small Screwdriver
13 Ruler (8 in | 19 cm)
14 Bottle Opener
15 Can Opener
16 Wire Stripperthey failed to count the lanyard ring
and they also include a Downloadable guide
WEIGHT (this was the most surprising part!)
the first thing I noticed about this tool was the weight, it seemed light, not cheap, but lighter than I expected.
so if we see where this tool falls compared to other Leather tools, we might find some surprisesKick 5.2
Flair 5.5
Juice Cs4 5.5
Juice KF4 5.5
Fuse 6
Pulse 6
Rebar 6.7
Juice Xe6 6.7
Blast 6.9
Crunch 6.9
Sidekick 7
Wingman 7
Wave - Original 8
Charge TTi 8.2
Charge AL 8.3
Charge ALX 8.3
Charge XTi 8.3
Charge Ti 8.4
New Wave 8.5this puts the Blast in a great spot as far as weight goes, and for those who are put off by weight it is a great balance of tools to weight ratio.
it weighs less than the Wingman and the Sidekick, :o and is only slightly heavier than the Juice Xe6TOOLS
Needlenose Pliers, Regular Pliers, and Wire Cutters
the needlenose pliers are the old, non-replaceable wire cutter version, but they are a very capable plier head.
notice on mine the first "A" in Leatherman does not show the top hole, but the second one does
The wire cutters do include the hard wire notch.the teeth on the plier head are ample, and provide excellent purchase
420HC Blade
I thought this blade looked extremely long, but it turns out it's length is a mirage due to it's thinness
here you can see it next to the waveSaw
the saw seems very sharp and I imagine that the low height of this blade would also make it a great saw for small challenges.
Scissors
The scissors on the Blast are really good, not to the level of Victorinox scissors, or the Surge for that matter but as for a small set included on a Leatherman tool, they are great.
Wood/Metal File
I love a diamond file, but the Blast does not have on, however this file should solve any small file needs that could pop up. it will not sharpen your knife blade to a razor's edge or anything, but it will remove material as needed. The metal saw at the base can cut small metal as needed too, though I have never actually tried this myself with a Leatherman, I have done it successfully with a SwissChamp.
Small Bit Driver
I know many see this as a useless tool on a full sized MT, but I love it and use it on a regular bases
Phillips Screwdriver
The Phillips screwdriver on the Blast is awesome, full 3D and a good reach that can turn recessed screws.
Large Screwdriver
Though Leatherman titled this a screwdriver, it can also be a "Light-Duty" prybar. I use it to open paint cans and wiggle boards into place with no ill affects.
Small Screwdriver
this smaller flat head screw driver has a good reach and is a nice size for many common tasks
Ruler (8 in | 19 cm)
many people joke that the ruler on a MT is just a way to get the tool count higher, well, I use it all the time to determine how long a screw I need, or how big of a gap I need to fill, etc, etc. to me it is a valuable addition.
it is very accurate, my camera angle is the reason it looks slightly off here, best I could capture with a point and shoot
Bottle Opener, Can Opener, Wire Stripper
I have no issues in using Leatherman's can opener, I am not saying it is the best on a MT or SAK, but I like using it. I do not really use a bottle opener often, but I imagine this would not be my first choice when it came to that duty, however, I could open a bottle, and for me, that is good enough since I would not go thirsty.
I have used the wire stripper several times, and after a little practice, it works very well.Now, I noticed that the can opener was not the outermost tool, and I thought this might cause a problem with the tool itself getting in the way, so I did a little experimentation and realized I could not manage to get the tool body to get in the way no matter how hard I tried.
Lanyard Ring
Not much to say, this is thin, but there is one here for those who would want to use it. I have used it to drop my tool down to a worker below before, without worrying about breaking my tool
Grip Comfort
I personally love the feel of the Blast in my hand, I have large hands, (8.5" wrist, 9" finger span from pinky to thumb, and 8" palm base to tip of middle finger)
the Zytel along with the finger cut-outs, makes this tool a joy to use.Lost space due to the Zytel
Yes the Zytel takes up room, and more tools could be included if this material was removed. This is a larger problem the smaller the tool, if you look at it from a percentage view.
the Kick, looses the same amount as the Fuse and Blast, but Kick had less to start with, so a higher percentage was lost to incorporate this material.
for example, the "Tool Room" is the same between the Rebar and the Blast (if not identical, then only a slight difference)Negatives
To me the Blast only misses on a few areas, and those areas are not always important.
I love the flexibility the large bit adapter provides, when coupled with the bit kit, bit extender, or both. I know this is a controversial item to some people, but I like having it.
The sad truth is I have carried the full bit kit for over a year, and never once needed to use it. however, I know as soon as I leave it home, I will need it. to me it is a piece of mind, nothing more.No one hand open, very useful, but not a deal breaker for me.
no reamer
Summary
The Blast is my favorite Leahterman tool that does not have OHO abilities. it has everything on it except the reamer and large bit driver, and feels great in the hand.
if this was the only tool you ever carried, it could handle 98% of what ever life threw at you. I am not saying take a job as a mechanic and ONLY have this tool, but when away from your real tools, this should get you by with ease.Positives
Light
Tons of tools considering the weight
Comfortable to use
Every tool locksNegatives
No One hand Open
No reamer
No Large bit driverthough I have 3 negatives, they are all items I can live without. I am sure the knife blade could act as a reamer in an emergency, OHO is a convenience only for me. so I am down to one real negative, that I have proven is a piece of mind issue only.
I Love the Blast, and the Black Oxide version is even better!
-
Troubleshooter
91mmSpoiler:
The Troubleshooter to me is the perfect mix of traditional tools for indoor use.
I love the Mag glass, and inline phillips, but this is a very capably SAK without them.This SAK has the following tools:
Front
Large Blade, with thicker tang
Small Blade
File (older, less aggressive)
Scissors
Pliers
Can Opener
Cap lifterBack
Awl (With sewing eye)
Hook
Chisel
Phillips Driver
KeyringScale
Tooth pick
Tweezers
Ball Point Pen
Straight pinScales are Black Plus (originally they were Red Marlboro scales that were melted)
Tang Stamps
-
Hoffritz Limited Edition 2
91mmSpoiler:
The Hoffritz Limited Edition 2 is very similar to the Troubleshooter that came later. It is one of my favorite SAKs collection wise, because it is a limited production SAK. not crazy scarce, but limited and mine is in really good shape. I bought it on ebay, it was listed as a SwissChamp
but I knew better.you can see that mine is # 0290 / 2000
here is the can key
here is the metal inlay on the front scale
here is the metal inlay on the back scale
This SAK has the following tools:
Front
Large Blade, with thicker tang
Small Blade
File (older, less aggressive)
Scissors
Pliers
Can Opener
Cap lifterBack
Awl (With sewing eye)
Phillips Driver (with can key)
KeyringScale
Tooth pick
TweezersScales are Red, with inlaid "Hoffritz" and "LIMITED EDITION 2"
Tang Stamps
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login














































































































































































































