IDL T10 MultiTool Review
-
Lost in a sea of better known competition, the T10 Multitool by IDL Tools is a lesser known, but not lesser quality, contender.
The tool is all stainless steel constriction, and held together with peened pins. The tool is 2" (51mm) long, 1 1/8" (29mm) wide, and an incredibly thin 5/16" (8), including pins. Without them, it's only 1/4" (6.5mm) thick. Weight is 1.7 oz (49g).
Here is the tool folded up.

Here is the tool unfolded in plier configuration

And here is the tool folded with outside folding tools deployed.

Here's the T10 next to the Leatherman Squirt PS4, Leatherman Micra, Victorinox Rambler, and SOG Crosscut for size comparison.

It is shorter, slimmer, and wider than other similar tools. Thickness seems to be the primary dimension felt in pocket carry, so this tool seems to almost disappear in the pocket.
The primary function of the T10 is as a small pair of pliers. The needle nose is less pointed than most small tool offerings. The wide tips might make getting into very small spaces problematic, but the tips meet up with great precision. The teeth of the jaws are well formed, and aggressive. Many other small plier based tools will flex frighteningly under rotational torque, but the pliers of the T10 seem a good deal more sturdy. In fact, they slightly exceed the much larger Leatherman Juice series in this regard. The wire cutters will easily manage 12-gauge solid copper wire. The abilities of the plier head of this tool is more limited by the short tool handles than the plier head itself.
And speaking of the handles, when the tool is open onto plier configuration, the rounded metal of the handles offers a fairly comfortable and ergonomic hold under light and moderate forces. Under heavy force, the ends of the handles can dig uncomfortably into the palm.
The back of the plier head has an opening that allows the tool to be clamped onto a keyring when closed.

This holds the ring fairly securely, but forces the keyring to lie nearly perpendicular to the tool body. This is less than ideal if the intent is pocket carry. While this may be a problem for some, it is also alows the tool to be quickly removed from the keyring.
All of the remaining functions of the tool are accessible while the plier head is folded shut. All of these tools also have locks to prevent folding under force. The locking tabs at the end of the arm can unlock the tools, but I find these tabs to be small and somewhat uncomfortable to use. I prefer simply deploying a second tool far enough to cause the lock to disengage. Tools all have nail nicks for extraction. These nail nicks are close to the pivots and recessed on the center tools on each arm of the tool (the nail file and philips head driver), making them difficult to open without first opening the outermost tools. Spring retention of all tools is strong, adding to the difficulty.
One arm of the tool has tweezers, a combination bottle opener small screwdriver, and a nail file. The tweezers are fairly precise, and function as expected. The small screwdriver is not quite fine enough (in my case) to fit an eyeglass screw, which is the main function of this scale driver, in my opinion. It may still find other functions, and a bit of work with sandpaper could slim it down to fit it's intended role. The nail file has a course and fine side, and functions as expected. It comes to a tip more reminiscent of an awl than a tool for cleaning under nails, and may work as an awl to some degree.
The other arm holds a flathead driver, philips driver, and small blade. The flathead is well formed and a good size for most tasks. It is also be capable of light pry duties. The phillips driver has a long, thin shaft, with a finely formed and fully three dimensional head. This driver works very well on small electronics screws. The thin shaft may make it a bit weak for use on larger tasks. In the case of all of the drivers, the wide body of the tool allows for ample grip to apply torque, and the locks mean a fair amount of force could be applied. The final tool is the plain edge, chisel ground blade. It is up to small tasks but it's size is going to limit its usefulness. It is perfectly adequate for simple day to day cutting chores.
The price on this tool seems to be in line with, or a bit lower than comparable offerings from more major brands. If you don't need scissors on your keychain sized tool, this becomes a real contender.
Final Note: This tool was originally produced as the M4 Sebertool, and there may be branded versions such as Craftsman.
<u>Pros</u>
Excellent pliers
Great drivers
Locking tools<u>Cons</u>
Difficult to reach nail nicks
Difficult to unlock tool locks
Problematic keyring attachment -
I wanted to acknowledge J-Sews review on the M4 Sbertool.
</topic/3088I remember the thread, and posting in it about my IDL T10, but intentionally skipped rereading it in preparation for writing this review. I wanted any thoughts on the tool to be as unswayed by outside influence as can be in such a small field.
But at the same time, it was a good writeup and didn't want to pretend to ignore it.
-
-
-
Fixed. Now the correct pic is there showing outboard tools.
-
-
It was a real shocker to me how well made it was, and how insanely STURDY, particularly as a pair of pliers. It's a bit of a shame that it doesn't have scissors, which are pretty much at the top of my want lost for carry tools.
Otherwise, it'd be a real contender for everyday carry (for me).
If scissors aren't your thing, I think it's great tool.
-
I have a total of four of this tool, in three different versions. One Craftsman, one Seber, two IDL's. If you think the IDL's are good, then you should track down the other two, the quality of the Seber's and Craftsmen is so much better.
They are all one of my favorite plier-based keychain tools though, overall in this category I think they are all overshadowed a little by the Leathermen Squirt P4's and PS4's for quality and functionality.
Some of the IDL/Seber/C'men tools can be nailbreakers to deploy. Beware! -
-
The IDL tools page for the T10 has a 'Buy now' button, and (currently) lists the price as $16.99. I don't know if that includes shipping.
http://idltools.e-beans.net/products/t10_multitool.html
Hope this helps.

EDIT: Also... could a mod go in and change my typo in the initial post. Second paragraph, 7th word, 'constriction' should obviously be 'construction'.

-
-
Thank you.

I sometimes feel a bit bad, not always having the funds to support the site, but I hope my work products, reviews and such, add value.
-
-
@Lynn LeFey said:
The IDL tools page for the T10 has a 'Buy now' button, and (currently) lists the price as $16.99. I don't know if that includes shipping.http://idltools.e-beans.net/products/t10_multitool.html
Hope this helps.

That helped! Thanks.
Shipping is $599 that brings to tool to $23, not a bad price from what I see from your review.
BUT, some technical issue prevented me more forward from the check out page, i contacted them about the issue, now just wait. -
I hope you just forgot a , in that shipping price.
Otherwise :ahhh -
-
-
I bought two IDL T10's for $10 shipped a while ago. From eBay, when IDL was blowing them out.
-
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


