What did you use your Leatherman for today?
-
Used the bronze scraper on the mut to scrape clean the sides of my stainless watch case, was stained with a washing paste i use to clean my hands of grease and some was under it for a couple of days and got really stubborn to remove. The scraper took it out and didnt harmed the watch at all

-
i cut the crap out of my thumb.... 5 stitches. hope you all enjoy the glamour shot. as many knives as i collect and own over the years, i guess i was due ;)

-
I re hung a door today using my Charge ALX,only other tool needed was a drill.
-
What a pain in the ask though! But the doctors complimented and thanked me for using a sharp blade. If it were not for a pesky vessel, it would have been an easy fix. The charge is back on my hip but not before a few choice words ;)
@captain spaulding said:
i cut the crap out of my thumb.... 5 stitches. hope you all enjoy the glamour shot. as many knives as i collect and own over the years, i guess i was due ;)
Your now a official member of the Capt. Spaulding blood donation club. :D
Sent from my KFSOWI using Tapatalk
-
@Accujohn said:
What a pain in the ask though! But the doctors complimented and thanked me for using a sharp blade. If it were not for a pesky vessel, it would have been an easy fix. The charge is back on my hip but not before a few choice words ;)@captain spaulding said:
i cut the crap out of my thumb.... 5 stitches. hope you all enjoy the glamour shot. as many knives as i collect and own over the years, i guess i was due ;)
Your now a official member of the Capt. Spaulding blood donation club. :D
Sent from my KFSOWI using Tapatalk
LOL Now I am glad I am not the only one. I cut the crap out of my index finger with my Freestyle CX. 3 stitches for me. Captain Spaulding am I fit to be a part of your club too? ;)
-
Oh and back on topic, used my Wave to saw a hole in a fish tank canopy so that I could accomodate for the canister filter inlet and outlet pipes. My SAK awl helped out too to give me a starting point to saw from.
-
I used my Raptor to open a parcel.
-
I used my Leatherman 1 to tighten a nut on a hydration machine.
-
I used my leatherman style cs to peal a cucumber for lunch. [emoji41]
Brüder, die Brüdern Helfen
-

I cut open a couple of 50 pound bags of quick setting concrete mix with my Charge Ti while installing a flag pole. This is the first time I have dumped the dry mix in the hole and then added water, rather than mixing it first. The telescoping poles at www.uncommonusa.com are awesome, btw. -
@super m said:
@super m said:
I used my leatherman style cs to peal a cucumber for lunch. [emoji41]
Brüder, die Brüdern Helfen
I love my Style CS. I recently put a hair-splitting edge on mine thanks to tips from Joel

How so saw man ? Where can I find that info ?
Brüder, die Brüdern Helfen
I started with a coarse side of the stone, 5 swipes on the edge to 1 angled swipe on the edgeless side. I repeated this a few times, then did the same on the fine stone.
-
@super m said:
@super m said:
I used my leatherman style cs to peal a cucumber for lunch. [emoji41]
Brüder, die Brüdern Helfen
I love my Style CS. I recently put a hair-splitting edge on mine thanks to tips from Joel

How so saw man ? Where can I find that info ?
Brüder, die Brüdern Helfen
I started with a coarse side of the stone, 5 swipes on the edge to 1 angled swipe on the edgeless side. I repeated this a few times, then did the same on the fine stone.
Thanks my friend [emoji106][emoji41]
Brüder, die Brüdern Helfen
-
today was Leatherman use to the max for a desk pilot like myself.
we are moving offices (short notice, no time to prepare, furniture must go, etc, etc)
so I disassembled 5 interconnected cubicles, 3 storage racks, 2 network racks, with just what I had on me today (Wave, Bit extender, Full Bit kit, Croc, and Cyber-Yeoman)
I was very popular today!!

-
@mrmustard said:
Oh and back on topic, used my Wave to sawI beg your pardon... is the topic not what I used my leatherman for today? That was in fact what I used it for yesterday.
Sent from my KFSOWI using Tapatalk
-
The Rebar and my Solarforce T1 got a good workout the other day.
My reverse lights aren't very bright at night (especially on the farm) so I wanted to sort that out, and I also never have enough light to see in my toolbox when I'm in the back of the truck. So Rebar to the rescue.
I had to take out a bunch of the dash and center console so I could run some wiring down to the back of the truck under the carpet.

I drilled and tapped some holes in my tow bar frame and installed a small 2000 lumen LED bar on it

So now I can see behind me

Then for the boot lighting I used the Rebar to wire up some LED running lights to my boot door circuit. Waaaay brighter now.
The Rebar is perfect for this kind of stuff. The electrical crimpers are VERY useful. They should be standard on all Leatherman models.

-
:D :D :D :D

-
@powernoodle said:
I cut open a couple of 50 pound bags of quick setting concrete mix with my Charge Ti while installing a flag pole. This is the first time I have dumped the dry mix in the hole and then added water, rather than mixing it first. The telescoping poles at www.uncommonusa.com are awesome, btw.Here's a tip I learned during my stint in the building-supply business: When anchoring a post in the ground, center the post in the hole; pour a bag of ready-mix in the bottom; tamp soil into the middle section, then pour another bag of ready mix at the top. Tamp firm. Cover the last bit with soil or sod. The next rain takes care of the rest.
I find that this method makes for a tighter fit, with less movement. Adding water makes things mushy, and it's harder to keep things aligned.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login