What did you use your Leatherman for today?
-
i cut the crap out of my thumb.... 5 stitches. hope you all enjoy the glamour shot. as many knives as i collect and own over the years, i guess i was due ;)

-
I re hung a door today using my Charge ALX,only other tool needed was a drill.
-
What a pain in the ask though! But the doctors complimented and thanked me for using a sharp blade. If it were not for a pesky vessel, it would have been an easy fix. The charge is back on my hip but not before a few choice words ;)
@captain spaulding said:
i cut the crap out of my thumb.... 5 stitches. hope you all enjoy the glamour shot. as many knives as i collect and own over the years, i guess i was due ;)
Your now a official member of the Capt. Spaulding blood donation club. :D
Sent from my KFSOWI using Tapatalk
-
@Accujohn said:
What a pain in the ask though! But the doctors complimented and thanked me for using a sharp blade. If it were not for a pesky vessel, it would have been an easy fix. The charge is back on my hip but not before a few choice words ;)@captain spaulding said:
i cut the crap out of my thumb.... 5 stitches. hope you all enjoy the glamour shot. as many knives as i collect and own over the years, i guess i was due ;)
Your now a official member of the Capt. Spaulding blood donation club. :D
Sent from my KFSOWI using Tapatalk
LOL Now I am glad I am not the only one. I cut the crap out of my index finger with my Freestyle CX. 3 stitches for me. Captain Spaulding am I fit to be a part of your club too? ;)
-
Oh and back on topic, used my Wave to saw a hole in a fish tank canopy so that I could accomodate for the canister filter inlet and outlet pipes. My SAK awl helped out too to give me a starting point to saw from.
-
I used my Raptor to open a parcel.
-
I used my Leatherman 1 to tighten a nut on a hydration machine.
-
I used my leatherman style cs to peal a cucumber for lunch. [emoji41]
Brüder, die Brüdern Helfen
-

I cut open a couple of 50 pound bags of quick setting concrete mix with my Charge Ti while installing a flag pole. This is the first time I have dumped the dry mix in the hole and then added water, rather than mixing it first. The telescoping poles at www.uncommonusa.com are awesome, btw. -
@super m said:
@super m said:
I used my leatherman style cs to peal a cucumber for lunch. [emoji41]
Brüder, die Brüdern Helfen
I love my Style CS. I recently put a hair-splitting edge on mine thanks to tips from Joel

How so saw man ? Where can I find that info ?
Brüder, die Brüdern Helfen
I started with a coarse side of the stone, 5 swipes on the edge to 1 angled swipe on the edgeless side. I repeated this a few times, then did the same on the fine stone.
-
@super m said:
@super m said:
I used my leatherman style cs to peal a cucumber for lunch. [emoji41]
Brüder, die Brüdern Helfen
I love my Style CS. I recently put a hair-splitting edge on mine thanks to tips from Joel

How so saw man ? Where can I find that info ?
Brüder, die Brüdern Helfen
I started with a coarse side of the stone, 5 swipes on the edge to 1 angled swipe on the edgeless side. I repeated this a few times, then did the same on the fine stone.
Thanks my friend [emoji106][emoji41]
Brüder, die Brüdern Helfen
-
today was Leatherman use to the max for a desk pilot like myself.
we are moving offices (short notice, no time to prepare, furniture must go, etc, etc)
so I disassembled 5 interconnected cubicles, 3 storage racks, 2 network racks, with just what I had on me today (Wave, Bit extender, Full Bit kit, Croc, and Cyber-Yeoman)
I was very popular today!!

-
@mrmustard said:
Oh and back on topic, used my Wave to sawI beg your pardon... is the topic not what I used my leatherman for today? That was in fact what I used it for yesterday.
Sent from my KFSOWI using Tapatalk
-
The Rebar and my Solarforce T1 got a good workout the other day.
My reverse lights aren't very bright at night (especially on the farm) so I wanted to sort that out, and I also never have enough light to see in my toolbox when I'm in the back of the truck. So Rebar to the rescue.
I had to take out a bunch of the dash and center console so I could run some wiring down to the back of the truck under the carpet.

I drilled and tapped some holes in my tow bar frame and installed a small 2000 lumen LED bar on it

So now I can see behind me

Then for the boot lighting I used the Rebar to wire up some LED running lights to my boot door circuit. Waaaay brighter now.
The Rebar is perfect for this kind of stuff. The electrical crimpers are VERY useful. They should be standard on all Leatherman models.

-
:D :D :D :D

-
@powernoodle said:
I cut open a couple of 50 pound bags of quick setting concrete mix with my Charge Ti while installing a flag pole. This is the first time I have dumped the dry mix in the hole and then added water, rather than mixing it first. The telescoping poles at www.uncommonusa.com are awesome, btw.Here's a tip I learned during my stint in the building-supply business: When anchoring a post in the ground, center the post in the hole; pour a bag of ready-mix in the bottom; tamp soil into the middle section, then pour another bag of ready mix at the top. Tamp firm. Cover the last bit with soil or sod. The next rain takes care of the rest.
I find that this method makes for a tighter fit, with less movement. Adding water makes things mushy, and it's harder to keep things aligned.
-
Installed a backup camera in my '09 Toyota Corolla. I thought I might be able to do it in the parking lot of the store where I bought it, just in case I needed to buy any additional supplies or tools.
It took a total of 15-20 minutes, and the only tool I needed was my Leatherman Charge. The wireless camera attached behind the license plate with some stickum. The power lead went through a notch I made with the file beside the license plate lamp, which I loosened with the Leatherman screwdriver. It was easy to route the wires and tie-in power from the backup light wires using the included T-taps. The pliers on the Charge were ideal for crimping. The other portion was the mirror/display, which fits over the existing mirror with spring-loaded clamps. The power wire was easy to route around the headliner and into a 12V socket.
That's it, all done. It has been working perfectly for many months ever since. I love the display built into the mirror, because it doesn't take up any extra space. The image only appears in the mirror when you are reversing, and the rest of the time, it functions like an excellent rear-view mirror, with built-in dimming.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login