CyberTool Lite Field Test and Review (Picture Storm!)
-
I figured "Picture Storm" was a fitting label

-
@detron said:
I agree the LED light on this SAK is not that bright, but if it is all you have (NOT LIKELY, but whatever) it will illuminate things enough to distinguish what is what.as a person who loves having the Mag glass, the LED light is a nice tool to be opposite the Mag glass.
I'm going to respectfully disagree here. I found the LED to be virtually useless. The problem I had with my Cybertool Lite was that the switch kept going on it my pocket. I'd usually burn through batteries in no time at all. When I needed the light much more often than not the batteries were either dead or so close to dead that the already dim light was useless.
I really wanted to to love the light... and I think they did a VERY good job of putting in inline with the bit driver so you could use it to illuminate where you were putting the screw driver... but the dim LED along with a poor switch design made it unreliable... and therefore useless for me.
on my main carry (Cyber-Yeoman) I have a Phillips opposite the mag glass., but this is not a common factory model.
Is it standard on any model?
the reason I love the CT Lite is for a factory model, I get the Bit Driver, mag glass, pliers, scissors, openers, blades, etc.
Can't disagree with anything there. All great tools, all things I use regularly.
the light is an extra, if I did not love the Mag Glass, then I would have been happier with a CT34 or CT41
My main carry is a modified CT. It has (among other things) the phillips against the mag glass. Not strictly needed as the bit driver has a large(ish) phillips, but it's nice to have a big thick one to really apply some torque on stuck big screws.
-
@detron said:
<a href="http://s833.photobucket.com/user/detronphillips/media/SAKs/custom 1/20140322_164028.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i833.photobucket.com/albums/zz255/detronphillips/SAKs/custom 1/20140322_164028.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>I love the new file, and though I know a saw can be useful outside, inside it is rarely needed.
Hey... that's looks a LOT like my custom knife! The only difference is that I have a watch opener blade and a combo tool opposite the two main blades. And I took out the layer with the openers... oh, and I added a fish scaler.
-
Here is my modded one thanks to Detron and GigaHz. Thanks again guys!

Its just a CT34 with the mag/philips layer added. I thought about a "lite" layer at one time but dont really like them and I have a seperate AAA light that to me works better.

-
-
@Etherealicer said:
Great write-up Detron
Those images you found on the HDD prove that IT-SpeSmurfpillst don't get paid enough
Just to play Devil's Advocate... Pliers, Cap Lifter, Philips and blade... so a 3-layer Mechanic could do this too?

No
, he also used the Torx (and he would have used torx more on a Mac or on a newer PC). :PI regularly use T6, T8, T10, T15, PH0, PH1 when dealing with computers, clearly that is CyberTool Territory. What annoys me is that you either have no metal file or you get metal file AND wood saw (what am I supposed to do with a wood saw in an office environment
).maybe you have to cut a hole in the wall for Ethernet ports? Lol
-
Great write-up Detron
Those images you found on the HDD prove that IT-SpeSmurfpillst don't get paid enough
Just to play Devil's Advocate... Pliers, Cap Lifter, Philips and blade... so a 3-layer Mechanic could do this too?

No
, he also used the Torx (and he would have used torx more on a Mac or on a newer PC). :PI regularly use T6, T8, T10, T15, PH0, PH1 when dealing with computers, clearly that is CyberTool Territory. What annoys me is that you either have no metal file or you get metal file AND wood saw (what am I supposed to do with a wood saw in an office environment
).maybe you have to cut a hole in the wall for Ethernet ports? Lol
We build with brick and mortar. This makes inside walls (1 layer of bricks) more than 15 cm tick (outside walls are brick | insulation | brick, and are about half a meter thick) :D, so even if the wood saw would get through, it would be too short :P
Its also the reason why we love wireless, far easier.
-
@Etherealicer said:
We build with brick and mortar. This makes inside walls (1 layer of bricks) more than 15 cm tick (outside walls are brick | insulation | brick, and are about half a meter thick) :D, so even if the wood saw would get through, it would be too short :PYeah, wood saw is pretty useless in that situation. I put a fish scaler in my custom knife though cause this makes a really great poking tool.

-
Excellent in-depth review.

When I was in IT, even as a programmer, I'd often find myself doing hardware tasks. I think I'd have preferred the ct34, but I can see how some folks might like the light/magnifier layer.
I generally find the vic 91mm pliers seriously inferior to the Leatherman keychain size tools, but in the specific instance of jumpers, I think they have a real advantage.
I actually have had to cut through drywall in the office environment before, but that was only once, ever, and was solved with a trip to a nearby hardware store and a $2 keyhole saw. Then again, in all my time in IT, I never needed a metal file. Not once that I can recall.
It looked to me like the vast majority of the bit-driver work was done with small philips screws. I have to wonder, honestly, how much of this whole thing could have been done with a Mechanic and a Rambler. Not knocking the CT, just trying to be honest here.
Had this been back in my IT days, I'd be a lot more excited about this tool. Now, though, The things that it's best at aren't anywhere near my daily need. However, you did an excellent job of showing this tool in it's native environment, and where it really shines.

-
@Lynn LeFey said:
Excellent in-depth review.
When I was in IT, even as a programmer, I'd often find myself doing hardware tasks. I think I'd have preferred the ct34, but I can see how some folks might like the light/magnifier layer.
I generally find the vic 91mm pliers seriously inferior to the Leatherman keychain size tools, but in the specific instance of jumpers, I think they have a real advantage.
I actually have had to cut through drywall in the office environment before, but that was only once, ever, and was solved with a trip to a nearby hardware store and a $2 keyhole saw. Then again, in all my time in IT, I never needed a metal file. Not once that I can recall.
It looked to me like the vast majority of the bit-driver work was done with small philips screws. I have to wonder, honestly, how much of this whole thing could have been done with a Mechanic and a Rambler. Not knocking the CT, just trying to be honest here.
Had this been back in my IT days, I'd be a lot more excited about this tool. Now, though, The things that it's best at aren't anywhere near my daily need. However, you did an excellent job of showing this tool in it's native environment, and where it really shines.

at work I have used many of the other bits, but if I run across more "bit work" I will add the info here, except for most of the stuff at work, (no pix allowed)
-
Well, now you've got me wanting to take apart some of my old HDD's, just to get the magnets and plates...

-
Built my PC in January 2016. All I used was a CT34 with my phone light and I used my Tread as a second screwdriver when I needed to tighten the bracket for the CPU cooler. Would be the perfect christmas gift for anybody considering building a PC.
Got my dad a Mechanic for christmas (he normally rocks a tinker for the last 30 years), he will love it i am sure. Except for the fact that some screws need a little more reach, a mechanic could honestly build a whole PC. A cybertool 29 definitely could, though I mainly got the 34 over the 29 for sake of the pliers (considered modding it to remove the scissors but those are pretty good and dont add a lot of width anyway).
Maybe I'll do a challenge to disassemble and reassemble a PC using only a Minichamp II (tweezers, not light). THAT would be fun.
-
Since this thread was started in ancient times...I wonder if the LED in the OP's LED module was the older, dimmer one...I understand at some point they changed the LED to a brighter one.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
