Supertool 300????
-
@captain spaulding said:
@captain spaulding said:
Watch both of these.
Stop it. This is torture :D.
Why, Because its Nutnfancy?
Because I want one but don't know how to get one that doesn't have misaligned handles.
might have to bite the bullet and just live with it. It does not effect function at all does it.
-
@jeremy1517 said:
I currently own a Wingman, Skeletool cx, and wave.I carry the Skeletool CX on a daily basis. If I'm being honest, I'm not a big fan of the Wave I have. It's gritty and hard to open. I think there are issues and I may send it to Leatherman.
Anyway, I'm debating whether to get the Supertool. Primarily, I like the longer bits and good pliers. I don't care so much about the outside blade.
How different is the Supertool vs the Wave?
I've been told the Supertool is a more heavy duty tool, is that true?
I want to make sure I buy a product that isn't similar to what I already have.
Thoughts on the differences between Supertool 300 and Wave??
I think if you enjoy EDC Skeletool, you would find difficult to switch to ST300, it is a mega beast, it would end up being a car tool for you, which isn't a bad thing.
-
You don't want a ST300. It's the size of a city bus and will weigh down your pants. Get a Rebar and be happy.
-
I carry a ST300 daily. Have never tried the Wave so I am unable to make a comparison. I have had every model of super tool and have used them for many things. They have never let me down. The ST300 addressed every concern I had about the previous ST models. I love it. I'm not bothered in the least by it's size or weight. It does what I ask it to do. I prefer it over all other multitools. My opinion for whatever it's worth.
Bob -
I agree with most of what everyone is saying. Try a Rebar.
-
-
Get a Surge damn it!!!
Ok, I got that out of my system. :)
Good luck. I hope you find one that you like.That's us mobile.
-
@jeremy1517 said:
the Supertool . . . Supertool . . . Supertool . . . Supertool 300I have incredibly refined powers of deduction, and sense that you want a Supertool 300. Therefore, you should get a Supertool 300.
-
The ST 300 is the only Leatherman I have. This is really a great house/yard tool but for me, it miss a Robertson bit BADLY!!! and I tend to not carry it often because of that. I find the flatheads redundant and would love if they made it with an interchangeable bit driver instead(for the Robertson). Like the ones on the wave or surge, but inside an ''old school frame'' like the ST300. A pocket clip would be a nice addition also( yes I carry this beast in my right pocket at home!).
But if your not a Canadian like me, you should love the ST 300, really ;)
-
go Rebar and add scissors
-
@kahyja said:
The ST 300 is the only Leatherman I have. This is really a great house/yard tool but for me, it miss a Robertson bit BADLY!!! and I tend to not carry it often because of that. I find the flatheads redundant and would love if they made it with an interchangeable bit driver instead(for the Robertson). Like the ones on the wave or surge, but inside an ''old school frame'' like the ST300. A pocket clip would be a nice addition also( yes I carry this beast in my right pocket at home!).But if your not a Canadian like me, you should love the ST 300, really ;)
One of the small bits on the ST300 will actually fit into a Robertson diagonally, in a pinch. Not an elegant solution by any means (and it'll mark up the end of the flathead,) but it works when you need it to.
Dem
-
@kahyja said:
The ST 300 is the only Leatherman I have. This is really a great house/yard tool but for me, it miss a Robertson bit BADLY!!! and I tend to not carry it often because of that. I find the flatheads redundant and would love if they made it with an interchangeable bit driver instead(for the Robertson). Like the ones on the wave or surge, but inside an ''old school frame'' like the ST300. A pocket clip would be a nice addition also( yes I carry this beast in my right pocket at home!).But if your not a Canadian like me, you should love the ST 300, really ;)
Is this what you're after? ;)
<a href="https://flic.kr/p/nkomgx" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7439/14002866197_6faf902ff2.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
@Obi1shinobee said:
go Rebar and add scissorsEven if the Rebar had a large bit driver it still can't hang with the big boys.
-
@kahyja said:
...I find the flatheads redundant and would love if they made it with an interchangeable bit driver instead(for the Robertson). Like the ones on the wave or surge...I don't get this love for the interchangeable bit driver
. OK guys I admit it, its because Wave doesn't suit my EDC.If you have a 3D Phillips tool you can use the LM bit adapter kit. Sure you have to carry it but then you have to carry the bits anyway.
Anybody worked out an elegant way of dangling the bit adapter from a keyring?

-
Rebar dont need hang with big boy , hack rebar can do whatever big boy can do and more ... Bring It BIG BOY


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

