Fried motherboard
-
I only do customs too as for along time the big companies have had differences in their designs that make someone purchase their replacement parts, in this case a motherboard. They would charge some ridiculous price of $179 when one could be had for $50. Not sure if they are still that proprietary but like others have said, lookup the exact model you have and check it out.
I guess the determining factor would be whether you can get a generic motherboard to fit and what the cost would be vs what kinda specs you have in the current system. If it is too old, you might wanna just build a new one!
I do buy brand name ones once in awhile but only if I want to test something or play with a linux distro and those dont need that high of specs to run good.
@Detron - I had a Packard Bell too but it would have been around the 1991-2 era! It was a 486-dx...woohoo! :)
-
Agreed. I have built all my computers saving the last one which I am now using. After pricing out the components, there was no way I could even build a system for so less.
-
boxed systems can be much cheaper, and if it meets your needs, then that is the best solution. I agree 100%!
but I do things that most people do not, and thinks like a dock in the case for SATA hot swap connections is a HUGE thing for me since I do so much file recovery.
I also like a case that is friendly to the owner, with quick change pieces and tons of fans!also, I need more heat protection than most, including hard core gamers. I do not game, but I use 4 Video cards.
Why would I do this? because GPU acceleration puts CPU speeds to shame! I compete in hacker challenges, and password recovery (cracking) is a massive choir that puts 4 video cards into overdrive! -
@detron said:
but I do things that most people do not, and thinks like a dock in the case for SATA hot swap connections is a HUGE thing for me since I do so much file recovery.
I also like a case that is friendly to the owner, with quick change pieces and tons of fans!I have recently been looking for some sort of option on this, I can't make up my mind on just slapping a eSATA panel on the back or some other solution like http://www.dx.com/p/2-5-3-5-ide-sata-hdd-to-esata-usb-2-0-docking-station-w-card-reader-113455
I find it important to be able to easily access fans too, and like vacuuming the dust from time to time before the fans fail. There's nothing worse than having someone bring me a PC that has overheating issues and I open it to find something like this:
:ahhh
:ahhh -
but I do things that most people do not, and thinks like a dock in the case for SATA hot swap connections is a HUGE thing for me since I do so much file recovery.
I also like a case that is friendly to the owner, with quick change pieces and tons of fans!I have recently been looking for some sort of option on this, I can't make up my mind on just slapping a eSATA panel on the back or some other solution like http://www.dx.com/p/2-5-3-5-ide-sata-hdd-to-esata-usb-2-0-docking-station-w-card-reader-113455
I find it important to be able to easily access fans too, and like vacuuming the dust from time to time before the fans fail. There's nothing worse than having someone bring me a PC that has overheating issues and I open it to find something like this:
:ahhh
:ahhhESATA on the back works, but the nice dock on top is much easier to use. I will gat some pics of it here soon to show why this solution is so much nicer
sent from phone
-
I have an external eSATA/usb (SATA&IDE) case with external supply already, which would work fine using an eSATA port on the back of my tower. It wouldn't be as convenient as the caddy on that link, but it will work. Obviously IDE only works via USB, and SATA has a toggle for USB/eSATA. An eSATA port is the only thing missing on my machine at the moment. Sadly none of the leftover bits I've collected from installing motherboards for others seem to have come with a port... I also pondered maybe getting a PCI Express SATA 3 card... I am keen on keeping some sort of IDE interface even though I rarely need it these days I still have a bunch of disks that are useful as backup devices.
-
@Whoey said:
I have an external eSATA/usb (SATA&IDE) case with external supply already, which would work fine using an eSATA port on the back of my tower. It wouldn't be as convenient as the caddy on that link, but it will work. Obviously IDE only works via USB, and SATA has a toggle for USB/eSATA. An eSATA port is the only thing missing on my machine at the moment. Sadly none of the leftover bits I've collected from installing motherboards for others seem to have come with a port... I also pondered maybe getting a PCI Express SATA 3 card... I am keen on keeping some sort of IDE interface even though I rarely need it these days I still have a bunch of disks that are useful as backup devices.here is the case I got. I LOVE it I think it was $88
Newegg TV: Rosewill BLACKHAWK Gaming ATX Mid Tower Computer Case
-
In general: I like it, it does have some things that I've often thought about...
Having the PSU below the mainboard is great for allowing more cooling around the CPU/graphics, but then you also have the issue of the heat rising from it being below.
I like the drive caddies, except needing to take off both sides to unhook a drive. (assuming the cables come out the back and loop back in?)
Power switch etc on top will be as useful as my current case, I had to mount it somewhere with low clearance so that my cats would not sleep on it and randomly power me off... doing the same with that case would negate the SATA plug on the top.
I'd also be happy with a version with no windows or lighting. I find it unnecessary for a tower mounted under my desk... my legs don't need an alien glow.
It has a few features much like my old tower, albeit vastly improved. I bet they charge 140eur for it over here too... :ahhh
-
@Whoey said:
In general: I like it, it does have some things that I've often thought about...Having the PSU below the mainboard is great for allowing more cooling around the CPU/graphics, but then you also have the issue of the heat rising from it being below. DOES NOT SEEM TO BE AN ISSUE, AND KEEPS THE COMPUTER FROM BEING TOP HEAVY
I like the drive caddies, except needing to take off both sides to unhook a drive. (assuming the cables come out the back and loop back in?) AGREED
Power switch etc on top will be as useful as my current case, I had to mount it somewhere with low clearance so that my cats would not sleep on it and randomly power me off... doing the same with that case would negate the SATA plug on the top. I HAVE NO CATS, BUT CAN SEE YOUR POINT
I'd also be happy with a version with no windows or lighting. I find it unnecessary for a tower mounted under my desk... my legs don't need an alien glow. ** I LOOKED FOR ONE WITH NO LIGHTS (NO LUCK), THE WINDOW IS VERY DARK, YOU CANNOT SEE IN, UNTIL YOU GET A FLASH LIGHT. I LIKE THAT I CAN SEE IN IF I NEED TOO.**
It has a few features much like my old tower, albeit vastly improved. I bet they charge 140eur for it over here too... :ahhh
-
In general: I like it, it does have some things that I've often thought about...
Having the PSU below the mainboard is great for allowing more cooling around the CPU/graphics, but then you also have the issue of the heat rising from it being below. DOES NOT SEEM TO BE AN ISSUE, AND KEEPS THE COMPUTER FROM BEING TOP HEAVY
I like the drive caddies, except needing to take off both sides to unhook a drive. (assuming the cables come out the back and loop back in?) AGREED
Power switch etc on top will be as useful as my current case, I had to mount it somewhere with low clearance so that my cats would not sleep on it and randomly power me off... doing the same with that case would negate the SATA plug on the top. I HAVE NO CATS, BUT CAN SEE YOUR POINT
I'd also be happy with a version with no windows or lighting. I find it unnecessary for a tower mounted under my desk... my legs don't need an alien glow. ** I LOOKED FOR ONE WITH NO LIGHTS (NO LUCK), THE WINDOW IS VERY DARK, YOU CANNOT SEE IN, UNTIL YOU GET A FLASH LIGHT. I LIKE THAT I CAN SEE IN IF I NEED TOO.**
It has a few features much like my old tower, albeit vastly improved. I bet they charge 140eur for it over here too... :ahhh
looking at the specs/images a bit further: http://www.rosewill.com/products/1772/ProductDetail_Overview.htm
It's the reverse of my current setup, currently my tower sits to my right with most of the venting facing the inner side of my desk, so I have to leave a gap between the case and the desk so it can "breathe" from the side. In yours I wouldn't need to leave much although it does have the backside breathing holes which are only complementary airflow not the main airflow as it is on mine. That's a definite bonus for cooling I currently don't have. It wouldn't be hard to disable the led lighting if it doesn't already have a switch.
It does look like a well polished case for not a whole lot of money... Sadly they don't seem to sell in the European market... only CAN/USA/MEX, Asia/Australia. :(
-
Think I will just pick up a new desktop. havent decided to build or buy yet.. Kinda tempted to build for some fun.
Josh
-
@firefightingjosh said:
Think I will just pick up a new desktop. havent decided to build or buy yet.. Kinda tempted to build for some fun.Josh
This site will help find low prices, AND ensure compatable parts!
-
Awesome thank you! Tempted to try my hand at building a quad core setup, with dedicate sound and graphics cards, SSD as the main HD and so on...
-
@firefightingjosh said:
Awesome thank you! Tempted to try my hand at building a quad core setup, with dedicate sound and graphics cards, SSD as the main HD and so on...if you run into questions, feel free to ask for help, there are several people here who could help ensure your money is not wasted on incompatible parts. that site is very good, if you start with either the CPU you want of the mobo you want, it will guide you from there. there is even a PSU voltage estimator, so you will know that your PSU is enough to run your system
-
Awesome thank you! Tempted to try my hand at building a quad core setup, with dedicate sound and graphics cards, SSD as the main HD and so on...
if you run into questions, feel free to ask for help, there are several people here who could help ensure your money is not wasted on incompatible parts. that site is very good, if you start with either the CPU you want of the mobo you want, it will guide you from there. there is even a PSU voltage estimator, so you will know that your PSU is enough to run your system
Awesome thank you all! Between guns, lights, multi tools, trucks and this now I think I will have to now buy something for my better half so she won't notice.. Lol
Sent from my iPhone using Tapatalk
-
@Whoey said:
I find it important to be able to easily access fans too, and like vacuuming the dust from time to time before the fans fail. There's nothing worse than having someone bring me a PC that has overheating issues and I open it to find something like this::ahhh
The case is one of the most underrated component of a computer and a part where a lot of people "save" money.
A premium case provides better air-flow while being quieter. I only use cases with dust filters, that way you can vacuum the filter once a month and not to worry about dust inside the case.
In the end the investment in a premium case is worth it as improved/better air flow increases live expectancy of all your hardware (especially HDD, and nothing can ruin your day like a broken HDD).
-
@Whoey said:
I find it important to be able to easily access fans too, and like vacuuming the dust from time to time before the fans fail. There's nothing worse than having someone bring me a PC that has overheating issues and I open it to find something like this::ahhh
The case is one of the most underrated component of a computer and a part where a lot of people "save" money.
A premium case provides better air-flow while being quieter. I only use cases with dust filters, that way you can vacuum the filter once a month and not to worry about dust inside the case.
In the end the investment in a premium case is worth it as improved/better air flow increases live expectancy of all your hardware (especially HDD, and nothing can ruin your day like a broken HDD).
I also see a lot of people try to "save money" on the mobo. to mobo to me is the most important part.
-
your case inspired me to have a look at what's available... It's been a long time since I looked at cases, there's some similar Thermaltake cases here for about 40-50 euros (without PSU)
like the Thermaltake Versa G2: http://www.thermaltake.com/products-model.aspx?id=C_00001943
-
@Whoey said:
your case inspired me to have a look at what's available... It's been a long time since I looked at cases, there's some similar Thermaltake cases here for about 40-50 euros (without PSU)like the Thermaltake Versa G2: http://www.thermaltake.com/products-model.aspx?id=C_00001943
that does not look bad at all!! very nice. I cannot speak to the price, I have learned (from this forum) that price is not standard across the world.
I researched cases for about a month before I built my current computer. (had to wait on the money, so it was easy to do)
the drive dock is my favorite feature, I know most people do not use those as frequently as I do, but for me it is a huge deal.I built that computer in March of 2013. I have used that dock on over 200 drives. so yeah, real life saver!
-
I can see how it would come in rather handy for me too... One of those desktop docks with IDE, SATA and usb/card reader integrated that I mentioned might be in the cards as a good alternative option, and given where my case sits, more accessible/practical.
I'm seriously thinking about rehoming my machine, as I mentioned the side panel access is reversed... and thus has reduced space for airflow between the desk and tower. I have finally gotten annoyed at the noise coming from my PSU under full load (500w Coolermaster with 120mm fan, overkill for my setup) and it seems to be a breathing issue for the PSU, as when I had it laid flat on the side with the side panel off it seemed to be much happier/quieter, yes I checked to see if it was a faulty fan. I really dig those Thermaltake cases, and it should be more than adequate for my needs, plus if it fits in where my current tower sits it has far better breathing from top and bottom (and sides/front) than my current setup. While I'm at it I'm very tempted to toss in either an old PCI Soundblaster Live! with front bay or Soundblaster Audigy 2 ZS I have in my drawer... sadly no official x64 win7 drivers for the Live! :( also not sure how/if I can use built in front audio with the Audigy... :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
