Show me your toolbox
-
Not sure if someone is interested, as it´s not really "tools", shall i show my machinepark with old cast heavy industrial machines, too - or would that be like bragging? It´s nothing special, i just like restoring/working on old machines - the same way as some others like to work on old cars.
By all means do.

+1 Lets see em!

-
@ducttapetech said:
Sweet! I hope it works out for you.
Nate@Lichtbote said:
Aye, that sounds cool.
Thanks!

-
OK, but i hope you expected not to much and are noe disapointed.

As mentioned everything here is in a period of getting a new structure/organization. Some of them are partly disassembled - each of them was in a running condition when i´ve got them, but as with old cars you can run them untill they break down, or check them and keep them running longer. I do this reorganization cause i had collected to much machines and had no longer the space to work on them.

The first old machine i got was a Mondial Celtic Lathe from the 60s. It´s belgian made, and they are great machines, no big ironhogs, as most stuff i collected more on the toolmakers side than for massproducing big parts.
The next is a filing machine. It works the same way as these small modellbuilders fretsaws (in fact you can use it as a big sturdy one, just make/get the adapters to mount the sawblades), but with many different files. This was the toolmakers machine for precise shaping before they got eroding machines. The table can be angled to get a always perfect angle, as the files movement is always the same - not as with hand filing. It´s german made, also from the 60s.
On the last pic in this post you can see my "little" saw, it has a pump for cooling-fluid, and can cut steel up to 160mm. It´s my "newest" machine, from the 80s.




-
This is something like a massive oversized benchgrinder. It´s made to sharpen lathe tools, they were mounted with the needed degrees on the tables with the clamp in the slot, then the table can be angled to get the other needed degrees. After that you turn on the machine, adjust the wanted feed with the big dial in front of the table, and then the table is moved from one side to the other, it´s mount is moveable. German, late 60s early 70s.
A mechanical press, to press bearings in or out, questioning prisoners, or whatever you need to give a lot of pressure. :D It´s a Klopfer DP2, 300mm workable way, rated for 2 tons - but don´t compare it with the chinese 2t press you can get at every net-toolshop, this baby weights 50Kg (without the table)
Last pic here is the shop compressor, austrian made by Alpha Technik, 2 cylinder with 500 liter/min, 10 bar, from 89. I had no intention to dissasemble it, but lately i needed to do it cause it took to long for generating full pressure - i found that the valve plates in one cylinder were broken. It will be fixed, but atm the small comp.in the shed is enough.




-
My mill, this is my oldest baby, german, from 49. Vario drive and very sturdy.
It´s a horizontal mill (as most of that date), but here you see a planned upgrade - a vertical fast running millhead from a Deckel FP1. :D
Here a pic before disassembling.
And a russian "workbench" drillpress from the 50s. 450/800/1400/2500/4500 rpm. For guessing it´s dimensions, the column is a massive 70mm rod.




-
This is a future project - it runs perfectly smooth, but obvisiously it never got any tlc. It´s discs can be sized up to 30cm/12", but i´ve planned to rebuild it with polishing wheels.
Additional i have a Greif bench grinder refurbished - also with this i´m not planning to make it grind again, need to turn some adapters then it will work with a brass wire wheel on one side and a satinizing wheel on the other. No pic yet.
That´s it - i think i´ve forgotten nothing.


-
Wow lichtbote, you got enough space for all that stuff? I always wanted a nice size workshop, I miss my little one, heck it was only 12' x 10' now I only have a desk :( but I always wanted to try my hand at one of those drill press/lathes or just a wood lathe, I did once make a all metal ball-peen hammer back in high school, wish I still had it, that little guy was nice! Just suck being limited.. JR
-
You have some really nice stuff there Lichtbote
I love the old machines! They were built to last a lifetime back in the day, unlike the machinery available now :D -
Great looking tools!
Thanks for thaking the time to show us Lichtbote

-
I´m a bit jealous, too.
Very nice assortment of tools. I guess you do work in metalwork and have this nice workshop for sidejobs/hobby projects? -
Wow. Thanks for sharing. That is an awesome lot.

-
@MadPlumbarian said:
Wow lichtbote, you got enough space for all that stuff?Hi Jr.
Space is always a problem here.
In our old appartment i only had a small desk in a multipurpose room. Then we moved into this house cause i wanted the garage and the driveway, to have a place where i can work on my racetrack-toy. At the beginning i had no other workspace here.
My first workplace here was a small corner of the corridor in the basement, see on the enclosed pic.
The house had a room in the basement where the oiltanks for the old heating were stored - after we had them scrapped i used that room (ca. 2m x 3,5m) to make me my first shop. It was and is for my modelbuilding, later then for making my movieprops and other small assembling jobs.
But the small milling and lathe jobs i made in it was to messy for the other things like airbrushing. So i´ve build me the small machine shop for the blue machines from the first pic - it was build in the small corridor corner my first shop was in. :D
Then i started collecting the industrial machines, and to have room for them the roadster had to left the garage. The garage had a small room (2m x 3m) on it´s rear side, where we stored the stuff for the garden. This will be my new shop for thegeneral dirty jobs i don´t want to do next to the machines, as soon as all the garden stuff is moved into the new shed.
I think after that i´m done with my spaceproblems.

Only that i still have no place inside for parking and working the car, as the garage is occupied by the machines. ::)




-
@DazMechanical said:
You have some really nice stuff there Lichtbote
I love the old machines! They were built to last a lifetime back in the day, unlike the machinery available now :DThanks DAZ.
Indeed, they are. But it´s still a risk to buy old machines - over the centuries they can have been abused, even small defects can cost you a fortune and delay a restoration as parts are not available anymore and need to be made as a one of.
A new chinese machine on the other hand usually has it´s 2 year guarantee, replacement parts are easily available, and is mostly not that bad for hobby use.
-
@sparky415 said:
Great looking tools!Thanks for thaking the time to show us Lichtbote

My pleasure - most of the time i get headshaking when people see them.

Old cars are more accepted as a hobby.
-
@Lichtbote said:
SnipVery cool and a very old school radio

-
@lowtech said:
I´m a bit jealous, too.
Very nice assortment of tools. I guess you do work in metalwork and have this nice workshop for sidejobs/hobby projects?Hmm, sort of, but not really. :D
After my army time i was in the metal-business, but later went into a office job - but never gave it up completely. I worked on maintaining machines as a sidejob, cause i love it (other than the comfortable office job).
I needed machined parts from time to time for my movie prop hobby. I have friends mit metal working companies, but off course regular business is more important than my hobby parts, so i had sometimes a few months to wait for a small part. Then i remembered that i learned that stuff and just needed some machines. So i bought the smaller chinese hobby machines - they still do most of the work for my hobbies.
But having them made me want to have old industrial machines, too - for the same reason people buy old cars, their coolness and history.
It´s fun to restore them to working as a new one ..... and some day when i´m retired, i plan to make them like brand new, including new paint like from the factory. 
You see, just a hobby - but from time to time, when i have time, i make some parts for friends and their movie props, too. To help them out.
-
I like this thread, so I'm dragging it back up! Here's my corner of the "shop", to the left is the full-sized bench with all my dad's tools. I got to commandeer a section for all my bike work, and my growing tool selection. The Craftsman boxes are new to me, my uncle upgraded and just gave them to me! He also gifted me the full set of Craftsman wrenches, ratchets, and drivers that fill them for my graduation. Easily my favorite place in the house.

-
@Higgins617 said:
The Craftsman boxes are new to me, my uncle upgraded and just gave them to me! He also gifted me the full set of Craftsman wrenches, ratchets, and drivers that fill them for my graduation.That´s cool. 8)
I wish someone had done that for me when i was young. In my family noone ever really understood why i love to get my hands dirty.@Higgins617 said:
Easily my favorite place in the house.Something i totally understand. :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


