Detron's Collection wiki (Very pic heavy)
-
BO Blast
Spoiler:
The Leatherman Blast is one of my favorite Multitools, it is not perfect, but I really feel prepared when I carry it. this particular Blast is Black-Oxide coated and is
dated 1212 /1212.First lets look at the basic design
Though the Blast is thicker than a PST, the basic design seems to follow that basic origin, except for the locks, and the Zytel
Leatherman provided the following information, (hidden since so many do not need this info)
CLOSED LENGTH: 4 in | 10 cm
WEIGHT: 6.9 oz | 196 g
BLADE LENGTH: 3.0 in | 7.62 cm
1 Needlenose Pliers
2 Regular Pliers
3 Wire Cutters
4 Hard-wire Cutters
5 420HC Blade
6 Saw
7 Spring-action Scissors
8 Wood/Metal File
9 Small Bit Driver
10 Phillips Screwdriver
11 Large Screwdriver
12 Small Screwdriver
13 Ruler (8 in | 19 cm)
14 Bottle Opener
15 Can Opener
16 Wire Stripperthey failed to count the lanyard ring
and they also include a Downloadable guide
WEIGHT (this was the most surprising part!)
the first thing I noticed about this tool was the weight, it seemed light, not cheap, but lighter than I expected.
so if we see where this tool falls compared to other Leather tools, we might find some surprisesKick 5.2
Flair 5.5
Juice Cs4 5.5
Juice KF4 5.5
Fuse 6
Pulse 6
Rebar 6.7
Juice Xe6 6.7
Blast 6.9
Crunch 6.9
Sidekick 7
Wingman 7
Wave - Original 8
Charge TTi 8.2
Charge AL 8.3
Charge ALX 8.3
Charge XTi 8.3
Charge Ti 8.4
New Wave 8.5this puts the Blast in a great spot as far as weight goes, and for those who are put off by weight it is a great balance of tools to weight ratio.
it weighs less than the Wingman and the Sidekick, :o and is only slightly heavier than the Juice Xe6TOOLS
Needlenose Pliers, Regular Pliers, and Wire Cutters
the needlenose pliers are the old, non-replaceable wire cutter version, but they are a very capable plier head.
notice on mine the first "A" in Leatherman does not show the top hole, but the second one does
The wire cutters do include the hard wire notch.the teeth on the plier head are ample, and provide excellent purchase
420HC Blade
I thought this blade looked extremely long, but it turns out it's length is a mirage due to it's thinness
here you can see it next to the waveSaw
the saw seems very sharp and I imagine that the low height of this blade would also make it a great saw for small challenges.
Scissors
The scissors on the Blast are really good, not to the level of Victorinox scissors, or the Surge for that matter but as for a small set included on a Leatherman tool, they are great.
Wood/Metal File
I love a diamond file, but the Blast does not have on, however this file should solve any small file needs that could pop up. it will not sharpen your knife blade to a razor's edge or anything, but it will remove material as needed. The metal saw at the base can cut small metal as needed too, though I have never actually tried this myself with a Leatherman, I have done it successfully with a SwissChamp.
Small Bit Driver
I know many see this as a useless tool on a full sized MT, but I love it and use it on a regular bases
Phillips Screwdriver
The Phillips screwdriver on the Blast is awesome, full 3D and a good reach that can turn recessed screws.
Large Screwdriver
Though Leatherman titled this a screwdriver, it can also be a "Light-Duty" prybar. I use it to open paint cans and wiggle boards into place with no ill affects.
Small Screwdriver
this smaller flat head screw driver has a good reach and is a nice size for many common tasks
Ruler (8 in | 19 cm)
many people joke that the ruler on a MT is just a way to get the tool count higher, well, I use it all the time to determine how long a screw I need, or how big of a gap I need to fill, etc, etc. to me it is a valuable addition.
it is very accurate, my camera angle is the reason it looks slightly off here, best I could capture with a point and shoot
Bottle Opener, Can Opener, Wire Stripper
I have no issues in using Leatherman's can opener, I am not saying it is the best on a MT or SAK, but I like using it. I do not really use a bottle opener often, but I imagine this would not be my first choice when it came to that duty, however, I could open a bottle, and for me, that is good enough since I would not go thirsty.
I have used the wire stripper several times, and after a little practice, it works very well.Now, I noticed that the can opener was not the outermost tool, and I thought this might cause a problem with the tool itself getting in the way, so I did a little experimentation and realized I could not manage to get the tool body to get in the way no matter how hard I tried.
Lanyard Ring
Not much to say, this is thin, but there is one here for those who would want to use it. I have used it to drop my tool down to a worker below before, without worrying about breaking my tool
Grip Comfort
I personally love the feel of the Blast in my hand, I have large hands, (8.5" wrist, 9" finger span from pinky to thumb, and 8" palm base to tip of middle finger)
the Zytel along with the finger cut-outs, makes this tool a joy to use.Lost space due to the Zytel
Yes the Zytel takes up room, and more tools could be included if this material was removed. This is a larger problem the smaller the tool, if you look at it from a percentage view.
the Kick, looses the same amount as the Fuse and Blast, but Kick had less to start with, so a higher percentage was lost to incorporate this material.
for example, the "Tool Room" is the same between the Rebar and the Blast (if not identical, then only a slight difference)Negatives
To me the Blast only misses on a few areas, and those areas are not always important.
I love the flexibility the large bit adapter provides, when coupled with the bit kit, bit extender, or both. I know this is a controversial item to some people, but I like having it.
The sad truth is I have carried the full bit kit for over a year, and never once needed to use it. however, I know as soon as I leave it home, I will need it. to me it is a piece of mind, nothing more.No one hand open, very useful, but not a deal breaker for me.
no reamer
Summary
The Blast is my favorite Leahterman tool that does not have OHO abilities. it has everything on it except the reamer and large bit driver, and feels great in the hand.
if this was the only tool you ever carried, it could handle 98% of what ever life threw at you. I am not saying take a job as a mechanic and ONLY have this tool, but when away from your real tools, this should get you by with ease.Positives
Light
Tons of tools considering the weight
Comfortable to use
Every tool locksNegatives
No One hand Open
No reamer
No Large bit driverthough I have 3 negatives, they are all items I can live without. I am sure the knife blade could act as a reamer in an emergency, OHO is a convenience only for me. so I am down to one real negative, that I have proven is a piece of mind issue only.
I Love the Blast, and the Black Oxide version is even better!
-
Troubleshooter
91mmSpoiler:
The Troubleshooter to me is the perfect mix of traditional tools for indoor use.
I love the Mag glass, and inline phillips, but this is a very capably SAK without them.This SAK has the following tools:
Front
Large Blade, with thicker tang
Small Blade
File (older, less aggressive)
Scissors
Pliers
Can Opener
Cap lifterBack
Awl (With sewing eye)
Hook
Chisel
Phillips Driver
KeyringScale
Tooth pick
Tweezers
Ball Point Pen
Straight pinScales are Black Plus (originally they were Red Marlboro scales that were melted)
Tang Stamps
-
Hoffritz Limited Edition 2
91mmSpoiler:
The Hoffritz Limited Edition 2 is very similar to the Troubleshooter that came later. It is one of my favorite SAKs collection wise, because it is a limited production SAK. not crazy scarce, but limited and mine is in really good shape. I bought it on ebay, it was listed as a SwissChamp
but I knew better.you can see that mine is # 0290 / 2000
here is the can key
here is the metal inlay on the front scale
here is the metal inlay on the back scale
This SAK has the following tools:
Front
Large Blade, with thicker tang
Small Blade
File (older, less aggressive)
Scissors
Pliers
Can Opener
Cap lifterBack
Awl (With sewing eye)
Phillips Driver (with can key)
KeyringScale
Tooth pick
TweezersScales are Red, with inlaid "Hoffritz" and "LIMITED EDITION 2"
Tang Stamps
-
Ranger
91mmSpoiler:
the Ranger has a great set of tools, with a high tool density.
This SAK has the following tools:
Front
Large Blade, with thicker tang
Small Blade
File (older, less aggressive)
Scissors
Wood Saw
Can Opener
Cap lifterBack
Awl (Without sewing eye)
Corkscrew (fluted)
Fine Flat Driver
KeyringScale
Tooth pick
TweezersScales are Red, with inlaid "Camping" and tent logo
Tang Stamps
-
Explorer
91mmSpoiler:
If I did not use the CyberTool layer so frequently, then this would be my usual carry. I love the explorer, it is a sweet SAK for a user who like the Inline Phillips or the Mag glass
this one being the older version, has the 8x mag glass, and the longer phillips.This SAK has the following tools:
Front
Large Blade, with thinner tang
Small Blade
Scissors
Magnifier (older plastic holder and 8x glass)
In-Line Phillips (older longer reach)
Can Opener
Cap lifterBack
Awl (With sewing eye)
Hook
Corkscrew (solid)
KeyringScale
Tooth pick
Tweezers
Straight PinScales are Camo
Tang Stamps
-
Altimeter
91mmSpoiler:
The altimeter is basiclly a Climber with electronic scales. I thought the electronic scales were a must have, until I got some, and the novelty wore off pretty quick.
I think they might be useful, but my G-Shock Rangeman has more sensors and easier to access.This SAK has the following tools:
Front
Large Blade, with thinner tang
Small Blade
Scissors
Can Opener
Cap lifterBack
Awl (With sewing eye)
Hook
Corkscrew (solid)
Mini Screwdriver stored in the corkscrew
KeyringScale
Tooth pick
Tweezers
Straight Pin
Ball Point PenScales are Ruby Plus with electronics
Tang Stamps
Battery used
CR1225 Here are some on Amazon.com -
-
I like that one Detron, but I think I still prefer the black of the AL myself...that file is sweet though
It sort of reminds me of the aggressive side of the files on my Juice KF4 and Original Wave. -
@Monrogue said:
I like that one Detron, but I think I still prefer the black of the AL myself...that file is sweet though
It sort of reminds me of the aggressive side of the files on my Juice KF4 and Original Wave.yeah, I did not NEED this, but they do not turn up every day, so I thanks to the enablers around here, I felt I had to buy it
-
I like that one Detron, but I think I still prefer the black of the AL myself...that file is sweet though
It sort of reminds me of the aggressive side of the files on my Juice KF4 and Original Wave.yeah, I did not NEED this, but they do not turn up every day, so I thanks to the enablers around here, I felt I had to buy it
Ha, since when is necessity a requirement around here for buying MTs/SAKs

-
Glad it arrived safely after all.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login









































































































