Gerber Flik vs. Leatherman OHT
-
You need a Flik too.
Nate
Tell me about it ! I also have to get a Surge. Hate this site :)
Sak's rule !
For some reason I thought you already had a Surge, but I don't know why I thought that

-
Monrogue, a great writeup and good read! Thanks for doing that.
I do own both of these tools, although I do use them regularly enough to comment on long term use. I tried using OHT for a short while, but can never get use to the small tools with a big frame(I have mid sized hand). I can see if someone needs a pliers in emergency situation, maybe it's a great tool. Otherwise, I am still more attached to my Wave/Charge as usual.
Flik is a little different for me, mostly it is so easy and fun to play with the pliers. However, I don't like how inconsistent the tools are being opened, and it could be something to do with QC. Also the middle tools are a little too small for my taste, I think even the 91mm SAK offers better or more usable tool than Flik.
-
You need a Flik too.
Nate
Tell me about it ! I also have to get a Surge. Hate this site :)
Sak's rule !
For some reason I thought you already had a Surge, but I don't know why I thought that

you both need a Surge.

Again Kyle, great write up. The Flik is one of my Top 3 plierbased multitools.
Nate
-
@comis said:
Monrogue, a great writeup and good read! Thanks for doing that.I do own both of these tools, although I do use them regularly enough to comment on long term use. I tried using OHT for a short while, but can never get use to the small tools with a big frame(I have mid sized hand). I can see if someone needs a pliers in emergency situation, maybe it's a great tool. Otherwise, I am still more attached to my Wave/Charge as usual.
Flik is a little different for me, mostly it is so easy and fun to play with the pliers. However, I don't like how inconsistent the tools are being opened, and it could be something to do with QC. Also the middle tools are a little too small for my taste, I think even the 91mm SAK offers better or more usable tool than Flik.
Yeah, I agree about the smaller tools on such a large frame. The Flik has this issue with the drivers, but the frame isn't quite so bulky. I also agree about the SAK drivers. Since my Rogueneer has a phillips and the various flatheads, the Flik's drivers aren't much of an issue really. And the pliers are fun to play with indeed ;)
-
You need a Flik too.
Nate
Tell me about it ! I also have to get a Surge. Hate this site :)
Sak's rule !
For some reason I thought you already had a Surge, but I don't know why I thought that

you both need a Surge.

Again Kyle, great write up. The Flik is one of my Top 3 plierbased multitools.
Nate
Thanks Nate, and sorry, the Surge is one I know I'd not get along with due to the size and especially weight of it. Tool loadout is great though. That thing won't work in a pocket, although with a pocket clip...
NO, mustn't give in to the enabling mindset :ahhh -
NO, mustn't give in to the enabling mindset :ahhh
No MT afficionado or collector should be without one. What are you waiting for?

Now don't you start too
I think the Surge would just be far too big for my smallish hands. Now if someone could post a pic of a OHT and Surge side by side for reference... -
@Lichtbote said:
Atm. i have a bigger serrated blade from TexasToolCrafters on it´s wayNice one.

Have any more info on it? Is this something the make on a side and don't advertise?
I would have though the serrated blade on OHT cannot be much bigger/longer as it would interfere with the flat blade screwdriver bit at the top.
-
NO, mustn't give in to the enabling mindset :ahhh
No MT afficionado or collector should be without one. What are you waiting for?

Now don't you start too
I think the Surge would just be far too big for my smallish hands. Now if someone could post a pic of a OHT and Surge side by side for reference...I'd love to post a comparo pic but I'm off to work now. BTW, they are of comparable size so you should be fine with it if you're OK with the OHT.

-
NO, mustn't give in to the enabling mindset :ahhh
No MT afficionado or collector should be without one. What are you waiting for?

Now don't you start too
I think the Surge would just be far too big for my smallish hands. Now if someone could post a pic of a OHT and Surge side by side for reference...I'd love to post a comparo pic but I'm off to work now. BTW, they are of comparable size so you should be fine with it if you're OK with the OHT.

Well please feel free to post a pic when you get the chance. I know they're the same length at least, but the Surge is probably a good 3oz heavier, which makes quite a difference, at least to me. I know a pocket clip would help negate that much like with my Charge. I'm not sure I'd be willing to pony up the cash just to try one out though. I don't have any stores where it's available for me to handle before buying.
-
@Monrogue said:
So when you say you're getting a bigger serrated blade, are you removing the small flathead to allow room?If i have to (never used it up to now, so will probably not miss it very often
).But i see a chance that, due to the blade flatten down to the tip, the small flathead may stay inside the tools silhouette. We will see. :D
-
@babola said:
Have any more info on it? Is this something the make on a side and don't advertise?I would have though the serrated blade on OHT cannot be much bigger/longer as it would interfere with the flat blade screwdriver bit at the top.
They sell such stuff on ebay. It´s the stuff they replaced at their builds with a damascus, S30V or anything that way.
I see a chance to get it fitted in, but i have to try it to really know.

-
NO, mustn't give in to the enabling mindset :ahhh
No MT afficionado or collector should be without one. What are you waiting for?

Now don't you start too
I think the Surge would just be far too big for my smallish hands. Now if someone could post a pic of a OHT and Surge side by side for reference...I'd love to post a comparo pic but I'm off to work now. BTW, they are of comparable size so you should be fine with it if you're OK with the OHT.

I will help you out.



Nate
-
Thanks Nate, you saved me some time today for taking and posting pictures :)
We're now both being labeled as 'Surge enablers' hahaha, not to mention JAfromMn ;)
I'm sure if zoidberg posts few more photos of his blunt-nose Surge, Kyle will succumb to the pressure and eventually give in :)
-
-
The Zoid-man has it right - I'm more of a needlenose plier guy. So thanks for the pics Nate, and you're right - they are quite comparable in size. The considerable increase in weight of the Surge is a problem though. I'm afraid that even with a pocket clip, it would just be too heavy and would be quite a noticeable hunk of metal in my office pants. Believe me, I am tempted, but I imagine it would just be considerable overkill for me. The tool loadout is great though. Makes me wish there was a Charge variant of it, although Breezy can hook me up with such a tool...that will likely be next on my list
My ReCharge TTi will get an upgrade
Gotta love this place - I compare two MTs and it turns into a bunch of enablers trying to get me onto the Surge >:D -
@Monrogue said:
The Zoid-man has it right - I'm more of a needlenose plier guy. So thanks for the pics Nate, and you're right - they are quite comparable in size. The considerable increase in weight of the Surge is a problem though. I'm afraid that even with a pocket clip, it would just be too heavy and would be quite a noticeable hunk of metal in my office pants. Believe me, I am tempted, but I imagine it would just be considerable overkill for me. The tool loadout is great though. Makes me wish there was a Charge variant of it, although Breezy can hook me up with such a tool...that will likely be next on my list
My ReCharge TTi will get an upgrade
Gotta love this place - I compare two MTs and it turns into a bunch of enablers trying to get me onto the Surge >:DIf the Surge's weight is an issue for you then I'd advise you to pass...it is indeed very heavy. What you get with its phenomenal toolset you loose on portability and size. For many of us that's not the issue at all, but if your hands aren't large-ish and you're constantly aware of its weight while carrying it around, then yeah...nah... 8)
ReCharge TTi or even a Mini-Surge may be a more suitable option for you, then. And Breezy can do either of them

-
Surge is the heaviest MT I know of.
-
I wouldn´t want to carry it loosely in my pocket, but sheat-carried on the belt it´s no issue.

-
@babola said:
BTW, just found this...</topic/4910 :(Hope it's an isolated incident and not matter of course.
Just a little update on what I said earlier regarding this topic. Last night I got my Flik and deployed the pliers for a little squeeze test. I didn't go two handed to really push it, but I squeezed with considerable force up to the max of my hand strength. There was no sign or sound to make me think it was going to break, only a slight flexing, which I've noticed in every MT I own (other than the MP400 and the OHT as their handles close all the way and can't flex). So I have no worries there. I'd say the Flik can be just as strong as other MTs, but the potential for more breakage is there due to the design of the mechanism, in comparison to the OHT.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


