how do ya sharpen?
-
Always by free hand. Sand paper and mouse pad for my convex edged blades and a diamond hone for my straight edged blades and always finish on a leather strop with sharpening compound for both. Hair shaving blades!
-
I do all my sharpening freehand, it takes a combination of angle and pressure to get it right. On my kitchen knives I use a whetstone, medium & fine grits, then give a touch on my steel, as for my Leathermans and SAKs, they don't get half the abuse of my kitchen knives do, so I normally just have to use a daimond hone, fine & extra fine grits. I want to get a leather strop soon to see just how sharp my tools can really get.
-
Lansky for my folders and smaller blades and freehand for my bigger knivies, tomahawk and axes.
Nate
-
@jerseydevil said:
I've had great results with the Lansky system.
I'm not great at sharpening freehand, but am getting better at it......+1
I'm with JD
-
Sharpen; freehand with a stone, the bigger the better, I have mill stone, soft and hard Arkansas, diamond blocks and more types of aluminum oxide axe and scythe blocks stones and pucks than you can count.
Finish by stropping on corrugated cardboard across the ridges not with them. This is a technique I picked up from someone at Blackjack knives. Cardboard is just abrasive enough to polish up a true razor edge. Works almost as well as a traditional barbers strop. Works well on Vic Trekkers serration pattern too.
For Quick touch ups on work blades/in the field I use a smiths pocket pal x2.
For major work out comes the WorkSharp, great for fixing a truly bad grind, damaged edge, or if you make knives.
-
Spyderco Sharpmaker 100% awesome
-AdmSlc
-
I do my sharpening free hand on a bunch of different sharpening stones and files.
-
spyderco triange sharpmaker rules.
-
I started off the the Lansky, but have since moved to doing most of my sharpening on a really cheap four sided diamond block. It's really easy to use, and quick too. Much less fiddly and irritating than the Lansky.
I bought it to sharpen the Mora I was given and have found I prefer using that for all my knives. Was only £10 too.
-
@Cupboard said:
I started off the the Lansky, but have since moved to doing most of my sharpening on a really cheap four sided diamond block. It's really easy to use, and quick too. Much less fiddly and irritating than the Lansky.I bought it to sharpen the Mora I was given and have found I prefer using that for all my knives. Was only £10 too.
pics please??

-
@JBW1 said:
I watch a butcher while he is gutting/skinning our animals, and the way he explains using a steel is to act like you are shaving the steel or something? Then does it freakn quick.I use the Lansky and had always decent results. I'm no expert but regarding the butcher's way... I think it depends what you are going to do with the blade. For meat and foods and soft stuff in general i think a razor like edge has its place, but if you are going to cut thick cardboard, rope, carpet or heavy stuff, tha's another story... Then i maybe wrong so someone can correct me.

-
I started off the the Lansky, but have since moved to doing most of my sharpening on a really cheap four sided diamond block. It's really easy to use, and quick too. Much less fiddly and irritating than the Lansky.
I bought it to sharpen the Mora I was given and have found I prefer using that for all my knives. Was only £10 too.
pics please??


from here:
http://cpc.farnell.com/jsp/level5/module.jsp?moduleId=cpc/687438.xmlThey're almost always on special offer (but you have to know the special offer code) for about £10 all in.
They do ones not in a block which are a bit cheaper.
It's Rolson branded, but that doesn't really mean much. It's not exactly the best built thing in the world and one of the coarser grits isn't perfectly flat, but it's good enough to quickly and easily get all knives shaving sharp. -
Another vote for the spyderco triange sharpmaker
-
Hmm... Guess I should take a look at that Rolson stone. ☺
-
I’m not a sharpening Guru. I can’t get a razor edge from sticks, rods, stones, window glass, or coffee cups.
So I use a Chef’s Choice Model 120 followed by a few feather-light passes with an accusharp. I get hair-popping, razor-sharp edges in under in 2 minutes.
-
I sharpen most of my blades freehand ... I have a Lansky and a Spydie Sharpie as well.
I don´t get warm with the Lansky somehow. The Sharpie is good for a quick touch up.
But I use to sharpen them the way it is neccesary. If there´s a chipped blade, I use a coarse skythe stone, then go to a 320 Indiga stone (synthetic) - eventually some touch up with a 800 grit stone and for fine polishing a 3.200 Arkansas Oil Stone.
Then stroping the blades on a self made leather-strop. Compound or not, depends.But in case of an emergency a ceramic coffee mug and a leather belt work great for most sharping tasks.
If I can add, that most people use take to often their stones. I use the strop more often than my stones for some touch up. The stones just come to action when I don´t come any further with my strop. (And it was for free - expect a piece of pine wood and some leather)
Just my .02 Cent.
-
When finishing off with a leather strop, does it matter which way you pull the blade, ie, like when you sharpen
-
Thank you sir :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login